675 modeli
This is a very simple mini trashcan for the workshop. Its diameter is 11 cm and the height is 15 cm. To speed up the print and make it as simple as possible, it is a vase mode print.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
You really only need 2 of them per can. To lock in place insert sideways and rotate 90 degrees.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have made 2 versions, one is to put on the table, and the other is like the originals to hang on poles or stands. For the hanging version I recommend cable ties or cords to fix. As a reference I 3D scanned a Trashcan you can see it…
Wydruk około 11,47 €–14,02 € nettoWstępna wycena jednego wariantu
I was tiered of my towels falling off the rack and onto the floor or getting holes from common metal holders/clips. This is my simple solution to the problem... - three sizes to match most racks. Have been using them for years now and…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
A simple cash register in the shape of a garbage can. I used a standard 0.20 speed profile for printing On Top i use supports For a nicer look, I screwed the side brackets and the bracket on the lid with M3x5 screws The lid is screwed…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
This Desk-Trashcan is modelled after the Public Trashcans of Vienna. It is in the Scale of 1:5. I used this as a reference: https://poly.cam/capture/fb7abc53-ec15-42eb-831a-91294c7b7ab8 For the Version with the hinge, just align both…
Wydruk około 13,06 €–15,96 € nettoWstępna wycena jednego wariantu
Box for used batteries 9V battery style Dimensions : 91x60mm, height 160mm Need 4 magnets diam.4 x 2mm Case: Layer height 0.2mm Infill 15% Model color Black then Copper Color change at 105mm Pause at 151.6mm to place the 2 magnets (4x2mm)…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Diese Halterung ist für das Spültuch Jemako designt damit dieses nach Gebrauch abtropfen kann und dadurch hygienisch trocknet. Es kann völlig ohne Support gedruckt werden, vorzüglich in PETG This holder is designed for the Jemako…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in ASA so it doesn't warp, upright print no supports needed
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
I keep a trashcan in my car door and i find that the lid pops off easily, so this small clip came along. This fits the Kolorae Cub holder waste can and similar variance.…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
What to say about it, is a trash can for the table that looks like a garbage can. I have removed the garbage can lettering from the model Printed with PETG Without support Layer height 0.2mm …………………………………………………. Was soll man dazu sagen,…
Mini Trashcan Keychain Little trashcan that can be used for storage, decoration, or as a keychain. Maybe handy to hang on your backpack or purse. The lid is threaded. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height:…
Do you like trash? Do you like raccoons? Do you want to feel like a trash panda when you pull out your deck? Then this is the deck box for you! Inspired by the raccoons of Bloomburrow, I designed this deck box for my wife and built her a…
Lowe's Solar Flood Light Mesh Node Bracket System Lowe's Harbor Breeze Solar Light (Item #1234868 | Model #ZDL1362): https://www.lowes.com/pd/Harbor-Breeze-60-Lumens-1-Watt-Black-Warm-White-Solar-LED-Spot-light/5018244381 This is a custom…
Fishcaller. Works like: https://www.youtube.com/watch?v=dEw1oODA4BU&feature=youtu.be You need: https://www.mcmaster.com/#standard-rounded-head-screws/=78905acdfe584053b9f3e493019ba0d9jkr7xvcn…
Needed a trashcan next to my desk and decided to print one instead of purchasing one. It comes with a lid so you can insert a grocery bag for easy removal. Detailed printing instructions are supplied via a PDF document. I reccomend 3…
Simple hanger for your brushcutter. Tested for echo srm-222es. Printed in PETG at 20% infill No supports needed if printed in default orientation Needs 4 screws for mounting
Zum fixieren des Ladekabels im Auto / For fixing the charging cable in the car
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
Embracing the whimsical spirit of Disney, I am uplifting 3D-printed models atop Disney-themed trash cans, paying homage to the magic and wonder that Disney has brought into our lives. These intricately crafted pieces serve as a heartfelt…
Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…
Hermes is an easy to deploy external node enclosure, version 2.0 now supports the RAKWireless 19007/19003 and HeltecV3/V4 (with MPPT solar controller!). It enables you to deploy external nodes for MeshCore or Meshtastic (or others!)…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
Remix of one Lid to fit the imho easier and faster trashcan print. Print in normal setting, can use 0.3 until the top pattern starts, see the 3mf
It's a cupsized trashcan for the cars cupholder. Three different models, one with Trash Can, Trash Cup and one without any text cut in the top. Printed in place without any supports. Will work right of the bed. For your disposal ;-) Enjoy.
This is a desk trash bin that I have found is really useful for keeping my office desk tidy. It features a knurled design that creates a nice optical effect. Print it at 0.2mm layers in your favourite filament and enjoy a tidier desk :p
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
I love going on road trips in my Ioniq 5. However, I always face the challenge of not having a good place to store trash during my travels. So, sketched this, fits perfect in the centerconsole. I printed with 0.6mm nozzle and 0.48mm layer…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Switch and charger board from amazon - see photo… The tabs for the screws must be removed from the switch. Simply bend them…
Created the provision to use a standard SHC M2x8mm screw to attach the switch.
A side trash bin for anything using 3030 extrusion, but is specifically for the Prusa XL. Note: Cant remove the bin when the bed is at the lowest level. Raise the bed to remove.
This is my figurine of Grace Ashcroft , a character from the new Resident Evil: Requiem . She is an intelligence analyst for the Federal Bureau of Investigation (FBI) who is tasked with investigating a mysterious death at the Wrenwood…
Ein Mülleimer der aus 2 Teilen besteht, der Halter an sich und der Sicherungsring für den Müllbeutel. Ich nutze ihn für die ganzen Filament-reste die sich bei vielen drucken ansammeln. Print Settings: PLA 4 Walls 4 Bottom + 4 Top Layers…
Da meine Halterung für die 70Mai Kamera defekt ist, sie aber dennoch einwandfrei funktioniert, habe ich eine neue Befestigung für die Autoscheibe konstruiert. Benötigtes Material: M3-Schraube - Since my mount for the 70Mai camera is…
Here is a mini square trashcan. I personally made it to hold my used daily contacts and keep it on the bed side table instead of throwing them all over the floor. I found that using 1 magnet in the middle is strong enough to keep the lid…
This small desk trashcan was designed to be printed in vase mode. The model has a size of 204x204x250mm and should fit on most 3D printers. Important⚠: The model must be printed with a .6mm nozzle. Other nozzle sizes will not work cause…
This is a GoPro mount for my 2019 Mazda Miata ND GT and also works for my Hyundai Kona. The circular clamp dimensions should fit exactly the rearview mirror with autodimming and homelink. It is angled to avoid the power connector behind…
ALWAYS ENSURE SAFETY AND USE PROTECTIVE EQUIPMENT WHEN WORKING. Diameter of the cutting surface minus 3cm equals the length of one string. If you want a diameter of 18cm, subtract 3, cut two strings 15cm long and put them on as shown in…
Nice case for meshtastic and of meshcore heltec radio board.
I shrunk the original design in order to create a diameter of 8.5 cm instead of the original 11.4 cm of the cylinder. I scaled all the pieces in Tinkercad by 74.56% Since the cylinder was going to be a long print, I also did a vase mode…
A trash can modeled to fit in the center console of the Polestar 4. It has four 9mm diameter holes in the back to press fit / glue in magnets. It prints in 3 parts: Main trash can Lid bottom Lid top You can also only print the main trash…
UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25 Added Bridge 175 V6 and bridge support lower and upper for 2X T114 and 3065 . UPDATE: 2026-05-18 Added Tall Antenna support for long antennas +80cms with 23mm radius…
This is a dishcloth hanger for the kitchen using flexible TPU. My remix version splits the body in two and have easier TPU model to print, original requires supports. Print settings 0.2mm layer hight No supports (except for original ver.)…
Check out our frog trashcan! It’s a fun and easy way to throw away trash. Shaped like a cute frog with big eyes and a round mouth, it adds a pop of color to any room. You can print it small or big to fit your needs. Plus, it’s perfect for…
Meshtastic or MeshCore Router/Gateway/Repeater based on Heltec Wireless Stick Lite v3 with additional components: LM2596 DC/DC Step-down Power Supply INA219 DC Current Power Supply Sensor BME280 Temperature, Humidity, Barometric Pressure…
The rear camera that comes with the RedTiger F7N Dashcam is intended to be mounted on the rear of the car and the bracket that in included is limited to mounting on horizontal surfaces. This bracket will allow you to mount the camera on…
Post-apocalyptic Soviet apartment building (Khrushchyovka) inspired by abandoned Eastern European urban architecture.
Modified the file to allow room for the connectors on the bottom.
The first of a series of doggy planters/pots. This model can be used as a simple desk vase for pens and other stationery, or you can print the planter insert with drain holes and turn in into a cute little planter pot. Looks awesome in…
My Nextbase 522GW came with two adapters for attaching to the window, a suction cup and a flat plastic base for use with a small piece of 3M VHB. I had only used the suction cup for years and now that I want to permanently attach it with…
This is a 3mm, 4mm, or 5mm knurled knob that has a bolt and nut into it. Used to screw into threads of a heatset or 3D print that has threads printed into it. These can be printed with no supports.
This is designed to hold 3x 18650 Li-ion batteries, 3x 110x60mm solar panels, an MPPT solar charge controller, and a LoRa radio for Meshtastic or Meshcore. I've only tested it with an NRF52-based radio (Heltec T114) but it's possible with…
A compact LoRa SolarNode case that is suitable as MeshCore/Meshtastic® repeater. It offers enough space for up to 4x 18650 cells. 🛠 WORK IN PROGRESS: This project is still work in progress. Some dimensions still might change in next…
Put garbage in the trash! This simple tile lets you get rid of something you don't need any more. But only three tiles fit in the bin. This is a tile for Zack Freedman's Game Hextraction. See https://www.playhextraction.com/how-to-play…
Print in place, lid and trashcan seprately. Print lid from the top No supports, no rafts, disable skirts to fit in 220x220 bed. Fully 3D printed, no external parts required. I printed mine with PLA, 15% infill WORK STILL IN PROGRESS TODO:…
The windscreen centre pod is a good place to attach a dashcam but the covers are quite thin, they aren't flat in the centre and i found creaked annoyingly if a camera was just stuck onto them. This attachment clips around the pod and just…
Meshcore / Meshtastic solární node pro RAKa. RAK 4631 + RAK19007 Base Board 6V/500 mA solární modul 8000 mAh Li-Pol akumulátor MPPT 6V Kovový stahovací pásek Solární panel přilep silikonem nebo jiným voděodolným lepidlem. Verze se liší…
Summary This model combines the 4 STL files of the lid from the original model into a Single model that is ready for printing with no gluing necessary. These were combined using Tinkercad. Combined STL files: trashcan_top_handle.stl…
Certain versions of the VanTrue N4 dashcams do not have the mount for the CPL filters they (and other third parties) sell for these cameras. This model fixes that, allowing for any 37mm lens to be attached to the camera. The adapter is…
Simple hexagonal box for MeshTastic / MeshCore repeater. Suitable for hanging, e.g. on a tree. Suitable for use with six solar panels 110 x 60 mm (6V 200 mA) - glue e.g. with silicone sealant. For connection it is necessary to use 6 M3…
I would recommend printing front and back separately for minimum supports and then glueing them together. However, I attached a complete model as well, but I've never tried printing it. Please be extremely cautious when removing the…
This is a replacement part for the Garmin Mini dashcam (1st gen). I have only tested it with PLA. Was plenty strong (printed with 6 perimeters) and fit nicely into the socket of the dashcam. Only problem I could imagine would be the heat…
A simple wall mount for the HUSQVARNA 553RS Brushcutter. Can also fit other models. Use some washers when fastening. Use Brim for good adhesion, print upside down (like the picture i added)
for the hinge i used a 1mm welding rod. And for the tyres i used 1.75mm filament Category: Models
This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…
Simple little clips so that I can hang a generic plastic bag behind the center console as a trash can.
Description This 3D model is a versatile flashcard box designed to enhance your study routine using the Leitner spaced repetition method! 📚 The box features removable, adjustable dividers, allowing you to organize your flashcards into…
Recommended to print out of PETG or other heat tolerant filament. No supports needed. Scale to whatever size you need for your project. Use double sided tape or adhesive on the back.
This is currently in beta and changes will be made. If you modify or remix please share the files so I can add them here! Would use with Noctua 120mm Fan https://amzn.to/3X9QLkA Also, there is a middle extension piece if you want to make…
Simple hangers for sponge and dishcloth. Printed without supports but with brim. Material: PLA Layer high: 0,3 or lower.
The original case design for the Heltec V3 Lora board has been modified for the Heltec T096. Secure with a M3x12mm screw. Fits: - Battery up to 8mm x 30mm x 48mm (Extended version: 10mm x 30mm x 48mm) - U.FL to SMA Pigtail 10cm long -…
I bought a 2-channel dashcam for my 4runner and I was left feeling that the methods for mounting the rear camera were wanton. as such, I created this attachment for the rear camera that places it very near the glass and exactly in the…
Keep your workspace clean in style with this compact mini trash can featuring a smooth, self-balancing swing lid. Designed from the ground up and fully 3D-printed, this little bin adds personality and function to any desk, workshop,…
Cover works on all box versions. UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25: Added Bridge 196 V6 and bridge support lower and upper for 2X T114 and 3065. UPDATE: 2026-05-08: Added Bridge (double antenna for two…
This trashcan is used for your trash from prints
Mount for Fullscreen Dashcam Mirror for Fiat Ducato 250. Added a Riser for RVs with Front-Plissee printed in ABS with Support and 50% Infill. M4 Screws and Nuts needed Photo shows older smaler Version.
Clicker for arbalete. Attract fish using the click sound underwater. Category: Hobby
Filament Bag Desktop Trashcan English: Reusing is so important nowadays, so I asked myself what I can do with all the filament bags (and it feels like I have tons of the bags) I thought I'd make a table trash can out of them. So at least…
-Print the fins four times -Assemble by gluing the parts together -Attach a nut as a counterweight with two zip ties
The motor cable holder must be inserted from the back because the z rod is in the way. Lower part that clips to the frame is designed to go harder in. You must use some force and bend it a bit backwards to fit. It is designed like that…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
Comes in three variations. One is a planter with drainage holes and thick walls. The other two (one STL for vasemode, and one STL with a slight thickness to the walls) can be scaled up to desired size so it can be used as a trashcan.
A simple trash box with backboard to catch discarded filament from the Bambu A1. Make sure to print in vase mode!
Uses a single 18650 battery sled (secured with m2x4mm) faketek doesnt need any hardware to mount just clips in N type fits well. Lid snaps closed, secured with an M3x8 and one m3 heatsert. No button needed to press reset, the lid has a…
English Since I couldn’t find a suitable enclosure for the XIAO nRF52840 & Wio-SX1262 Kit, I designed my own. The design is intentionally kept simple and avoids unnecessary frills. The USB-C port remains accessible, and the reset button…
Its a 3x3x24 trashcan for Gridfinity. This desktop gridfinity trashcan is designed to use those little doggy poo bags as a trash liner, and has a recess to index whatever rubber band or alternative attachment mechanism 3u down to secure…
A shelf which can be attached to your faucet with a hanger for your dishcloth. The arm can swivel so you can rotate it out of the way when not using it. I got inspired by the remix of my faucet shelf by @Skalman so I combined the two and…
for my fishes its enough
Overview This dashcam rear-view mirror mount is designed so that the dashcam never falls down again. Usually, dashcams come with a suction cap mount for the windshield and these like to fall down on warm days, hitting dumps or just after…
If you download and build this design, please rate it! A classic DIY reference station for an outdoor solar node. Existing designs for Meshtastic/MeshCore solar nodes involve using Harbor Breeze (Li-ion battery) solar garden lights. A…
My VW Up had no Trashcan in the canholder. This is my version of a simple Trashcan. Fast and Easy Print. Print instructions nothing special.
Print in PETG, ABS or other filament capable of withstanding car temperatures. Use the original mounting bolt and nut to connect the adapter to the camera (See pictures). I printed mine in PETG with 100% infill and 0.12mm layer height to…
In order to be able to use my dashcam 70mai (model M500) in several vehicles, I have created another compatible holder (to stick, to fix ... ). To attach the holder, I share the bracket from https://www.thingiverse.com/thing:6236453 fully…
![Kabelclip fürs Auto / Cable clip for car DASHCAM and SMARTPHONE [PETG and TPU Version]](https://media.printables.com/media/prints/552878/images/5759815_245953e8-271d-45d0-a252-8548549ca984_155cb0e4-9909-4e34-804f-34ab8d0ed35b/bearbeitet-1.jpg)
