Liczymy pasujące modele…
Updated model of the Suntour Command Shifters. It's currently just a friction lever. I'm hoping that someone can spare enough time to pick up where I left off. There are many issues & improvements that I'd love to fix/add, which would…
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
SR Suntour SF13-XCM bicycle fork requires frequent maintenance, when used in hard conditions. Stock dust seals offer next-to-no protection from water and sand, so these polutants find their way into the fork, reducing it's lifespan, and…
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
SR Suntour XCT JR Cap - often found on teen bikes with 24" tires and smaller. This cap is just a dust cap on the left side.
A tool to remove the top cap or adjust the preload on 32mm SR Suntour coil forks. The preload can get seized over time and so, to improve leverage, there is a 5mm hole to put a hex key through to extend the handle. The tool number for the…
Tool to remove SR Suntour top caps for service. Changed to a 3/8in square drive, and added wrench flats for adjustable
A shim that will allow you to clamp a Suntour HL-3000 “Head Binder” to the shaft of a 22.2mm quill stem. Originally, these were meant to interface with a special, thin steel locknut, all of which have seemingly been lost to time. In lieu…
For remove Suntour fork top cap. Three size (28, 29, 30 mm) available in a foldable form. The last one (30MM) is usable with a ½" torque wrench. ---------------------------------------------------------------------- Easy to assembly!
I had to service my suspension - so I created this part and some "just for fun" stress analysis. Perhabs someone can use it. I printed it in PET-G, but I guess ABS will work too. Category: Hand Tools
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
Tool designed for disassembling SR Suntour bicycle forks. This socket tool securely grips the fork nut and features standard ratchet attachments for easy operation. Available in three drive sizes to fit your existing tools Perfect for…
Adaptor for Suntour forks to receive a touring mudguard. Printed in PETG with 30-50% infill.
The original SR Suntour lockout lever on my son’s bike was stolen. This replacement fits flush into the suspension fork opening and can’t be removed without tools – ideal theft protection.
this SUNTOUR mud guard is only meant for the SR version. you will need a small screw and a nut to install it.
I created this for my bike with a SR-Suntour XCT V2 48/38/28 Crankset. The holes for attaching the chainguard are 110mm and 120mm apart. You will need 4 around 5-8 mm long M4 screws with countersunk or very flat heads. I already printed…
Spacer for reducing fork travel on air spring forks One space reduces 5-10-20-30mm Spacers are stackable Compatible with air forks that use a coil negative spring Is not compatible with EQ Air Spring forks Compatible with the following…
SR Suntour SF13-XCM bicycle fork requires frequent maintenance, when used in hard conditions. Stock dust seals offer next-to-no protection from water and sand, so these polutants find their way into the fork, reducing it's lifespan, and…
No special requirements on this print. There is no support needed and I printed it in PLA with 5 perimeter walls and 20 % infill to be strong enough.
Designed for a Suntour SF7-NEX-4000 Should fit most forks with 25.4mm stanchions if your measurements are: - Stanchion inner diameter: 22.4mm - Cap outer diameter: 23.2mm Design files are fully parametric to fit any fork at onshape :…
My lockout lever was just gone one day so I decided to make a replacement for the specific one.
I bought an e-bike so I could keep up with my kids NICA team. I broke my fender on my first trail ride. I figure that it might be better to print replacement parts since I can, rather than spending 10-20 times as much to replace them…
Note that this is the narrower 20mm tool with 10 teeth, used for a cross bike (the larger 12 tooth tool is for mountain bikes).
Headlight mount for SR Suntour NX1 fork. Will probably fit also NEX fork but not tested.
A tool to remove the preload adjustment knob on Suntour mountain bike suspensions like the Suntour XCT V3
I hated how the Suntour Command Shifters are impossible to get & no good mass-produced version is offered. I never used them, but they look very intuitive & like a good design. These are Inventor files, not Solidworks as I'm used to. I…
Just a forks protector for my bike rockrider 540 with suntour sxr 120mm Category: Sport & Outdoors
I was unable to find them anywhere to buy, so I replicated them. Use only if necessary and at your own risk. But they work just like the original in my friend's fork. You can print them with flexible material so it'll be like the original…
Was servicing an old bike, noticed one of these missing. Quickly measured and printed my own. works great, my brother uses the bike to commute and do some XC with it and its holding up.
A spanner to remove the threaded inserts at the top of your Suntour MTB forks for maintainance
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
I recently attended bike tech workshops through the Professional Bike Mechanics Association (PBMA) where I received training in a whole bunch of different things from many different brands. I was constantly thinking "I bet I can 3D print…
Mounts your Headlight to a SR Suntour Suspension
This is a replacement clip for sr suntour forks and possibly other forks as well. Mounting requires an M4 Bolt. At the end are pictures of the part it replaces. Printed in Prusament PETG Galaxy Black with 0.24 mm layer height and 0.4 mm…
Hi, I designed a removal tool for the suntor NRX 7600 for the Plastik Cap. Printed in PLA, 45% infill, 6 perimeters. Works well on a ½ inch tool. Best regards, Diego
These adapter was neccesary because the local shop only had a 30mm mounting for a light which fits un the Suntour Fork. With this little thing you are able to use the longer mount delivered with the Busch&Müller Lumotec light. pinted on…
The Suntour XCR 32 rebuild kit includes the seals, but no tool to press them into the fork. This tool is the proper diameter to fit around the top of the seal and set it using a rubber mallet. The tool overhangs the outer edge of the…
I designed this tool to remove the top caps on my entry level Suntour fork.
The lockout cap for my bike came off and the gear key fell out and only found the cap so I had to make a new one No supports 100% infill
I created this mount, as my Suntour NCX-D (Through axle, air) front fork does not have fender eyelets and instead have 2 screw holes about midway up on the fork. Unfortunately the fender came with stabilizer rods that are too long to use…
Replacement lever for the lockout lever on a Suntour Epicon suspension fork. (Fits many other Suntour models as well) Designed for a friend's bike. Fits nicely onto lockout gear and snuggly into o-ring seal.
Spare part wasn't available to buy, co made it 3D printable. Source model at OnShape https://cad.onshape.com/documents/82bf2349bfc603cbfc6122d3/w/34f4549633724f1143986806/e/2edb4c230d39882583ee05f5 Print Settings Printer Brand: Prusa…
This is replacement for release lever of remote lock used on SR Suntour Epixon 2015 MTB fork which I have snapped in crash. The lever shape donť exactly follow original. It is little longer, so whole assembly can be twisted little bit…
I printed it in TPU because I wanted it to be a little sticky/elastic to have a tight fit and also for temperature resistance. You can adjust the tightness of the fit by simply scaling the model in your slicer software. I provide you both…
A remix (my very first remix!) of the original STL file created by @cmh_13634 for the SR Suntour fork top cap to accommodate a smaller ¼ inch socket wrench. Remixed the design in Tinkercad, which is why some surfaces are not as smooth as…
TAPA PRECARGA DEL RESORTE CON ESPACIADOR PARA ENDURECER LA COMPRESION SPRING PRELOAD CAP WITH SPACER TO HARDEN COMPRESSION
This socket is specifically designed to work with SrSuntour forks (for top cap removal) and a 1/2" wrench.
Replacement FEE501 part for SR Suntour XCM (older version - may not fit newer one)
SR Suntour Raidon 34 has 32mm inner diameter, which does not fit official Apple Airtag (slightly!). I've found these knock-offs on AliExpress and they both fit and work quite well (not as well as official AirTag, but better then nothing)…
I do not use the remote lock mechanism on my fork, so I removed the remote and printed this cover instead. For reference, here what has been removed from the bike:
Adapter to install a bike mudguard on a Suntour 34 Fork to avoid having to use zip ties. Be aware you need to drill three holes in your mudguard to install this as it uses three clips pushed through the mount. Three bolts are required to…
Small shim for using modern brake cable housing with 80s/90s Suntour brake levers designed for oversized, 6mm housing. Only testing with Suntour XC “Multimount” levers, but it should work with similar Suntour products of the time that…
Didn't spot a lockout here for these line of forks and I never use or even wire up the lockout on my forks. still testing. Category: Sport & Outdoors
