Liczymy pasujące modele…
The evolution of the ABM -- Absolute Bare Minimum Node. This node uses a waterproof cigarette case/lighter as its enclosure with printed node sled and case holster. Glue the completed unit on the back of any "security camera" solar panel…
A compact 3-part smokers station designed to reduce mess, organize smoking aids, and make hand rolling easier. Designed around: Standard king size papers A 120mm rolling machine (RAW-style etc.) A built-in tobacco catch drawer V-shaped…
This is a smoker. It can smoke small smoke cartideges. To assembly: 1. Join the two parts of the chimney together using the fasteners. Use screws. 2. Assemble the roof with the appropriate components. Use screws. the assembling timelapse:…
The Masterbuilt Smoker is great for Jerky, so why not Biltong!!! This adapter is to add a 120mm exhaust fan (sorry of the screw holes do not line up for your fan) in place of the wood chip insert, and a simple intake screen to place over…
Used an old trifle bowl for the top and designed the base to have 4 ports for smoke to come up from.
I created this stencil as a birthday gift for my friend. It was printed full size using TPU and cut into 3 build plates using Orca Slicer. I then taped the pieces together before using. You can also resize the design to be smaller if you…
This is an extended ash tray designed to hold half-smoked things (cigars etc) for up to four people. Printed using standard PLA and should work with default settings (infill etc)
WLANThermo Pitmaster AddOn for an EL Fuego Portland Gas Smoker BOM: Printed Parts 5x Magnets Ø5m x5mm 3x Rubber Feet Ø8mm x 2,5mm 1x SG90 Servo 1x Wire 1x Tiny XLR Connector Print Settings Printer: SparkCube1.1XL Rafts: No Supports: No…
Um moderno e compacto Exastor 5 em 1 Atualizado (V 2.0) e Redesenhado que lhe oferece um alto desempenho e conforto. 1. Suga a quela fumaça do estanho na hora de soldar. 2. Suga a poeira na hora de lixar os seus modelos em 3D evitando…
Wanted a more compact and functional holder for the cocktail smoker, wood tins, accessories and torch. All other holders had the smoker on its side, but I wanted to be able to put the smoker somewhere other than the table after use.…
Designed to securely hold your iPhone 12 or newer while still allowing easy access to the cupholders and parking brake. No supports needed. Parts used: Apple MagSafe Charger (1m): MagSafe Charger (1 m) - Apple *note: this is the 2024 25W…
Printer Settings Rafts: Yes/No Supports: Yes Resolution: 0,2 Infill: 30%
Control knob for Trager Pellet Smoker. It may fit others, but check the STL to see if the dimensions align to what you need for your intended use. This knob is intentionally a tight fit. The tips of the knurled teeth on the smoker cut…
Earlier models of Traeger smoker grills had a recessed button to change the "p-setting" which regulates the interval time for the pellet auger in the "smoke" mode. The "p-setting" is supposed to be a way to tune the smoker so that it…
These funnels are designed to fit Hexagonal and Round Smoker Tubes in various sizes. To assist in loading wood pellets, etc. into the tubes.
Follow the directions below to make as many pucks as you want. Order wood sawdust from Amazon. There are many kinds to choose from. For every (3) pucks, mix (1) cup of sawdust and (1) tablespoon of Potato starch (starch can be purchased…
The cover I have built is a three part print. I used black PETG for the sides/top and frame. I used clear PETG for the front. I did not use any supports and printed with a .20mm quality. For the frame, there are 7 cut outs for some bar…
DymBox DymBox is a box for a fan controller. Printed from PETG, it features a ventilation grille, mounting holes, and space for a control potentiometer. Components: Fan: Link to the fan . Material: PETG. Potentiometer: Universal type…
Weil mein Traeger Ranger (https://www.traeger.com/de/de/pelletgrills/portable/ranger) ständig seine Gummifüße verliert, habe ich heute schnell neue gedruckt. Kein großes Thema, aber vielleicht für irgend jemand anderen eine schnelle Lösung.
I designed this to look similar to a 20" Chuckwagon Smoker. I painted the handles and thermometer. Settings: - PLA - Layer Height: Most parts printed with 0,2mm layer height only the small parts with 0,12mm - Support: Only the Handles and…
I just got the GE Smoker for Christmas and so far it is great. The water bin is somewhat of a pain though and I sought to solve a few problems I have with it. This model is just a simple slide on cover for the water bin so I didn't slosh…
I just got the GE Smoker for Christmas and so far it is great. The water bin is somewhat of a pain though and I sought to solve a few problems I have with it. This model is a simple slide on sieve to empty the water out without the burnt…
I, like most, use home improvement store buckets for my smoker's pellets. I have been cutting the name off the bag and putting that in to help keep straight what is what. I modelled these up and the first one came out great. What I did on…
Grill tools holder to be attached with screws. 11-5/8" Wide
Designed to securely hold your iPhone 12 or newer while still allowing easy access to the cupholders and parking brake. No supports needed. Parts used: Apple MagSafe Charger (1m): MagSafe Charger (1 m) - Apple *note: this is the 2024 25W…
I have made this decoration for my DIY smoker and grill. While modelling I have used photo of pig from @DenysHolovatiuk on Freepic, so technically its his model, I just made it 3D Also the font Ive used is called “Rowdies” from Google…
These are the 3D printable parts necessary to make an Arduino PID electric smoker controller as outlined in this video tutorial:
These leg extensions press into the hex head on the end of the factory adjustable legs and raise up the cold smoker so it can align with the main smoker cabinet. Category: Other
Hi Here is a magsafe support for iphone in Porsche Macan 2015 (maybe others models) printed in PLA it fits perfectly with these items : https://www.amazon.fr/dp/B0CBVGZJPD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1…
Ein Aschenbecher. Geht passgenau beim Model 3 in den Getränkehalter. Unterteil und Oberteil vom Boden her Drucken. Deckel mit Stützen drucken Erhöht den Chillfaktor ungemein.
After a 35 mph wind blew my Pit Boss pellet smoker over (luckily no damage) i wanted to make something to keep it from sliding around. This is made for wheels that are 100 mm in diameter.
My masterbuilt 40" smoker was sitting a little too low to directly attach my Masterbuilt coldsmoker unit. Designed these feet to bring the main smoker to the right level. Print two of each, PETG recommended, 20% infill. The OpenSCAD file…
This is a functional decoration for a hive smoker containing embedded magnets. These magnets serve multiple purposes, e.g. attaching the smoker to the exterior metal surface of a car for safe transport (relatively inexpensive replacement…
Magnetic holder for my smoker temp probes. Magnet hole is for a 20mmx5mm (19.5x4.7mm) magnet. I included the f3d file so you can modify the hole to meet your magnet size. 3.5mm connector and 5mm probe storge. It should be obvious, but……
Simple pellet name badges to stick to your smoker to remember what type of pellets are in there. Seeing as I cannot keep it straight. Get some sticky magnetic strips from @mazon to apply to the back. Print however you see fit with a layer…
ein Halter für Smoker passend im Getränkehalter fürs Auto, damit der Smoker nicht rumfliegt
Podkladový návrh byl vytvořen za pomoci AI (Leonardo a ChatGPT). Tištěno na jednobarevné tiskárně s výměnou filamentu. ROZMĚR: cca 60x64 mm, výška 3 mm TISK: Tryska: 0.4 mm Výška vrstvy: 0,16 mm Podpěry : nejsou potřeba EN: The base…
Smokercraft trailer, one of the snap-on side lites (clear plastic cover for marker lights) was broken. These fit perfectly. I printed mine in Prusament Orange Transparent. How to print - One of the shapes in this project is a negative…
The Smokpub comes in a very protective box, but it doesn't travel well and takes up a lot of space. This model is a case for the main Smokpub smoker and the tin boxes of wood. The tolerances are tight, so I recommend printing just the…
Print with support. Standard supports worked better than tree supports for me. I printed with ASA because it will be stored outside in a box on the porch and temperatures can reach 100F. I included the Fusion360 file if you want to add a…
We have, and use often, a Camp Chef pellet smoker. We happen to have the MZGX as you see in the pics but I suspect this will work with any of them with this control panel. The smoker has been great other than the control panel just keeps…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 190.48x190.48mm in size Additional information attached in files Enjoy !
This page is for a smartie dust dispenser that I am currently making. I will be posting all of my progress and models. How to use: Use the Smartie Smasher to crush up any remotely-hard candy (So far smarties work best) into a fine dust.…
This funnel makes it much easier to load up pellets or woodchips into those hexagonal pellet smoking chambers found online.
OVO JE BOŽIĆNI PUŠAČ
This stash box is a functional organizer designed to keep smoking accessories neatly stored and easy to access. The layout includes dedicated compartments for a grinder, lighters, rolling papers, tips, and other small accessories, helping…
Wanted to make a 2 piece pellet smoker sift for my 20L bucket. It has a diameter of 255mm, so it maxes out my printer size. Print the pellet smoker sift top to check if it fits your bucket. For the bottom part of the sift you can either…
chances are low but never zero you may have purchased a port charlotte whisky once and kept the metal box been gifted a crofton whiskey smoker kit by your marvellous wife thought the cardbox is way to big this model solves these niche…
The evolution of the ABM -- Absolute Bare Minimum Node. This node uses a waterproof cigarette case/lighter as its enclosure with printed node sled and case holster. Glue the completed unit on the back of any "security camera" solar panel…
A compact 3-part smokers station designed to reduce mess, organize smoking aids, and make hand rolling easier. Designed around: Standard king size papers A 120mm rolling machine (RAW-style etc.) A built-in tobacco catch drawer V-shaped…
A compact travel version of the original Smokers Box rolling station. Designed to keep your rolling area clean, portable, and waste-free. Loose tobacco falls through the honeycomb work surface into the pull-out tray below, keeping your…
This is a smoker. It can smoke small smoke cartideges. To assembly: 1. Join the two parts of the chimney together using the fasteners. Use screws. 2. Assemble the roof with the appropriate components. Use screws. the assembling timelapse:…
The Masterbuilt Smoker is great for Jerky, so why not Biltong!!! This adapter is to add a 120mm exhaust fan (sorry of the screw holes do not line up for your fan) in place of the wood chip insert, and a simple intake screen to place over…
Bring this iconic green ogre to life with this incredibly detailed 3D printable STL figurine that captures every wrinkle and expression perfectly! This masterfully crafted statue shows the beloved character in a contemplative pose,…
Transform your 3D printer into a gateway for creating this captivating character figurine that brings mysterious charm to any space. This meticulously detailed STL model showcases a contemplative figure in casual attire, perfect as a…
This is a simple cover to protect the digital controller on Masterbuilt digital electric smokers. There is also a 3mf file attached for users of Bambu Studio Print Settings Printer Brand: Bambu Lab Printer: Bambu P1S Rafts: No Supports:…
Designed for the Bradley Smoker bisquette hopper, this rain hood fits over the hopper to help keep rain away from the bisquettes. Keeping the bisquettes dry improves feeding reliability and helps reduce swelling and feeder jams during…
Update 04/06/20 - Used this for the first time last night making some steaks and got the grill up to 450. Handled worked fine and didn't seem to be a problem on the first use. I've had my Vision Grills Kamado grill for a number of years…
Instructions (please read!): Unfortunately, I did not create the STL model in proper orientation. Therefore you have to adjust orientation in your slicer before slicing it. The face with the 5 holes should be directly placed on the…
Sick of that hot door swinging into you while you're trying to tend to your smoker? Fret no more! This magnetic holder easily installs (in seconds) onto the handle of your vertical smoker and keeps the cabinet door open for you. This is…
Are you tired of ruining your rolling papers, If so this is the print is for you ! This box allows the user to carry a box of king size rizla rolling papers as well as four backup matches should your lighter go missing. There is also…
I own a Traeger Pro 575 Smoker. I've had ongoing issues with mice sneaking into the smoker at night and making a mess. I suspect many other people have the same issue but haven't realized it yet. Key signs are small black pellets on the…
Ich habe hier eine Tankerweiterung für den Meateor Pelletsmoker von Aldi erstellt. Der Griff wird mit einer M5 Schraube am Deckel befestigt. Schaut gerne bei uns auf Youtube und im Discord vorbei ;)
Fits the Green Mountain Grill Thin blue smoke tube. I was sick of trying to load my smoke tube so I made this funnel.
A simple accesori for keep the Aladdin Chef 100% Smoker with all their parts attached. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15 % Filament: Amazon PLA or PETG Category:…
I really like to smoke cigarettes when I'm driving long trips (Smoking kills). So I made this design to hold my cigarette pack and my lighter. It's made for classic 20 cigs pack and big BIC lighter Very effective, it's attaching on most…
I got a pellet smoker, and to easily remember what kind of wood pellets I have in there, I designed these labels with holes at the bottom for magnets. Since this is designed to be put on the smoker itself, I would recommend a filament…
My first thing ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: noname PLA White Category: Household
Video of this in action, with context: Check out online recipes for making the mixture, using sawdust, potato starch, etc. A PDF is also attached here in the files section, with the recipes from the linked video. This print is done in 3…
This adapter is for installing a Savannah Stoker PID pellet smoker controller in a Camp Chef smoker. This is not compatible with all Camp Chef smokers but will fit an XT (my smoker) and other models that use the same size original…
Print from 0.12mm to 0.28mm layer height (depending how smooth you want it). Recommended settings - 3 perimeters, 0.12mm layer height, 50% lightning infill, 7 top, 7 bottom layers. *2 versions included - 1 is for smokers, other is just a…
para el cambio de color solo necesitáis meterle un M600 a la maquina y que pare en cierta capa casi todas cambian en la misma capa pero mejor verificarlo antes de mandarlo a imprimir. Después de la impresión se recomienda meterle una fina…
This is a stand I made for my Fireboard device. I wanted it up off the smoker table at a good viewing angle, with room to plug in the sensors. It fits nicely around the device, holding it in place snuggly. I'v been using it now for a…
It's a ring that holds your Zigaret or something else... It fits 6-7 mm filters.
This is a ThermoWorks Billows fan adapter to fit on the air intake pipe of an Oklahoma Joe Bronco Drum Smoker (regular or pro model). The air baffle has to be removed as this fits fairly snug over the pipe. It's angled a bit to keep light…
Used an old trifle bowl for the top and designed the base to have 4 ports for smoke to come up from.
One of the knobs on our Masterbuilt Sportsman Elite smoker broke, so I modeled a new one. I painted an arrow onto it with a silver Sharpie. I used PLA, and that has worked fine for well over a year. Prints without supports.
This slides over the water tray of the GE Profile Indoor Smoker to keep the spent pellets from falling into the sink. Whipped up in Tinkercad in 15 mins, so may be a few refinements as I use it more. Highly recommend printing in a more…
This is installed on the Traeger shelf so it doesn't chip the paint away on the legs as it rests against them. These press in to place. Secure with super glue. Print Settings Rafts: No Supports: No Filament: n/a TPU Category: Outdoor &…
Cord wrap-holder with optional retainer clip for a new 2024 ReqTeq Flagship 1100. not sure if it will fit or work on different models or years for ReqTeq pellet grills , mine is brand new as of 2024 and it fits mine . The retainer clip…
A simple smoker model Print Settings Rafts: No Supports: No Resolution: <= 0.2mm Post-Printing glue parts together How I Designed This Category: Food & Drink
Now you can remember what type of pellets you have in your smoker. Uses 15mmx1.5mm round magnet. This effect can be achieved on any printer if you pause the printer to swap filament once the bottom part is printed. A french version is…
I created this stencil as a birthday gift for my friend. It was printed full size using TPU and cut into 3 build plates using Orca Slicer. I then taped the pieces together before using. You can also resize the design to be smaller if you…
Mit dieser Räuchervase könnt ihr eure Räucherkegel abbrennen lassen. Einfach die Teile aus PETG oder ASA ausdrucken (PLA kann ich durch die Wärmeentwicklung nicht empfehlen). In den Fuß steckt ihr die Schale eines abgebrannten Teelichts.…
If you wanna get a bit fancy carrying your cigarettes on a more permanent holder, use this to hold it for you. You can simply press it inside and when you need it, give it a slight nudge and see it come out effortlessly. Recommend to…
This is an extended ash tray designed to hold half-smoked things (cigars etc) for up to four people. Printed using standard PLA and should work with default settings (infill etc)
Only got a few minutes to smoke? Need that nicotine buzz RIGHT NOW? Smoke an entire cigarettes at one time with this innovative design! Printed in PLA.
This is an organizer for a drink smoker kit. Mine came with 6 tins, a lighter, a spoon/scoop, and a cleaning brush for the screen. I printed it in PLA most other options should work too.
This is a handy box for smokers, featuring different compartments for whatever you might want to put in there. It is sized so that it can comfortably fit a lighter, different sized papers and a cylindrical object of your choosing. I…
