Liczymy pasujące modele…
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…
Building a large minifig wall meant that printing AJ Raceway's awesome hexagons individually was taking a little time. So I whipped up some larger options depending on the size of your print bed. You can now print a set of 3 or a set of…
This is an extended version of Tonyk's excellent Pokeball card box, for those with more cards (also fits sleeved cards). This version's roughly 3 times longer than the original, measuring ~178mm long. You need to print 2 copies of the…
If you like my work, don't hesitate to support me by paying me a ☕. Thank you 🙂 https://ko-fi.com/vinis
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
I designed this to fit onto the door of my wifes Cricut maker so the mat doesnt flex when moving in and out. This is designed for the 12x12" mat, but i also have a design for the 12x24" mat also. i printed mine with split colours so its…
Redesigned the slot little bigger to fit more screw types. Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work. Offset pin/hole: 0.3mm circular Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5…
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
all stock hardware. I used pps-cf filament but anything should work
This is a remix of “Laptop Stand” by finke. I really liked the original model, but added 15" computer support and some nice to haves like a stand version with no lip so you can close the computer and an optional connector for…
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Extension for the USB plug. Specifically designed to fit this 90° cable ( UP -USB 3.0 Male to Female variant, see the picture), but will probably work with other similar cables too ( like this one ). You don't need any additional…
This coffe bean reservoir extender allows you to tiple the amount of coffe beans stored direct in your machine to not run out of coffee beans so fast. It ist designes to fit the original lid and use the grinded openig as well. This…
It's an extender for coat hangers, to hang a coat hanger on a coat hanger to have a coat hanger chain gang of coat hangers. Print instructions Category: Household Supplies Summary It's an extender for coat hangers, to hang a coat hanger…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
These are fast and easy to print. I have included a Mk3S gcode for a single and set of 6. The gcode is optimized to print fast... about 16 minutes. I recommend scaling Z to 80% for a more flexible ear saver. I have handed out about 300 of…
Extended/custom shaped barrel. No supports should be needed. Hope you enjoy. Included is the barrel latch, there was alot of play and lack of spring. Made latch catch a little thicker. I’ve uploaded my own version/custom form fit grip. It…
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
✏ Back to School with a smart and useful idea! How many times does a pencil become too short to hold comfortably, even though it still has plenty of lead left? With the Pencil Saver , a simple 3D print, you can give your short pencils a…
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
The Mask strap extender helps reduce the pain and pressure of wearing a mask for a long time. Fits every mask and head size. Challenge: Help others around you - print the mask strap extender (ear saver) for them. Especially doctors,…
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
Thank you Paul for the design!
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
Note: This project is not being updated at the moment, I'm working on a different printer based on this but I can't promise any dates for release and it changes a lot of stuff so it's almost a new printer. Still, feel free to download the…
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
Use the text tool in Prusaslicer to customize your signs :)
An extended magazine I created for the Glock Fidget Keychain – 3D-Printed Mini Slide-Action Toy by Rectangle. You can print standing on its bottom and no supports are necessary. I've created multiple other accessories for this model, you…
This model was found on thingiverse: https://www.thingiverse.com/thing:5507861 by DIVMSTER who remixed it (added the magnet recesses) from the original: https://www.thingiverse.com/thing:3054777 by SkornoThePro I printed it for a family…
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
With this and a few keystone jacks you can embed a Linux SBC (rpi) in your project and never have to crack the box open to service it. Print panel side down, supports very required. A 0.3mm layer print comes out quite usable. The panel…
This is a battery cover for the PSP 2000/3000 series that enables batteries to fit from the 1000 Series. Easy Print, just have to use a .16 or .08 setting.
JERRARI3D.com The GEN2 Gridfinity Drawers V2 design combines the best of both the GEN2 Storage System and the Gridfinity system by Zack Freedman . The V2 is a reimagination of the original as a drawer more than a tray, this allows for…
Couldn't get the orginal (https://www.thingiverse.com/thing:3336214) to fit on any available feet. Remixed it to fit these feet (https://www.prusaprinters.org/prints/120019-tripp-trappr-stokke-back-feet)
Źródło oznaczyło ten model jako treść 18+.
Hook part extended by 5mm on both mounts. Category: Computer
Edit 02/21/2023: Added ver.4 & STEP files. Added holes for set screw (M3). Lost original ver.2 so named the updated one ver.2.1. Edit 03/17/2020: Added image with ver.3 Base plate/grip extension for 10 round MecGar 1911 magazines. I…
This model replaces the chrome cap of the BMW coupe E92 extender arm with a hook that grabs the seatbelt successfully much more often than the original design. Designed to be a near perfect fit with the OEM shape. I recommend printing in…
Extended Caulking Nozzle for getting to those hard to reach places!
GoPro arm extender - straight - 25mm, 50mm, 100mm
Tendedero Caravana Tendedero que se inserta en el rail de la caravana, autocaravana o camper. Simplemente con ponerle una cuerda tienes un tendedero para cuando no tienes un árbol cerca. Impreso en Petg. Al 20%, menos la guia que tiene el…
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
A Remix of Modular Filament Storage System that contains extended models! Extension nubs allowing for multiple rows without screws are a part of the updated wall mount brackets. The wall attachment full sized modules can also be used to…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…
This is a remix of xanoy's phone holder. When I printed mine, I realized that my phone charger just barely fit. I just did a couple of quick plane cuts (split models) and copies in fusion 360. This keeps the same pattern as the original…
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer. The Bambu Long Drop…
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
These extended front parts allow the can dispenser to work with 500ml Ø66mm cans. First upload was too wide. Removed 1cm. The parts should still (barely) fit on a prusa mini, and the 3mf file has all the modified front parts with infill…
An outlet box extender to use after renos... In 20mm and 10mm depth... Print Settings Printer: Ender 6 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: 3D Printing Canada Value PLA PLA white How I Designed This…
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
Remix of Ratchet toothpaste tube squeezer by Luke's 3D. Everything is the same except for: It can now fit up to a 65mm wide tube Removed watermark Increased tolerance on axle so it fits better (may need a tiny bit of sanding)
This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…
Update 2021-05-17: Minor fixes to the foot and second segment. Adjusted the sizes of the low B/Bb holes for better tonality (the low B natural was formerly too sharp). Increased the height of the ridge for easier playability. This is an…
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
Simple print that doesn’t change the way the magazine works except to add some more area to grip. The PMAG baseplase is almost a decoration unlike the Glock baseplate for the 10 rounders. So changing it is easy and it also isn’t really…
Extended lower and upper corners to fit Ender 3v2. Printed with PLA Print: 0,2 mm layer height, 0,4 mm nozzle, 40% infill. Supports only on the lower corners on the 90° overhang.
1 gang electrical box extender 6mm (1/4") and 12mm for extending box when wall is covering has changed. I printed with PLA at .20mm layer height.
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
This is a custom base plate for an extended CZ Shadow 2 magazine. This baseplate can be used with picatinny rail attachments. My case was to attach Mantis, so it can be used together with a holster. Print it vertically with support (back…
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 500g spools have a diameter that is too small and the rollers won't touch…
Similar to Milwaukee 49-90-2037. Sized for the Fuel 2.5 gallon Packout Vac, but I imagine this would fit other Milwaukee vacs. Print standing up, no support. Use a ½" (OD) vinyl hose, will be tight to install but will fit.
A print of the Surgical Mask Tension Release Band for Ear Comfort & Extended Use from the NIH website. Perfect for the Prusa Mini. https://3dprint.nih.gov/discover/3dpx-013410 No nurse/tech/doctor will refuse these. Contact your local…
This remix adds picatinny rails to the Dart Zone Outlaw! It's longer than RedCowl's original model, to give the front of the blaster a chunkier feel. Like RedCowl's design, this is a drop-in that replaces the front rails and re-uses the…
The original design doesn't fit MiKA3D's 500g spools correctly, so I modified the tabs so they're easier placed on these spools.
Used with multiboard: https://www.multiboard.io Extended remix of https://www.printables.com/model/704739-dual-wire-cutterplier-holder-for-the-multiboard that has five slots. It slots into two octagonal holes for better stability.
Info Both designed for 8mm arrows. I print arrowhead with 100% infill PLA and it works fine. For more durability, you can use etc. PETG, ABS. Recommended usage: Use the extender as close to the tip as possible for maximum efficiency…
If you need a few cm more to close the button
The Azeron Cyborg is a highly customizable gaming keyboard that's largely 3D printed. All of the paddles are around 2mm thick, which is great for most of them. Actuating the knuckle paddles means I have to take my finger completely off of…
Simple +2 grip extension that slips on with the stock magazine retention plate. Category: Hand Tools
Extended camera arm links Available lengths (measured distance between mounting hole axis): 50 mm 75 mm 100 mm 125 mm 150 mm Print settings: Support needed (just like the original model) if printed standing upright. No support needed if…
This is a variation on Sebastian650's excellent nose flute design. I used meshmixer to make the mouth of the flute narrower, which allows much higher notes to be played. Here's a table showing the range I can achieve with each model. The…
BOM: Printed with ROSA3D High Speed PLA Gray This is an updated "Version 2" of my printable nut inserts, designed specifically for 40x40 T-slot aluminum extrusion profiles (standard 8mm or 10mm slot width depending on the manufacturer).…
How to use it - Important notice Press fit, just push the pencil making sure it makes contact with both set of prongs. It may scratch the paint on the pencil a bit. The extender needs at least about 1.5 cm of pencil for the plastic prongs…
A simple card to throw down and put your kickstand on when parking on soft ground. Much cheaper than an a fancy bolt on. If you lose or forget it, you can just print another one. This one has a Honda logo.
pencil extender for slightly use Derwent and Faber castell pencils. extenders are 100m long with slot 40mm deep good for the last ⅓ of your pencils. didn't have any heavily used Derwent pencils guess I like Faber castell. step file…
To impress the American consumer, makers of toilet paper have been putting more and thicker paper onto the rolls. Many people can only buy toilet rolls that are so large that they will not fit in the dispenser found in their homes. This…
Love the original modular glasses rack by @waxpoetic ( original here ), but I found the tray to be too shallow. The original tray is ~42mm deep. I made two variations of the tray at an extended depth (see dimensions below).…
Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
Extended Stability Feet to connect 2 Prusa Steel Sheet Holder and / or Prusa MINI Steel Sheet Holder based on Angelo's model
A remix of antoooooooooooonie's headphone mount to accommodate the metal frame supporting the wooden top of my desk. The 15mm thick desktop was supported by a 25mm (1") square tube frame. The mouth of this clamp is ~42mm to accommodate…
This is a large hook that you can use to hang a cord or hose. A remix of https://www.thingiverse.com/thing:1679354. This hook is slightly longer/larger. I printed the hook using PLA (50% infill, no supports).
remix of a remix extended mag release
This is an extended base for Makita trim routers (RT0700, DRT50, RT001G, etc) Remixed from https://www.thingiverse.com/thing:2519083 Update Nov 2025: I've uploaded an updated v2 base plate that fixes the outer edge so it is concentric…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
![[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE](https://media.printables.com/media/prints/1137278/images/8582109_08a5091e-d6fd-4b16-aede-06f1f3f273cc_a863e0eb-efc0-4315-8953-1c3240258fd2/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-2-of-3-printables-thumbnail.jpg)
