Liczymy pasujące modele…
An airgun silencer, model supplied for 22 calibre, with an expansion chamber and K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns, designed for the Crosman 2250 “Ratcatcher.” Firearms…
I've been having fun using Shred-er mags with the Vigilante, but in my shop I'm frequently hunting insects larger than flies. A little more ‘oomph’ would be fun. Current versions: The V10 barrel and V8 cylinder are quite functional, well…
This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…
This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…
Silencer for the Crosman 1077. 105db without supressor, 80,1db with supressor. Neighbourfrindly ;-) I print it with 60% infill. I print it with ABS, but i think PLA is also working. Thx to Sidenius and BlixFox! Category: Sport & Outdoors
This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included
Crosman Vigilante Pellet Clip This clip works the same as the OEM pellet clip and the bug-a-salt clip. Print Settings Printer: Bambu Labs X1C Rafts: No Supports: No Resolution: 0.2 Infill: 35 Filament: Overture PETG Black Notes: Printed…
I love Crosman 1377 / 1322 Silencer Adaptor by k19k19 , but I printed it and adjusted the design multiple times and just couldn't get a model strong enough or that would print cleanly and nicely enough. So I remade it from scratch with…
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low…
Carefully set up your printer! Because 1/2 UNF thread will be printed. My settings are: Resolution 0.15 Perimeter 4 Without any supports Included 20mm Brim on the outside only I used Prusament PLA Simply Green . You can easily use other…
A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…
Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text
Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.
I wanted a decent scope on my Crosman 2250b Ratcatcher so made this. It holds in place on with the force of the scope clamp being tightened and I've had no issue with mine for years.
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0,2mm layer hight; 0,4 nozzle Infill: 15% Filament brand: FilamentPM Filament color: black Filament material: PETG Notes: 1x: body 1x: riser 2x:…
Remixed from the two files. Took the front sight post off the original design and added it to the improved barrel band for the 1322. I do not run an optic on my 1322. I painted it white. Grab the silencer from the original 1322 Thing.…
Crosman 1077 Reloading station Fits two magazines “Clips” Storage for 1077 Clips Tool https://www.printables.com/model/527527-crosman-1077-clips-tool Dimensions: X 66mm Y 55mm Z 10mm My print settings: Layer Height: 0,2 Perimeters: 3…
Mk.3 revision posted now! Strengthening rib minimized to be easily removed if desired; removable support built into the main lug. My recommendation is to grind out a bit of the pump arm to clear the rib and keep the part stronger. The…
Cut down from the Mk.2 buttstock and given just a bit of palm swell. Will help stabilize aim with one or both hands and compliments the accompanying Pump Arm fairly well. This is an ambidextrous model, though one may forego or install the…
I designed a replacement handle for the Crosman 1322 and 1377 pellet airgun. It has a picatinny rail on the left side that supports a flashlight or laser. It's nice for larger hands and feels more sturdy than the standard handle. Note…
2/12/25 Update - Check out my new Crosman 2100B moderator mount. Print as many baffles as you want; the more baffles, the greater the sound suppression. Make sure to print one endcap. The barrel adapter is designed to be secured with a…
Print it standing up, NOT as I did in my picture, that was just me being lazy so I could post a picture of it printed. -Stupid I know ;) Hardware needed: M3X3 Set screw - 2PCS
Single side and triple picatinny mount for Crosman 1322 and 2240.
Printed with PETG with supports on the bottom. I put a ventilation slot on the bottom.
What this is: Makes crosman stock longer so you dont have to bent to it if you are a little bit larger like me. You can also make it even longer by adding spacers between stages 1 and 2. Butt stock is also adjustable in height so you can…
I let the gasket for the CO2 cartridge on my Crosman 357 pellet gun dry out to the point that it would not hold pressure when a new cartridge was punctured. I was able to remove the old gasket and take some measurements and this printed…
A modified rear sight to fit the Crosman steel breech using the factory steel sight blade insert and screw. I extended it to the rear to clear the plug on the steel breech, and made it to sit flush on top of the dove tail using a printed…
This project is a slight refinement on the Thingiverse project: https://www.thingiverse.com/thing:2881213 I designed this to have tighter tolerances, and be a little more resistant to breakage. This is a completely customizable (made in…
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
I love the original Crosman Pump Arm with Wide Grip by Gecko23 but it would not fit my Crosman 1377, I guess Crosman changed the design at some point. Maybe that applies to the 1322 as we. I made some changes to the original design to…
I liked the Moderator/Muzzle break from Dan , but the threads would snap off anytime I would pump my Crosman 2100B air rifle, so instead of just relying on the threaded part to hold a moderator on, I added a shrouded portion to snugly…
Crosman 1077 Barrel Stabilizer Fits Powermaster 66 as well Might fit other Crosman models? 1077 inner barrel outer diameter 7,93mm "5/16" 0,3125 inch Item Dimensions: X 14.1mm Y 14.1mm Z 30mm Use Silicone grease on the contact area with…
This is a stiffening liner for the current narrow Crosman 13xx/Drifter forend. It completely fills the hollow space between the forend shell, the metal lever, and the air tube. Helps eliminate that toy-like feel when pumping and holding…
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached. Well-complimented by these improved grips . Though most factory units are…
Shoulder stock for Benjamin Trail NP Mark II .177 caliber air pistol. Could not find anything serious online for this break action/nitro piston, air pistol, so I decided to create my own mod. For this mod you will need 20mm Carbon Fiber…
This is a first draft customizable picatinny rail for the Crosman P1322 pellet gun. All the parameters are customizable -- see the included OpenSCAD file. So this should be readily adaptable to any similarly configured pellet gun. The…
Crosman 1077 Clips Tool, Seating pellets flush Ejecting stuck/bad pellets Crosman 1077 Reload Tray https://www.printables.com/model/535789-crosman-1077-reload-tray My print settings: Layer Height: 0,2 Perimeters: 3 Solid Layers: 3 Infill:…
Thickened up a bit for strength and minor changes to print easier. Printed with the rail side down Sanding the bottom on a round dowel is highly recommended to get a good solid mount the lower bolt guide is removable for those without…
With interchangeable plates and grips for all your hexagon needs, this stock has a relatively tight length-of-pull and is tall enough for good scope alignment. Bed the top with some flexible adhesive or RTV to reduce vibration/noise from…
2/12/25 Update - Check out my new Crosman 2100B moderator mount. I remixed the barrel adapter and added ½"-20 threads to allow the use of any threaded moderator you might have or want to print. The barrel adapter is designed to be secured…
Picatinny rail for a vintage 1965 Crosman 760 Pumpmaster. Mounts to the barrel using the iron sight screws as well as clamping to the barrel using M3x16mm machine screws. Printed with Elegoo PLA, brim, 90% infill. Chased through holes…
Add a picatinny rail to the stock of your Crosman 1077 air rifle. This likely will only work on the synthetic (plastic) stock. Required: 3x m4 countersunk screws 3x m4 nuts Installation Instructions: Remove 3 screws from bottom of stock,…
Requires 2x or 4x M5x12 bolts and nuts. A variation of mounts included. I recommend double screw mounts, over single screw. You'll probably want to make a mirrored copy of your chosen fine in your slicer (Press M in Cura). I've provided a…
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached. Though most factory units are attached with roll pins, this model has recesses…
After pinching my palm for the last time pumping up my 1377, I went looking for an easier to grip option. I considered a wooden grip, but I wanted to keep the cost lower. At some point in my wandering I acquired a model of a Crosman Pump…
There are two files, one for the actual TPU seal and the other for converting an 11/32 ¼" hex socket into a removal tool. The printed insert is just a guide - it is very difficult to do without it. FreeCAD files are included so you can…
Fits tightly around the barrel of a Crosman 2240. Keeps it stable so you can dial in your sights.
Adaptor to fit an old style 1377 stock to new style Crosman air pistols. Was given an old 1377, the stock does not fit a new Crosman 1377, due to major design changes. Through a lot of trial and error, got a solution to fit it. Pretty…
You must add a sleeve and cap to contain the telescoped baffle core. Final baffle is tight and will need touchup with a drill, especially if used for .20 or .22 caliber pellets. This is probably best as a learning tool and experimental…
Durch diverse Umbauten war meine Endkappe etwas lädiert, auf MakerWorld fand ich eine mit Picatinny Slots aber die Stabilität war nicht sehr gut, die Schrauben hielten nicht gut im Material, so entschied ich mich 2 Phasen für M3 Muttern…
Measured up a rear sight to be able to make a custom version of it. Here is the model. Should be pretty much 1:1 with real dimensions. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.12mm…
Crosman Front Sight Remover Tool With this tool the front sight can be reused and takes no damage during the removal process. Use light taps with a hammer on this tool. Use tape to keep it in place with the sight. One hand on the Air…
The 3D preview on this site shows the negative objects as part of the model, but don’t worry — the model is designed correctly 😄 The preview here is very approximate. I also added a screenshot showing how it looks after slicing/rendering…
need to be print on the side for more solidity or it gonna brake open de side off the revolver and slide it inside with the screw already in
This is a collection of replacement rear sight blades for the Crosman 13XX/22XX series of airguns. They directly replace part OS244. These are designed to fit very snugly into AlanMoulding's Steel Breech Rear Sight. Depending on the…
Had lost / broken the little loader door on my Crosman 760 some time ago. Decided to make my own and it worked really well so figured I'd upload in case anyone else was in need. I printed mine on 0.15mm Quality and used full supports and…
Covers that flat spot left when the rear sight is removed to install a scope or other optics. Options are for a pan head or flat head screw. A shorter screw will be needed, 8/32 x ¾" Also included with the barrel adapters for my…
Crosse Crosman Benjamin ARMADA
Front sight for the Crosman C1K77
Da ich meine Crosman 1377, mal mit nem RedDot und mal mit nem ZF schieße, habe ich mir eine Picatinny Schiene auf voller Länge konstruiert. Da meine 1377 einen Schalldämpfer Adapter hat, weiß ich nicht ob die Schiene auf bei Waffen ohne…
Moderator and shroud spacer for your crosman crusher .22 use 50% infill and I would use at minimum PLA+, results will very. You don't want to grab this while cocking your rifle, was not designed to handle this type of force and will…
When I first got my 1322 I loved it, but as a leftie the safety wasnt very comfortable. I looked to buy a replacement but its $25-30 for one from china, so instead I made one myself. Ive been using it for months now with zero issues, just…
I decided to use a Crosman Voodoo shotgun for indoor airsoft, but I wanted a tracer unit to attach. I therefore made this adapter that push fits over the orange end cap, inside the outer barrel and over the inner barrel. The fitment is…
J'ai dessiné et imprimé cette pièce qui aide à l'alimentation du chargeur du Crosman A4-P en utilisant un speedloader. Imprimé en PETG, couche 0,2.
J'ai dessiné et imprimé ce modèle pour pouvoir exposé le Crosman A4-P. Imprimé en PETG, couche 0,2. 16 inserts M3 et 16 vis M3x30.
Da mir meine Enkappe verloren gegangen ist, hier ein Ersatzteil was einen TOP JOB macht ;) Es können 2 M3 Muttern eingeklebt werden und demnach kann man auch 2 M3 Schrauben fürs System verwenden. Ich weiß nicht warum Printables die…
I bought a few spring powered BB pistols back in the day, with this Crosman PSM45 easily being my favorite. Great for backyard plinking without expense or having to worry about hurting anyone. After a while, the feeding became unreliable,…
Front sight and barrel adapter for Crosman Cowboy BB gun.
i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed
Crosman 3100 Air Rifle Front Sight. Very Easy, Simple Print
i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed
Durch diverse Umbauten war meine Endkappe etwas lädiert, auf MakerWorld fand ich eine mit Picatinny Slots aber die Stabilität war nicht sehr gut, die Schrauben hielten nicht gut im Material, so entschied ich mich 2 Phasen für M3 Muttern…
Da mir meine Enkappe verloren gegangen ist, hier ein Ersatzteil was einen TOP JOB macht ;) Es können 2 M3 Muttern eingeklebt werden und demnach kann man auch 2 M3 Schrauben fürs System verwenden. Ich weiß nicht warum Printables die…
Da ich meine Crosman 1377, mal mit nem RedDot und mal mit nem ZF schieße, habe ich mir eine Picatinny Schiene auf voller Länge konstruiert. Da meine 1377 einen Schalldämpfer Adapter hat, weiß ich nicht ob die Schiene auf bei Waffen ohne…
Required Hardware (2) 6-32 x 1/2" Screws, (2) 6-32 Nuts (1) 8-32 x 2" Screw, (1) 8-32 Lock Nut, (2) 8-32 Flat Washer
