Liczymy pasujące modele…
Snapmaker U1 DIY Top Hat By. Srin Snapmaker U1 DIY Top Hat 입니다. This is a Snapmaker U1 DIY Top Hat. 최소한 250mm 출력이 가능한 프린터가 필요합니다. A printer capable of printing at least 250mm is required. https://github.com/srinn/Snapmaker-U1-DIY-Top-Hat…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
This is a remix from a model from BR562 on SKFB. I figured there weren't any really good models of the UNSC's primary tactical dropship so I updated this one and added many surface details the original lacked. Always drink from the skulls…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
Does not require support material Print with back face (power cord plugin area) on the print bed
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
some fixes more sturdy rings for better grip in plaster better printable no support needed any more based on Putzausgleichsring-Fabrik -- spacer for pattress box factory https://www.thingiverse.com/thing:4332330 by Johann_LA May 02, 2020
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
bring your dart game on a new level. With a self printed light ring. You can stick a normal LED stripe on the inside of this ring. I used this one for my build: https://amzn.eu/d/9oLgnr6 Advantage of this stripe in my opinion is the fact…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
I needed a plug for the Gardena Premium System, as there's no direct coupling with waterstop. So I made one 3/4" and one for the standard 1/2" system. Included is a sealing ring. Print the plug in whatever you want, the sealing ring in…
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
A vertical stand with a perfect fit for the Focusrite Scarlett Solo. Free some space on your desk !
Hanging lampshade ideal for IKEA HAVSRIS. I wanted to have a similar look of other lampshades, but more discreet as a secondary light, useful when reading. I'm sharing the design with you in case it can fit well your home decor. I…
Mit diesem Schlüssel lassen sich EATON-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu befestigen…
I previously had a Scarlett 2i2 Gen 2 mounted under my desk with the mount from ziller88 . After the Interface died i bought a 2i2 Gen4 and modified the mount to work with the new interface. It comes in 4 Versions: Scarlett 2i2 Gen4 desk…
Under desk mount for the Focusrite Scarlett Solo 4th Gen. (note: 3rd gen and 4th gen are different sizes, 4th gen is bigger so this will not fit the 3rd gen) Designed to not require supports, to allow this it should be printed on one of…
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
This is adult Asriel Dreemurr from Undertale, made by request from my girlfriend who loves the game. Asriel just slides in the base (which is reversible, there is the Delta Rune or Flowey, you choose). It holds well, but if you want you…
This ist a basic replacement for the Paw Patrol Lifesaver which can be shooted by the Sea patroller or the surfboards. And of course with the fusion 360 file. Feel free to modify. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
(DE) Set von einfachen, stabilen 90° Winkeln. Bohrungen mit Kegelsenkungen. Versteifungsrippe in der Winkelecke. Vielfacher Verwendungszweck. Schnell und leicht zu drucken. (EN) Set of simple, sturdy 90° angles. Countersunk holes.…
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
Da bei meinem Intex ZX300 Poolsauger nach jeder Saison der Antriebsriemen für die Reinigungsbürste das Zeitliche segnet und man von Intex keinen Ersatz dafür bekommt habe ich mal einen Riemen mit dickerem ‘Rücken’ gezeichnet und in TPU…
Holder for mounting your Focusrite Scarlett Solo 3 under the Desk. The Solo 3 can be inserted after mounting the holders under the desk. Dimensions: Height: 45,5 mm Width: 24 mm Length: 57 mm Hole diameter: 3 mm Print instructions Layer…
It's unlawful to waste a drop of sriracha, yet that cap makes it so hard to prop up your bottle to get every last drop. This stand allows you to invert your bottle in your fridge or countertop, assuring you still have more sauce at hand.…
The Focusrite Scarlett Solo/2i2 4th Generation seem to have no way to disable or dim their status LEDs. If the unit is in a bedroom and the computer is never shutdown, this presents a problem. This is just a basic cover to snap on when…
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
This bracket has mounting holes compatible with the Balolo mounting grid, but of course you can also screw it to the underside of a desk. Easy to print, PLA is fine, no supports required.
This should help to align the PEI sheet with the printbed.
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
Tray uses all available footprint of the box and has a space for tokens from the main game + same ammount of space for the addons. Also there is a space for one pack of 7 dices and sharpie. Small tray also fits into a box and contain all…
Asriel Dreemurr A version of adult Asriel Dreemurr sitting. there are two version, this is my first model, if you need something, let know and i will fix it. Feel free to Share your Makes and tag me on Social Networks if you print it! You…
Focusrite Scarlett 2i2 - Vertical Stand.
🇱🇰 ශර ලකවට සදරයන පළගනම! Welcome to Sri Lanka! Sri Dalada Maligawa (Sinhala: ශර දළද මළගව), commonly known in English as the Temple of the Sacred Tooth Relic , is a Buddhist temple in Kandy, Sri Lanka, in the central highlands of the island…
Putzausgleichsring für Unterputzdosen in 19mm Höhe. F3D Datei inkludiert, so kann jeder die eigene nötige Größe auswählen Plaster compensation ring for flush-mounted boxes with a height of 19 mm. F3D file included, allowing anyone to…
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
8x clip 1 ring The Model fits the H0 Standard Mini train CLAMP a piece of Filament to it to make it look more real USE bridge mode in Cura for the Ring the Clip can be printed upright so array of 8 in one print
I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
the Scarlett Solo table attachment 3D print fits perfectly under any table, whether screwed or glued in my case(acrylic)
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Enhance your space with the Sri Yantra Coaster ! Measuring 100 mm in diameter and 4 mm in thickness, this coaster showcases the ancient and powerful…
Just a simple IO shield for a Supermicro X10SRi-F motherboard. I recommend printing in PETG.
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
This is a Focusrite Scarlett 2i2 Mount for the Balolo setup cockpit
See “Differences” below for more information
Mount for Focusrite Scarlett 2i2
A under desk mount for a Scarlett Solo. Includes ports on the back for the USB c and the ¼in Ports.
ITA: Tutti i file devono essere stampati due volte, tranne "MixerStand-3" che deve essere stampato in 4 copie. Per le parti laterali capovolgi il modello nello slicer in intrambi i lati e in modo da non aver bisogno di supporto. Consiglio…
The existing models of bottom up sriracha stands didn't fit all of my different bottle types. If this doesn't fit your bottles, the freecad source is there to tinker with. This version is with holes at the bottom for better cleaning. It…
Finally, you can get the last bits of Sriracha out of your bottle! This stand holds the bottle upside down, and lets you operate it without needing to be removed. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports:…
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
My knobs became sticky as the plasitic started to break down. So I made a replacement for them. This is a replica Knob for Focusrite Scarlett 2i4 (First Gen). Might fit other Focusrite Hardware aswell. Feel free to leave a comment, if it…
Free up desk space by moving the chonky Clarett+ 4Pre under your desk 20% infill and some supports(that take a long time) should work in almost any material Category: Other The mount is tilted just over six degrees so plugs will clear…
This is a simple m30, 34 mm diameter, 28 mm length threaded cylinder to aid in transferring viscous liquids from one bottle to another, to avoid waste. This seems to fit a Whole Foods 365 conditioner bottle, a Dawn dish detergent bottle,…
The Focusrite Scarlett 2i2 4th Gen is a lovely USB audio interface with an iconic look! However, the red metallic chassis doesn't fit in with every aesthetic around it. In my case, I was building a digital piano setup, and the original…
Mit diesem Schlüssel lassen sich Schneider-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu…
Remix of the original model to support the different size and foot/input locations on the Gen 4 Scarlett Solo
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
Backplate for Supermicro A1SAI/A1SRI Mainboards, usable in a 1U Supermicro Chassis where standard ATX backplate is too big. Print instructions Category: Computer
Includes 3 patterns of enclosure and 1 base. Included 3 patterns because I am using mine on a wall mount and decided I wanted to be able to see the red part through. And Hexagons! Initially I tried another focusrite solo mount from…
Hier der Ersatz-Rettungsring für den PAW Patrol Sea Patroller Boot
2024/09/29: This is the first revision. There's a textless and text-ful version, and the text is embossed so that you can select it easily for multicolour. Lots of improvements to make- there's too much space between item cards, the text…
modified to print without support Print Settings Printer: DIY Build Rafts: Doesn't Matter Supports: Doesn't Matter Category: Kitchen & Dining
Prints with default Prusa slicer settings.
The Colombo Lotus Tower (Nelum Kuluna) is the tallest self-supported structure in South Asia and a primary landmark in Colombo, Sri Lanka. Standing at 356 meters (1,168 feet), it serves as a multi-functional hub for telecommunications,…
Sri Chinmoy statue of Harmony (Czech: Socha harmonie) public space installation statue copper brass sculpture, buddhist monk sculpture https://en.wikipedia.org/wiki/Sri_Chinmoy Artist: Kaivalya Torphy, 2009 @ public street, Prague,…
A minimal angled desk stand for the Focusrite Scarlet 4i4 so the knobs are a little more accessible and visible. 15cm wide by 10cm deep Can be used for other Focusrite devices as well. Feedback is welcome! Updated Version 2 Uses far less…
This bracket is designed to attach your Focusrite Scarlett Solo sound card under your desk, keeping it out of the way. It's best suited for desks about 1 inch thick.
Zum aufsetzen auf die Türscharniere um die Türe anzuheben . STL Datei ist 10mm und kann einfach im Slicer von der Höhe her auf die benötigte Höhe angepasst werden. PETG Wie gut der Ring hält oder ob er schnell abgerieben wird wird sich…
Focusrite Scarlett Solo 3rd Gen cover for those who hate red color=)
Als Ersatz für die schlechten Lagergehäuse und der Lager für eine billige CNC2418 damit nichts mehr hakt. Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Grey Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts:…
Educators: Hi this is a very simple model of the mechanisms of an hidraulic shovel, the main important things you can show here are the kind of movement you can achieve with 4 bar mechanisms, the use of hidraulic forces to move the shovel…
Simple IO Plate for a SuperMicro X9SRI-F Motherboard, in case you, like me, buy one used and it doesn't come with one. I believe this will also fit other SuperMicro motherboards, such as the X7SPA-H. You may want to print the upper…
This is a gag joke for a police officer that I see regularly who loves Sriracha packets. It's based on the familiar Tactical, Belt-Mounted Egg Holder in general concept (it holds things and goes on a belt), but otherwise is my own design.…
Print as-is. It is nearly printable with the autogenerated supports. I will post the results soon. Edit : Added a new one, with the Om symbol, it requires supports for the symbol.
Rack Ears for Focusrite Scarlett 18i20 4th Gen
Designed for the IKEA HAVSRIS Lamp . It's threaded so it just screws on, replacing the placeholder screw-on thingy. I published this as a .STEP file for the highest quality model. It'll take a bit longer than normal to slice but this is…
(DE) Entdecke Deine 3D-gedruckte Lasche ob mit oder ohne Verstärkungsrippen – die perfekte Lösung für alle Befestigungsbedürfnisse! Mit sechs Kegelsenkungen für Schrauben bietet sie nicht nur Stabilität, sondern auch eine einfache…
Template to help with mounting Focusrite Scarlett 2i4 2nd Gen bracket
Friction fit 10 inch rack mount for Focusrite Scarlett 8i6
Ich habe hier einen robusten Stützwinkel designed der eventuell mit M5 Muttern bestückt werden kann
print two times on the flat side Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: Prusament PETG Category: Audio
Focusrite 4i4v4 under surface mount with screws. I left a little space for soft velcro to cushion it. If you don't use that, take about 1mm off the mounts. I included a pattern to drill holes with
I made this to install it under my desk. 0.2mm tolerance on every side, works great. 3mm diameter countersink holes, I used 4mm screws
This tool ensures that devices with built-in Europlugs (e.g. mosquito repellers, Dyson power supplies, compact adapters) sit straight and stable in Schuko wall sockets. No more tilted plugs! Simply attach the adapter to the device and…
La caja está diseñada para transportar la tarjeta de sonido Focusrite Scarlett 2i2, pero también es válida para la Scarlett solo, dentro cabe la tarjeta con su soporte y bolsa de tela. Está diseñada para poner la tarjeta en la parte…
Passender Spatel zum Entfernen von Fotoemulsion aus doppelseitigen Beschichtungsrinnen für den Siebdruck.
