Liczymy pasujące modele…
This is a platform intended to be placed (floating) on a water container to allow the bees to drink safely without drowning . printed in PLA with gyroid 10% infill. model is now exclusib^ve to makerworld:…
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
My wife wanted this to fit US soda bottle. I modified the Fusion 360 source (thank you for publishing!). I had to change the thread pattern – had to print several tests to get it correct. This new thread pitch and diameter is for US soda…
Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.
The bottle cap fits on ‘Kavodrink Tritan’ bottles. There are two versions: one without knurling and one with knurling. If you want to be extra safe that your print is food-safe: How to make food-grade 3D printed models - Prusa Printers
This float allows you to submerge the cans and then be able to take them out very fresh. The flexible tabs allow you to hold the cans well. Remember to tie the float well with a rope! For standard 330ml can measurements. 350ml or 500ml.…
If you really need to impress someone, just bring out the Shrek Drink Coasters. If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
A simple cover for the Adafruit Trinkey QT2040. For making a DIY USB Nova: usbnova.com But I also included a version of the case without the NOVA text printed on it, so you can use it for any project. You also need 4x M2.5 4mm screws to…
This two part coaster is designed to stop it sticking to the condensation on an iced drink glass by creating an air gap between the actual coaster and a drip tray. It has been given a nautical theme with a 3 ply twisted rope encircling a…
This is an extension to my original drinks can ring-pull opener, which is designed for people who have weak forearm and grasp strength (such as MS suffers – and one in particular), although of benefit to anyone who lives with such a…
My camp chair has hard arm rests and didn't come with a drink holder. So I've created one that folds up when not in use. Camp chair is a Boab brand. Prints in place and depending on your printer tolerance and accuracy, you may require…
Glass Drinking Straws Dryer, no glue, no screws. Easy to print.
Print with 20-25% infill
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
A drink/bottle coaster diffusor with simple LED lighting. The goal was to construct a small housing for a LED sticker without support. I hope you like it. It consists of a lid and bottom that are held together with a bayonet catch. The…
I designed a drink bottle holder for my kids so that the bottle is always close by. The holder is simply attached to the bet and Suitable for boards up to 23mm thick. The board should not be too thin, as the grip will not be optimal. To…
Inside the container are ridges to see how many powder you used. You can use my cap, or you just can use every standard PET bottle cap. If you love this design and want to see more fun projects like it, consider joining my club on…
English Gardena Sprinkler Mount 3in1 This mount is designed for the following Gardena Sprinklers: Classic Polo Comfort Aquazoom AquaZoom M (Other Gardena sprinklers have not been tested yet, but they might fit.) What you need: Broom…
Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress
Printed In PETG @ .2. Have included files for one color and also for MMU.
DICE CONTAINS: 1.) FACE- DRINK (DRINK 1 TIME) 2.) FACE - 2X (DRINK 2 TIMES) 3.) SKIP - (YOU DON'T HAVE TO DO ANYTHING) 4.) DARE - (TAKE A DARE, AND YOU MUST DO IT) 5.) SHOT - (TAKE A SHOT OF DRINK OF CHOICE) 6.) CHOOSE WHO DRINKS - (YOU…
Set of thematic drink coasters with stands. Color change at layer height. Models are scalable, but when scaling down it will be better to use nozzles with a smaller diameter than 0.4mm Printer setup: Nozzle diameter 0,4 10% infill Layer…
When using a powerful pump and large areas of irrigation, a powerful tool is required. The spray angle is adjustable. When assembling the case, use super glue. P.s. V2.0. For ease of printing, a disassemblable model has been created. For…
Use the 3 color layer changes as specified in the .3mf file. Add an optional peel-n-stick cork backing.
A simple stand to dry straws after washing. I printed it with organic supports, using 0.2 mm layer height with regular PLA. It works perfectly. I’ve attached a Gcode file with organic supports in 0.2 mm.
Hello, Today I have for you a Keg for pouring drinks into 4 glasses . It is the highlight of every party! Automatically divides drinks into 4 glasses. Absolutely amazing! Interesting appearance. For proper functionality, you need to use a…
Držák Plechovek který pasuje do otvoru vedle řadicí páky jde tam pěkně na tucho ale sedl. (U mě nejde použít klasicky)
This is a nice curved stackable drinking cup. I've made it with prusament petg and it survives the dishwasher. I've used the following settings to make it water-tight: Ironing - Important to make the floating bottom water tight! In…
Remixed from: Bees water platform to drink with bottle reservoir by Petos Safarik | Download free STL model | Printables.com Added perches on all sides so that humming birds can use it as a bird bath or a drinking platform. Printed in red…
You can apply cork to the underside of the coaster to help keep it from slipping on the table.
I was getting sick and tired of using a pliers to get the sprinkler head out of the ground, so I made a tool that works on the Orbit Voyager II Gear Head Sprinkler this make removing and installing the sprinkler heads easy. I would…
I didnt love the velcro straps in the wind so I am designing a nicer sturdy clamp for the patio railings. Should only need two to secure the gates. Plus they look a bit nicer than the velcro.
A colored ring to identify a bottle from several identical bottles (for example in kindergarten) DM Babylove Trinkhalmflasche 330ml Print settings: 0.2mm layer height 0.4-0.6mm nozzle diameter no supports 100% infill PETG is recommended…
Total size of organizer: 99mm x 84mm x 6.8mm distribution of space: 2x - 20mm x 39mm 2x - 25mm x 39mm 2x - 79mm x 19mm 1x - 14.6mm x 39.5mm Snap on Lid designed for 0.2mm tolerance printing.
printed in two parts and glued in any position from asa material
Utilizing mrmila's model with a few changes a couple of versions, depending on your needs ie table, wall, embossed, engraved multi coloured (in file) single extruder Drink responsibly
I wanted to celebrate the start of summer with a new model! I decided to try out make a swan floatie as a trinket dish. Print flat with some support under the head. MMU 3MF included Category: Sculptures
Simple drink coaster for your coffee.
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…
Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Print the test Piece → Measure it with your callipers → Input the measured results in the Google Sheet Calculator → Get the results from the sheet with calculated Shrinkage → Input in your slicer → Voilá, perfectly calibrated print's…
Add a sip of humor to your keys with the "Ghost Drinking Coffee Keychain" – a whimsical, easy-to-print accessory that proves even ghosts need their morning coffee. It's a humorous and adorable nod to coffee lovers and ghost enthusiasts…
Life-size double-wall insulated LEGO cup! fits standard cans and keeps them cool! Uses a small wedge to keep the cans from falling out of the cup, and a small venthole in the bottom. Make sure to drop a follow and a like if you want to…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
UPDATE: 7/22/2025 YETI Colster/Koozie model added in the files section for standard diameter cans. If you use PCTG filament only 2 perimeters and 15% infill are necessary, no box modifier. Enjoy! UPDATE: 7/19/2024 Skinny can model added…
This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and You should print the test piece with regular settings…
Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…
I'm excited to share my small Pillow Heart Trinket Box with you. I designed it to resembles a cozy pillow in the shape of a heart. It's perfect for storing small treasures, like jewelry, keepsakes, or any little items that deserve a…
Enjoy a sip of humor with the “Cat Drinking Coffee Keychain” – a cute, easy-to-print accessory that features an adorable cat drinking coffee from a mug. It’s a perfect gift for anyone who loves cats, coffee, or both, capturing the fun and…
Model Drinking glas coasters with holder in Voronoi Pattern. The holder can hold up to 15 coasters. Dimensions The coaster has a diameter of 99 mm and a height of 5 mm. The storage container has a diameter of 110 mm and a height of 80 mm.…
Start your day with the “Dog Drinking Coffee Keychain” – a charming and fun accessory that features a cute dog enjoying a mug of coffee. It’s a perfect companion for those who love dogs and coffee, capturing the cozy and relaxing vibe of…
NOTE: Don't use Cura Slicer for the Dino Clip, it calculates voids in the print and will cause failures. (Hat tip to Ian B. for figuring this out the hard way!) The start of this description is that I'm a confessed “Dino-Clipper”, I have…
2023 Stackable rotary drink dispenser, improved from model 2022. which takes the same geometry, but improving aspects, gained 6 mm in height to fit better in your fridge, increased 2 mm in width to reinforce the height floors.…
Printed on Creality Ender 3 V2 0.20mm NORMAL SPEED 0.4mm nozzle Fill: 5% Supports: Yes (Only for SmallRocket.stl )
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
3D Printed Vortex Sprinkler – No Moving Parts, Ready to Use This innovative sprinkler is designed for hassle-free use straight off the 3D printer. No assembly or post-processing required. With a smart, print-in-place design and zero…
Lid for your metal cans, keeps it fresh and pests can't get in to your drink. Works with 0,25 - 0,5L cans. Print it 0.2 layer height, 2-3 walls and ~40 infill. No supports required. Tried PLA and PETG - Both works like a charm. Original…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…
Took the Frog from the Flexi Frog Fidget in a Toad and hollowed it out to turn it into a fun little Frog trinket box. Made it a little stronger and improved the print quality. Printed in (3) different sizes. Great for storing or hiding…
DISCLAIMER: I designed the potions for a friend and they wanted a poison apple along side them. I did not design the apple in the pictures I took but if you wish to get the full set you can support creator JAVIBU13 at…
2024 - New geometry of the beverage dispenser, modified shape of the upper can inlet, beams and more stylized shape. Compatible with previous model 2023. https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser…
Why: When Apple launched the M1 Mac mini, it brought serious performance improvements over the outgoing generation; however, the design remained unchanged and the majority of the parts were brought over from the 2018 Mac mini. With the…
Remix of "The OG Kyle Cup - 16oz Energy Drink Can Can Holder!" by @MandicReally_151069 with the logo on both sides.
Spring is coming! So I made this delicate, floral-inspired tray to elegantly hold your cherished jewelry and small treasures. __________________ Notice: These designs are copyrighted and intended for personal use only. Commercial sales,…
Drink coasters inspired by the James Webb Space Telescope primary mirror. Fits drinks up to 3.5" diameter. Available in four surface patterns: Triangles Circles* Linear Matte Gcode and 3MF files include color change and infill patterns…
Der Nutzer “Denis Ru” hat einen weiteren hacken designt für Frame Pools von Intex. Print Settings Printer: DIY Ender 3 & Anycubic Chiron Rafts: No Supports: No Resolution: 0.20 Infill PLA: 15% Infill PETG: 100% Filament: hook - PETG drink…
This is an easily printable sprinkler system for your garden. You can snap your sprinkler on the stick and you can stick it into the soil. You can conect the sprinklers with ½" hose. Update 2021.04.02: I have added a new type of sprinkler…
This is a "Stein" sized to accept a standard 16 fl oz Monster Energy can. Included is a blank version and one with a modified Monster Logo cut into it. Neither is intended to hold liquid, simply to be a silly way to hold your Monster can.…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…
Thanks to Enigma you for her work and sharing. Following a request from Everspace I just added adjustable parts for these typical American-style cans : - 120 mm Energy Drink Can - 86 mm Regular Soda - 68 mm "Mini" Soda Thanks to Pulsar…
3D Printable sprinkler. watch the full video here:
Nothing worse than having a relaxing day at the beach (or the snowy slopes!), with a nice cold drink, and not having a good place to set down your cool refreshing beverage! So I designed and printed these Beachside Cup Holders and the…
Measuring Spoon & Funnel Set for Protein Powder & Sports Drinks. Ideal for Milkshakes & Shakes, Perfect for Kitchens & Restaurants. Print the different parts and glue the parts together with the right amount of superglue. The sliding flap…
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
Here is a set of multi-colored Harry Potter drink coasters with holder. I used these for the coasters - https://www.thingiverse.com/thing:4135988 I designed the holder with pockets in the base to accept (4) ½" x ¼" self-adhesive rubber…
Start your day off with the "Raccoon Drinking Coffee Keychain." This delightful keychain features a curious and mischievous raccoon enjoying a cup of coffee, capturing the spirit of those who love both wildlife and their daily caffeine…
Start your morning off right with this delightful “Bunny Drinking Coffee Keychain.” This adorable keychain features a cute bunny happily enjoying a mug of coffee, reminding you to take a moment to savor life's simple pleasures. It's the…
Keep your energy drinks cool and "Dragon-y"! My drink sleeves have an awesome feel and they look sweet! I recommend 3 walls and less infill for better insulation and greater strength. This version fits a tall (1pt) Monster Energy, or any…
This is a simple yard/garden water sprinkler. It has no moving parts and creates approx a 30' (10m) diameter spray of water. It is printable with no supports required. The triangular outriggers are added to allow for a "Spike" or tent-peg…
printable without supports for better quality recomended to print with 3 perimeters and layer height ≤ 0.2 mm detail profile rather than speed for speed profile use model with bigger holes, smaller holes could be filled 45° angle has…
Size: 10cm diameter x 4mm height To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D
Gotta love that Pickleball !!! 2 parts, nothing fancy. You might need a drop of glue.
Make more dimensionally accurate parts by testing and compensating for material shrinkage. If your large prints aren't quite fitting as planned, this simple test will help recify that. Inspired by the EnXlosure by Voxel3D_Nederland and…
Remix of https://www.thingiverse.com/thing:5171468 size approx 33cm x 19cm if printed at 100% it holds 0.5 liters print without supports
After using the original to hold drinks, I noticed that the joy cons had a tendency to slide out of the rails due to the weight of the beverage. So instead of trying to modify the original STL, I figured it would be easier to just model…
I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…
I made nametags for the guests of my wedding that we could hang into the drinking glasses. I used the lovely hanger made by “syca lol” and added individual names using the font “daily” by https://scratchones.com . Give this site a visit,…
This is a 100mm tool to calibrate your shrinkage with materials. It has inner-outer points to measure your shrinkage.
Fully 3D printable lawn sprinkler that propels itself with water pressure and follows a path set by the garden hose. BOM: 3D Printed parts 1.5mm wire or paper clip ¾" BSP Standard Garden Hose Adapter Print Instructions: PLA (suggest…
The design idea started with the need for a glass with a straw that my son would like. Then I wanted to increase the varieties that children would like. While I was designing varieties, I felt like I needed an iced coffee so I designed…
Ordinary drinking glass, found in so many kitchens all over the world. Category: Kitchen & Dining
printed at 0.2 layer 4 perimeters with petg for a bit of strength, now in 2 parts to make printing easier, using my p1p it fits perfectly the ¾ bsp tap fitting , used variable layer height for the top of the threads so no supports need…
This is a simple "Plume" sprinkler / myster / water blaster thingie. Gives nice coverage even at low pressure, more of a mist than droplets. Can be used as a hand watering tool too, or even as a "crazy blaster" by putting it on the end of…
