Liczymy pasujące modele…
This is Fanart, so please don´t use this for commercial printing! I sculpted her in Zbrush and the STL´s are orientated as i printed them. You will need supports on all parts, except the base. You´ll see that some parts have Errors in the…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
Does not require support material Print with back face (power cord plugin area) on the print bed
He's soooooooo cute, look at him flop around. (Hat not included)
Scarlet Spider-Man Inspired face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy (5/30/21) There was a issue with scaling on the X axis with a few of the face shells, This is fixed now.…
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
The New Year Glasses — Scarlet Black edition — capture the festive spirit of 2026 with bold contrast and sleek design. Crafted from durable matte black material with raised red numerals, these celebratory glasses combine modern minimalism…
All parts come oriented in the optimal position for printing, and are sized to fit on an Ender 3 or Prusa Mk3. Overall, I would recommend printing with minimal infill and a decent amount of perimeters to maintain as much strength as you…
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
This is a set of pieces that can be used to recreate the Scarlet Spider figure originally published as part of set 76057 at 500% scale. This is a rare minifig that's only appeared in this one set. All the stl files needed to make this can…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
Part of my Marvel's Avengers Coaster collection where other Avenger coasters can be found. Also print the Avengers Coaster Holder to keep all your Marvel Coasters in! Designed these using Fusion 360 after my favourite comic book, movie,…
Design Concept The Scarlet model embodies elegance combined with a hint of mystery. Her flowing attire and subtle pose enhance the character's captivating aura, perfect for those seeking a distinguished piece for their collection. Purpose…
Straight out of the rainforest and onto your desk. 🦜🌿 The Scarlet Macaw is one of nature’s most spectacular birds, bold, brilliant, and impossible to ignore. Now it’s fully articulated and fits right in your pocket. Every joint flexes…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
A vertical stand with a perfect fit for the Focusrite Scarlett Solo. Free some space on your desk !
I previously had a Scarlett 2i2 Gen 2 mounted under my desk with the mount from ziller88 . After the Interface died i bought a 2i2 Gen4 and modified the mount to work with the new interface. It comes in 4 Versions: Scarlett 2i2 Gen4 desk…
Under desk mount for the Focusrite Scarlett Solo 4th Gen. (note: 3rd gen and 4th gen are different sizes, 4th gen is bigger so this will not fit the 3rd gen) Designed to not require supports, to allow this it should be printed on one of…
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
Scarlet Spider-Man-Kaine Parker Inspired Face Shell Enjoy Category: 3D Printing
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
Holder for mounting your Focusrite Scarlett Solo 3 under the Desk. The Solo 3 can be inserted after mounting the holders under the desk. Dimensions: Height: 45,5 mm Width: 24 mm Length: 57 mm Hole diameter: 3 mm Print instructions Layer…
The Focusrite Scarlett Solo/2i2 4th Generation seem to have no way to disable or dim their status LEDs. If the unit is in a bedroom and the computer is never shutdown, this presents a problem. This is just a basic cover to snap on when…
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
This bracket has mounting holes compatible with the Balolo mounting grid, but of course you can also screw it to the underside of a desk. Easy to print, PLA is fine, no supports required.
https://www.hi3d.ai/share/photorealistic-bikini-woman-3d-collectible-figurine--4845b2a652a54d3495b242b124d28e08?inviteCode=Y8Axoeva9P&shareType=history_model
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
Focusrite Scarlett 2i2 - Vertical Stand.
Full disclosure: this thing sucks. I put it here cause it's free and hey, maybe someone has use for it or can fix it. I modeled this with the intent of being used for an Erza Scarlet cosplay. It was my first attempt to make something that…
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
This is one of many model's/statues i have created in blender for a project i am working on. Uploaded here because i don't think it will be using this one in my project and someone might get some use out of it. Although i did not 3D print…
This mounts a Focus Scarlett 2i2 audio interface (3rd generation) under a desk or table. It includes a large hook for headphones below. There is a smaller hook in back for extra loops of headphone cable. I modeled this in Fusion360. Along…
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
Chaos Magic Reality Warping - Wanda's unique mutant ability allows her to harness and manipulate the force of probabilit
the Scarlett Solo table attachment 3D print fits perfectly under any table, whether screwed or glued in my case(acrylic)
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
This is a Focusrite Scarlett 2i2 Mount for the Balolo setup cockpit
See “Differences” below for more information
I believe this is the Myoho Muramasa from Scarlet Nexus. I used the cosplay guide for references. Should be full scaled. Base is 1 solid piece, The two other files are for those who want to slot in the blade. I am "pretty" sure itll fit…
Mount for Focusrite Scarlett 2i2
A under desk mount for a Scarlett Solo. Includes ports on the back for the USB c and the ¼in Ports.
Under desk mount for Scarlett 4i4. As drawn, it fits, albeit very snug. If you want a little wiggle room, might want to scale it up a bit. I used #8 flat top screws. (U.S.) The screws countersink perfectly to clear the housing of the…
¡Trae la magia del caos a tu colección con este espectacular modelo 3D de **Scarlet Witch (Bruja Escarlata)**! Este elegante diseño captura el poder de uno de los personajes más icónicos del multiverso. Perfecto para los verdaderos fans y…
I made these for my own Erza Scarlet cosplay and they work really well. The “gem” part is 3 cm long and the loop is able to fit a jewelry jump ring.
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
Gone with the Wind - Scarlett O'Hara (Vivien Leigh) - 1939 3D printable model.
My knobs became sticky as the plasitic started to break down. So I made a replacement for them. This is a replica Knob for Focusrite Scarlett 2i4 (First Gen). Might fit other Focusrite Hardware aswell. Feel free to leave a comment, if it…
There is no shortage of Images of Scarlett Johansson portraying Black Widow in Iron Man 2. Here are three I found and mad into Lithophane STL files. Again the are images were found on the web, Links provided. Black Widow-Scarlett…
Iconic Movie Moments - Gone with the Wind - Frankly Scarlett, I Don't Give A Damn - 1939 3D printable model.
The Focusrite Scarlett 2i2 4th Gen is a lovely USB audio interface with an iconic look! However, the red metallic chassis doesn't fit in with every aesthetic around it. In my case, I was building a digital piano setup, and the original…
the beasts deserve to be called the Mesozoic trio because scarlet is prehistoric all the time but please not if your having trouble printing them try blue ductape to help them stick my friends
Mounting Bracket for Scarlett solo 3rd gen with the microphone cable holder.
Remix of the original model to support the different size and foot/input locations on the Gen 4 Scarlett Solo
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
This is a replica of the Scarlett Solo red metal casing. It can be printed in whatever color or material you like. Replacing the case: Removing the original red case is not hard at all, just peel back the two lower pads on the bottom,…
Print Settings: Material: HSM PETG Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The…
A minimal angled desk stand for the Focusrite Scarlet 4i4 so the knobs are a little more accessible and visible. 15cm wide by 10cm deep Can be used for other Focusrite devices as well. Feedback is welcome! Updated Version 2 Uses far less…
Focusrite Scarlett Solo 3rd Gen cover for those who hate red color=)
The Scarlet Sentinels
Pretty shelf for the 2i2! Two STL files available, one also has the top side indent that I use for my Minimixer, as seen in the picture. The other one has a smooth top. Edit: After a while I realized it's actually perfect for holding it…
Rack Ears for Focusrite Scarlett 18i20 4th Gen
Template to help with mounting Focusrite Scarlett 2i4 2nd Gen bracket
Friction fit 10 inch rack mount for Focusrite Scarlett 8i6
print two times on the flat side Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: Prusament PETG Category: Audio
I made this to install it under my desk. 0.2mm tolerance on every side, works great. 3mm diameter countersink holes, I used 4mm screws
A simple, low-cost, easy-to-print, Scarlett 2i2 Gen 4 Under Desk Mount that uses 3M Command Large Picture Hanging Strips Print Settings Choose your preferred model: Raised or Flat. Use Raised if your table has a 20 mm thick metal bar like…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
La caja está diseñada para transportar la tarjeta de sonido Focusrite Scarlett 2i2, pero también es válida para la Scarlett solo, dentro cabe la tarjeta con su soporte y bolsa de tela. Está diseñada para poner la tarjeta en la parte…
Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament material: PLA Notes: Printed horizontally with supports
I recommend printing this mount on its rear face, with the release tab facing upwards and some tree supports for the tab, as shown in the model photos. The mounting holes are sized for #6 screws.
No supports needed, printed in Pla with ender 3 printer.
Printed in PLA Advise to use a brim
A vertical stand I made for my gen 4 Scarlett 2i2! Made to be stable while visually unobtrusive. :) Doesn't cover the XLR or USB ports on the back regardless of its orientation. You can add rubber feet under the base if you want to get…
Remixed this Focusrite Scarlett 2i2 under desk mount so that it uses Multiconnect slots to mount instead of the screw holes. Printed with the same orientation as the original, and no supports needed. I printed this in PETG, which has…
Soporte para tarjeta de sonido Focusrite Scarlett 2i2
Added a void in the bottom for the feet to “rest” so they do not have to be removed, i wanted to keep mine stock in case i ever wanted to desk mount it again. The feet could vary slightly in its locations hence i made a big void instead…
Top and bottom mount for Focusrite Scarlett Solo Gen 3.
Print settings Material: PLA Supports: organic/tree (refer to screenshot)
The push button of my Focusrite Scarlett 18i20 MKI broke of. Only replacement parts for MKII were available so I created an MKI version. Not extremely elegant, but it works. Possible enhancements in the future: little more rounded top and…
this design :https://www.thingiverse.com/thing:4870981 modified to my needs
I saw the thingyfab stand on thomann and I tried to remake it
Desktop stand - 30-degree tilted version for Focusrite Scarlett Solo 3rd Gen. Second, Smaller version: https://www.printables.com/model/1794623-focusrite-scarlett-solo-3rd-gen-hellraiser-v2 Cutouts: For 2 large jacks and thick cables For…
Simple veritcal mount for Focusrite Scarlet solo 4th gen. sound card.
Recently got into collecting Pokemon TCG and noticed there weren't dividers with labels on them. Here you can find a divider with each set abbreviations currently available in the Scarlet & Violet expansion. Primary for those who organize…
There are slots for rubber strips on the bottom piece to prevent slipping.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Scarlett is annoying. She's too precious for peg holes in her feet so she doesn't fit most Joe stands. Well take this!
