P
PrintablesactualSIZE
Uchiha Sharingan Magnets
A few of the eye designs found in the Naruto series. Print instructions Switch from red to black at 1.7mm. Glue a small 7mm magnet on the back side to complete.
- Pobrania
- 406
- Polubienia
- 36
- Ocena
- 5
Wyniki wyszukiwania: sharing
Liczymy pasujące modele…
P
Printablesdantech
Smartphone stand holder with Kakashi Mangekyō Sharingan
Smartphone stand holder with Kakashi Hatake Mangekyō Sharingan Category: Gadgets
- Pobrania
- 396
- Polubienia
- 37
- Ocena
- 5
P
PrintablesChitranshu Nagora
Mangekyō Sharingan Eyes (Naruto) Keychain Set
Mangekyō Sharingan Eyes Keychain Set There are a total of 18 keychains in the set. Each keychain measures 40mm by 40mm , but you can scale them to any size or make them thicker if you'd like. This file is designed to be printed with an…
- Pobrania
- 285
- Polubienia
- 38
- Ocena
- 0
P
Printablesdantech
Earring Pendant Kakashi Sharingan
Earring Pendant Mangekyou Sharingan Kakashi Hatake Category: Fashion
- Pobrania
- 274
- Polubienia
- 32
- Ocena
- 5
P
Printablesskino
Dog Tick Remover Sharing Card
Where I live Dog ticks are all around. I have 3 mountains around where I live as well as plenty of grassland… My Labrador Milo absolutely loves to bounce around in tall grass and bushes and has had a few ticks the last time he got one I…
- Pobrania
- 226
- Polubienia
- 48
- Ocena
- 5
P
PrintablesPandamerican
Kakashi Sharingan Keychain / Llavero Sharingan Kakashi
Tamaño perfecto para llavero, no es aparatoso. Las partes están bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
- Pobrania
- 215
- Polubienia
- 30
- Ocena
- 5
P
PrintablesCeji3D
MMU Sharingan extruder visualizer
Just a mangekyo sharingan for the extruder visualizer.
- Pobrania
- 203
- Polubienia
- 18
- Ocena
- 5
P
PrintablesPandamerican
Madara Mangekyo Sharingan and Eternal Mangekyo Keychain / LLavero Mangekyo sharingan y eterno de Madara
Tamaño perfecto para llavero, no es aparatoso. Las partes estan bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
- Pobrania
- 198
- Polubienia
- 37
- Ocena
- 0
P
PrintablesPandamerican
Itachi Sharingan keychain / Llavero Sharingan Itachi
Tamaño perfecto para llavero, no es aparatoso. Las partes estan bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
- Pobrania
- 185
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAmit
Itachi Sharingan keychain
hey! i made this Itachi sharingan key chain, it uses multicolor filament change . Print this model twice and then glue the parts together for the best result! i printed this on ender 3 with 0.2 mm layer height and standard 0.4 mm nozzle.…
- Pobrania
- 167
- Polubienia
- 17
- Ocena
- 0
P
PrintablesAmit
Kakashi Sharingan keychain
hey! i made this Kakashi sharingan key chain, it uses multicolor filament change . Print this model twice and then glue the parts together for the best result! i printed this on ender 3 with 0.2 mm layer height and standard 0.4 mm nozzle.…
- Pobrania
- 160
- Polubienia
- 23
- Ocena
- 0
P
Printablesdantech
Mangekyou Sharingan Sasuke (Eternal) keychain
Mangekyou Sharingan Sasuke (Eternal) keychain Category: Keychains
- Pobrania
- 159
- Polubienia
- 12
- Ocena
- 0
P
Printables3D Gene Designs
Sharingan eyes - Magnets/coasters
Set of 5 different Sharingan eyes in the form of “magnets”. These are made for a multicolored machine. I went with the 5 I thought were the most common or recognizable. If you wish to see a specific one, let me know! I reused this design…
- Pobrania
- 142
- Polubienia
- 16
- Ocena
- 0
P
PrintablesPRINTSY
Sharingan Knob
Sharingan Knob Sharingan design for the LCD knob competition. Planning to add other variants of sharingan too. You can change the filament color by using the ‘Filament change’ or ‘Pause at height’ in Post processing plugin. Please share…
- Pobrania
- 132
- Polubienia
- 20
- Ocena
- 0
P
Printablesdantech
Earring Pendant Itachi Uchiha Sharingan
Earring Pendant Itachi Uchiha Mangekyou Sharingan Category: Fashion
- Pobrania
- 131
- Polubienia
- 20
- Ocena
- 5
P
PrintablesJacallan12
Sharingan Keychain
I made this keychain a little thicker then normal keychain so it would not break but I realize for the average Joe you would use standard DIY keychain if your making them. Therefore i recommend you you bring the model down in the slicer…
- Pobrania
- 121
- Polubienia
- 10
- Ocena
- 5
P
PrintablesAERO3D
Itachi Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 115
- Polubienia
- 11
- Ocena
- 5
P
PrintablesAERO3D
Kakashi-Obito Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 110
- Polubienia
- 9
- Ocena
- 0
P
Printableszephyr1125
A1 Mini Motor Visualizer Sharingan
A sharingan motor visualizer for A1 mini. Easy to install. I printed it with two colors, also provided the whole model for manual color change. I will keep updating. What new theme you wish next? Please tell me! Install:…
- Pobrania
- 107
- Polubienia
- 35
- Ocena
- 0
P
PrintablesKillerKreationz
3 Tomoe Sharingan Keychain
Quick and easy keychain. Best to use your slicer to stop at the layer the actual sharingan starts and swap from red to black filament.
- Pobrania
- 106
- Polubienia
- 15
- Ocena
- 0
P
Printablestelepath
Sharingan Keychain
🔴 NEW 🔴 Now the keychains can be printed upside down! - Open them in Orca Slicer, set filament change for the black part, then print them! ONLY 2 FILAMENT CHANGES NO MMU/AMS REQUIRED Layer height: 0.3 Perimeters: 1 Top and bottom shells: 3
- Pobrania
- 101
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAx
Sharingan wheel rim
Check out this awesome wheel rim i´ve designed for my brothers RC-car. With this Sharingan optic from Naruto the car will look insane. enjoy and share:) A picture of the print will follow soon. Check out my Designs on Pinshape.com…
- Pobrania
- 96
- Polubienia
- 17
- Ocena
- 0
P
PrintablesTomek
Lightweight Spool for samples and sharing
About the spool: lightweight modular filament spool ( <50g ) The spool is as strong and lightweight as you want (just change infill or perimeters) vase mode core (various heights), can handle up to 250g of filament, with tag to indicate…
- Pobrania
- 95
- Polubienia
- 52
- Ocena
- 5
P
Printables7Twixie
Ender 3 V3 SE Mangekyou Sharingan Extruder Visualizer
It's a very simple two part construction that you press fit together. It was made that way in order to print the base red and the pattern black. I might add more patterns in the future. The Whole thing has a diameter of 3 cm and the…
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 5
P
PrintablesEthanCan'tPrint
Itachi's Mangekyou sharingan throwing star
Print Settings: Infill: (whatever you choose it doesn't matter) Adhesion is recommended but not needed
- Pobrania
- 76
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMoro
Bambu A1 Mini Sharingan Extruder Visualizers
I wanted Sharingans in my bambu a1 mini so i made these. Feel free to remix them into other patterns. Printed on a 0.4 nozzle. Will probably look better on a 0.2.
- Pobrania
- 67
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDammDaniel
Naruto Sharingan Keyring
1.Print the main.3mf file in black 2.Print the second.3mf file following the instructions: Has two colors, back color (red)and front color (black) First print with red filament then before layer 8 starts (at 0.2mm layers) you change to…
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAERO3D
Sasuke Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 62
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSocrate0801
Sharingan 45 adapter
je ne connais pas trop les dimension pour un 45tours mais cela devrait faire plaisir au fan de NARUTO comme moi.
- Pobrania
- 59
- Polubienia
- 11
- Ocena
- 5
P
PrintablesIbie
Sharingan phone stand
Remixed model of Kakashi mangekyou sharingan phone stand. Added a background. I printed flat as shown in the second image, with no supports. I did end up with 3 small layers with saggy overhangs, but not enough for me to worry about for…
- Pobrania
- 58
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAERO3D
Sasuke Eternal Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPista_prints
Sharingan logo
Suggested printing settings: Infill: 100% Layer height: 0.2mm If you like it, give me a thumbs up. :) Thank you!
- Pobrania
- 56
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDrg Designs
Naruto Shippuden Sharingan Keychains Collection
Design Concept The keychain is inspired by the iconic Sharingan from Naruto Shippuden. It's designed to be stylish while expressing fandom appreciation. Purpose Ideal for fans of the series, it serves as a decorative keychain that can…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAERO3D
Shisui Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAERO3D
Rinne Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesUnholyorders82
Sharingan Eyeball
Ams required for color. Eyeball is modeled at 1.5 inch diameter. Scale to your needs. .16mm supports 2 walls 15% infill
- Pobrania
- 50
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSlotracer
Latch for Sharing Library or Cabinet
I refurbished the book sharing library outside our local public library. I replaced the simple pivoting wood block latch with a printed latch which is a little more positive. The pivoting portion is countersunk for an average deck screw.…
- Pobrania
- 48
- Polubienia
- 16
- Ocena
- 0
P
PrintablesAERO3D
Madara Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPista_prints
Sharingan logo
Suggested printing settings: Infill: 100% Layer height: 0.2mm If you like it, give me a thumbs up. :) Thank you!
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJavier T
Knob's Sharingan
Simple drawer knob with the some sharingan, for M4 threaded insert.
- Pobrania
- 42
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAERO3D
Madara Eternal Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSomeRandomGuy000
Ender 3 V3 SE Sharingan Extruder Visualizer
An extruder visualiser for the Ender 3 V3 SE.
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMateus Felicio
Sharingan
Chaveiro sharingan Para imprimir alguns passos importantes 1° No fatiador Prusa slicer vá nas configurações da impressora 2° Em Geral, coloque o número da extrusora em 3, 3° Depois vá nas extrusoras que aparecem em baixo e definidas como…
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 0
P
Printablesdantech
Filament guide Sharingan
Filament guide v2 Another version of filament guide with 6mm airsoft ball bearing. Added new guide in the form of hypnotic sharingan. Category: 3D Printing
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesLordTalon34
sharing pizza or cake slices
sharing pizza or cake slices
- Pobrania
- 35
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAquilezStudio
Sharingan Keychain / llavero
se uso una boquilla de 0.4 altura de capa 0.20 mm
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAERO3D
Madara Eternal Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDalawa
Sharingan DJ Knobs
This is my entry for the Hercules: Custom DJ Knobs. I was inspired by the Sharingan from Naruto and thought they would look cool as knobs. I printed this on the Creality CR-10, and added in the multicolor aspect through PrusaSlicer. The…
- Pobrania
- 28
- Polubienia
- 18
- Ocena
- 0
P
PrintablesNuh Shaheer
Sharingan Maker Coin
Just my cool maker coin. Print normally. you can use supports if you want, but I don't think it is needed. Took around 1h and 15 min at 20% infill for my Ender 3 at 100% speed.
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesElement Runner
Kakashi Mangekyou Sharingan Eye Wall Art
Simple to print wall art of Kakashi's Mangekyou version of the Sharingan from Naruto. Example photo printed at 0.20 layer height and 10% infill.
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAERO3D
Sharingan Two Tomoe Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLettuce Prints
Kakashi's Sharingan Fidget Spinner
Kakashi's Sharingan Fidget Spinner needs standard 608 bearing and 2 caps printed.
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBirnen Bountz
Sharingan Keksausstecher
Keksausstecher Sharingan, Viel Spaß damit :)
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDaniel Pádivý
sharingan octopus
chbotnice která probuddila sharingan
- Pobrania
- 25
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGwebster
Mount for SGEYR USB 3.0 Switch 2 In 4 Out USB Sharing Switcher USB 3.0 KVM
Hello there, Just a Simple Mount for this specific USB-Hub / Adapter /KVM ( SGEYR ) can't say if it fits other adapter as well, but I added a picture with dimensions You can use a program like MeshLab to make additional measurements have…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printablesthanhhao1604
sharingan-ender3v3se
Need glue, red pen and black pen
- Pobrania
- 23
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAERO3D
Izuna Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAERO3D
Shin Mangekyo Sharingan Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purpose
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAERO3D
Sharingan One Tomoe Coaster
Remember that all of the designs have been created to be 3D printed and sold in your stores or used for personal purposes. So, you can use the designs for anything you need after purchasing them.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMr. Dizze
5015 Fan Blower center Cover Naruto Sharingan
Made some easy center fan cover for my 5015 blower with sharingan evolution steps Just print it and glue or use a small piece of adhesive tape to fit them in place
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNoel Cerón Herrera
Mangekyō Sharingan de Kakashi
Calidad : Altura de capa de 0.2 mm. Relleno : Densidad de relleno variable, de 40% a 60%. Material : Utilizar PLA. Velocidad : Impresión a velocidad ajustable, de 30 mm/s a 50 mm/s. Soportes : No son necesarios.
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesA.F_3D Print
Capswap Corsair H150i RGB PRO XT– AsusRog - Prusa - Berserk - Sharingan
📝 Description: These 3D‑printed pump caps were designed entirely from scratch 🛠 for my Corsair H150i RGB PRO XT 💧 — a model not officially supported by the “Corsair Components: Make It Yours” contest. ⚠ I’m fully aware that this model…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLettuce Prints
Itachi's Sharingan Spinner
Itachi's Mangekyo Sharingan Fidget Spinner uses standard 608 bearings. 2 Caps are needed.
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJelly
Sherpa Micro Obito Sharingan Knob Cover
You'll want to scale up 1-2% otherwise its a REALLY tight fit. This covers the screw so you want to be able to get it off at some point. Used Uchiha Sharingan Magnets for the obito sharingan. Thanks!
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJ.V.H.
Desk Sharing Organizer Inserts for Haworth Caddies
The standard Haworth desk sharing caddy is great, but its large compartments aren't ideal for storing smaller, loose items. To make better use of the available space, I designed this modular FlexBox insert system . You can mix and match…
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
Printableshamgolfer
Case for GNSS (GPS) Splitter/Sharing Device
This is a 2 port antenna splitter with DC transfer for sharing GNSS/GPS antennas. It is built around Sparkfun SPX-21223 and three N Female Panel to SMA Male adapters. Links below: GNSS Antenna Splitter (Power Divider) with DC Pass -…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJakob Braun
Crumbl Cookie Sharing Cutter
Print as separate pieces and slide fist onto cutter as handle if desired
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLettuce Prints
Shisui Sharingan Fidget Spinner
Shisui Sharingan Fidget Spinner needs standard 608 bearing and 2 caps.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFujin Raijin
sharingan01 Lithophane
Customized version of https://www.thingiverse.com/thing:229961 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=229961 Instructions Using the following options: height = 2 size = 81 layer_height = 0.01…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesANIMEMES_PRINTS_R-US
SHARINGAN EYE KEY-CHAIN
Keychain to give you the power of the second form sharingan! while you are at school and taking a test just look at a smart kids arm movements and copy it while using the sharingan keychain! Original keychain design by a close friend:…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNoel Cerón Herrera
Mangekyō Sharingan Eterno de Sasuke
Calidad: Altura de capa de 0.32 mm. Relleno: Densidad de relleno ajustable, de 20% a 40%. Material: Utilizar PLA. Velocidad: Impresión a velocidad variable, de 40 mm/s a 60 mm/s. Soportes: No son necesarios.
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFujin Raijin
sharingan03 Lithophane
Customized version of https://www.thingiverse.com/thing:229961 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=229961 Instructions Using the following options: height = 2 size = 81 layer_height = 0.01…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHjorth
Mount for LINDY USB 2.0 4 Port Sharing Hub (42887)
For my use I printed it in 0.2 speed on my MK4 with PETG. Holes are 3mm with a 5mm space sunk flat 3,5mm down. Debt of block is 17,2mm from grooved slices to back of block.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMDZ_3D
Hand Fan - Naruto Theme (Sasuke's Eternal Mangekyou Sharingan)
Hello Everyone, This is a custom fan design that incorporates Sasuke's Eternal Mangekyou Sharingan design. The fan is 8.0" in diameter plus another 1.0" for the handle. This is fan is a fun print for the summer but can also double up as a…
- Pobrania
- 9
- Polubienia
- 5
- Ocena
- 0
P
PrintablesANIMEMES_PRINTS_R-US
SHARINGAN BALL
GUYYYYYYYYYYYYYYYYYYYYS IT WORKS! REALLY! I TRIED IT ON MY SISTER!
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFabiian
Universal UGREEN USB Sharing Switch - ESPHome Smart Controller
This is a remix of the Wifi Control Mod for UGREEN Switching USB Hub by @kn100 . While the original project was designed for the USB 3.0 version, I have successfully tested it with the USB 2.0 variant, so it seems that the PCB dimensions…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCarlThePumpkinMan
Sharingan Capsule (Suspended String Art)
Intro I’ve seen a bunch of suspended string models through the years, and I wanted to try and take a crack at them myself. If you’re not familiar, these types of models take advantage of the extruder on FDM printers to bridge the gap…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDiablo
Without likes? Creators lose interest and stop sharing their work.
To you? A ‘like’ may not feel as though it makes much of a difference. To a creator it's a thanks for making the thing and taking the time to share it. Regardless of who created an stl or set, wherever you download from, if it was worth…
- Pobrania
- 7
- Polubienia
- 24
- Ocena
- 0
P
PrintablesLpimp3D
Naruto Sharingan 1 Aspas
Llavero del anime Naruto Sharingan 1 aspas Espero que les guste! Si lo imprimen estaría bueno que muestren como les quedo el suyo Agradecería que le den me gusta y me sigan para seguir subiendo diseños gratis.
- Pobrania
- 7
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSAR Rasheed
Sharingan Passthrough Corsair Cooler Cap For Titan Cooler
This is a Naruto Inspired Titan cooler cap featuring two sharingan. To be printed using dual colors. Optimized for the “paint” option in the bambu slicer
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFujin Raijin
sharingan Lithophane
Customized version of https://www.thingiverse.com/thing:229961 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=229961 Instructions Using the following options: height = 2 size = 81 layer_height = 0.01…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHoward Chan
3 Tomoe Sharingan - MK3S Extruder Visualizer
Needs a magnet up to 8mm glued on
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTwixer 22
Lampara de sombra sharingan de Sasuke
Descripción Lleva el poder del dojutsu más icónico del clan Uchiha a tu pared con esta lámpara de sombras inspirada en el Mangekyou Sharingan de Sasuke. Este modelo ha sido diseñado desde cero bajo un concepto 100% mecánico y funcional…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTarzan7749
TTRPG Remote Map Sharing Device Holder
Print without supports, 0.4mm nozzle. Designed for PLA and flexibility, but PETG would likely work well too. Attach pieces with your choice of machine screws and bolts. Designed in tinkercad, works with apple phones. I know a flex arm is…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSteinamyte
A way to secure your shades from the wind (idea sharing)
I needed a way to lock the shades better to the frame. Before, already low wind lifted the shades, moved them and it was always a hassle to put them back in place. The sizes may not match your diameters and requirements but maybe you can…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTimothy Abraham
Samsung S20+ to Gear S3 Wireless Power Sharing Fixture
This alignment fixture is a quick, easy print that keeps your watch locked onto the "sweet spot" so it doesn't slide off your phone while you're topping off your battery. Tested with my own gear S3 frontier and S20+ with the case removed.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables3D Rex
Hueforge Lesezeichen Kakashis Sharingan
Hai :) Das Lesezeichen ist ein Wunsch meiner Tochter gewesen :) Es zeigt das Mangekyō Sharingan von Kakashi Hatake aus Naruto Shippuden. Das Lesezeichen wird mit einem Firstlayer von 0,16mm und einer Schichthöhe von 0,08mm gedruckt. Der…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLibary
Sharingan Spoolholder Caps
Easy to print little accessories for the new Prusa spoolholder. Needs only 2 colorswaps. Printing: 0.2mm or lower, no supports needed. Printed upright add colorswaps at layers #51 and #53 Printed downwards add colorswaps at layers #4 and #6
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSchmit3D
Father and Son Sharing Love
Celebrate the special bond between a father and child with this touching, detailed 3D model. Featuring a father kneeling down to hand a small heart to his looking-up son on a textured circular base, this sculpture makes a wonderful…
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
P
Printables
Hand Fan - Naruto Theme (Sasuke's Eternal Mangekyou Sharingan)
Hello Everyone, This is a custom fan design that incorporates Sasuke's Eternal Mangekyou Sharingan design. The fan is 8.0" in diameter plus another 1.0" for the handle. This is fan is a fun print for the summer but can also double up as a…
P
Printables
Ender 3 V3 SE Mangekyou Sharingan Extruder Visualizer
It's a very simple two part construction that you press fit together. It was made that way in order to print the base red and the pattern black. I might add more patterns in the future. The Whole thing has a diameter of 3 cm and the…
P
Printables
Itachi Sharingan keychain / Llavero Sharingan Itachi
Tamaño perfecto para llavero, no es aparatoso. Las partes estan bien diferenciadas para elegir bien los colores. Modelo impreso con PLA 870 negro y PLA 850 Rojo para mayor resistencia. Perfect size for a keychain, it is not bulky. The…
P
Printables
Posavasos de los Sharingan de Naruto | 10 unidades
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
P
Printables
Desk Sharing Organizer Inserts for Haworth Caddies
The standard Haworth desk sharing caddy is great, but its large compartments aren't ideal for storing smaller, loose items. To make better use of the available space, I designed this modular FlexBox insert system . You can mix and match…