Liczymy pasujące modele…
Add drawing with acrilic markers. Glue some brooch pin. I printed with two color combination, but it does not matter. Use contrasting colors to make the decor stand out. I used PETG but you can use PLA.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…
Timelapse is recorded using this holder AnkleKris is back with a new creation! This time, I present to you... epic drum roll ... the Core ONE Phone Webcam/Timelapse External Holder ! It’s a quick and practical 3D print — just 9 minutes…
This right angle adapter is designed to seamlessly fit a 100mm air hose onto your xTool P2S. Perfect for tight spaces. Print the adapter on the little box, for minimal supports and optimal direction of the layerlines. Also you'll need an…
Simple tool to aid in cutting accurate and repeatable spline grooves in the corners of picture frames. Print at 50% infill or more for greater strength. I used PLA but others will work. When using this jig I recommend using a clamp to…
Dimensions 130x100, can be scaled how big you like Gyroid infill 5% 3 walls has a pause in slices, start with black than switch to your preferred color Got inspired from, but i need one that could be made without AMS…
I couldn't wait for the PCB to arrive to build this, so created this 'dummy PCB' that takes up the same space as the PCB itself. This means BMO can at least look the part, even if their buttons are just for show right now ;) Hope it's…
Fun swear jar with a back hand.
When moaning about how slow 3D printers are, a friend of mine said "Good things come to those who wait" and so I decided to turn it into a plaque to affix to my CR-10s to remind me to stay patient! Scaling: The model is about 200mm long,…
I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has…
Those cheap hot melt glue guns don't have a very good base to stand on. So I decided make one. Print instructions Category: Hand Tools
Frustrated with small patches to adjust live Z? If you have a self levelling bed you should be able to do all Z calibrations from one region of the printer bed. If that is the case why print another patch on the back of the bed when the…
3D printed cover of the 25th anniversary Foo Fighters special "Times Like Those". I've printed it on my Prusa Mini with the following height settings: 0.10 - 1.00mm : Black PLA (Snapmaker) 1.10 - 1.30mm: Red PLA (das filament) 1.40 -…
Reamers, often seen as a precision machinist tool, but everyone who 3D prints items that have to bolt or screw together, or has parts that slide on pins and holes should own a cheap set of hand reamers. They make short work of cleaning up…
"Where are they?" Enrico Fermi Paradox
This remix is only for V1E LowRider makers wanting to combine both regular size YZ plates + my hidden belt mod + this holder. If your situation does not seek to combine all three, then the original design should be fine for you. For print…
For someone who has poor eyesight, this check writing guide assists in locating where to write out the check. Place the template on top of the check and the openings in the template define where to write out the info. A note-writing…
How to use ? Just fill a plastic bottle with water (a bit warm is preferable, but don't go for too hot, aim for room temperature or slightly above) If your windshield is in bad condition and the water is too hot, it might lead to your…
Dab on those haters hating on 3D-printing! Flat and stand-up versions are available. :) Category: People
This is intended to be created in PC and solvent bonded using a polycarbonate solvent. I'm not sure as to the fill.
Use all those bit of filament that get left over on a real that are not quite long enough to reach the filament detector. Category: 3D Printing
Cover for X-axis just for a nicer look. The covers by MannixxX (and boogie) did not work for me, because a camera arm is installed in the place where the base of the honeycomb cover should go. I remixed the cover in two new versions: my…
its v1 with a gun arm and wings separated for people without ams
Those are simple coasters.
I needed a quicker way to grab my coffee without the lid popping off so designed this sleeve with a handle that clears the cupholder in my truck. Printed with supports for the handle in petg.
A hose holder/guidance for 2 80mm dust hoses for the dusthood i designed. It fits nicely on the sorotec basic line z axis and is mounted with 2 M5x25mm screws into the sliding block (they package more than you need, so you should have one…
Print three different cans and then one lid three times.
make sure you size it up to 2543.45%.
As always the parametric FUSION360 file is included for you guys to improve it on your own needs. Comments and critics are welcome. Prints well with ABS or PETG, whereas the hooks are more reliable in PETG. PLA for the holder for sure…
Picture Hanger for those big wooden frames print it vertically for best stability.
This custom-designed wall mount is a perfect replacement for anyone who has lost the original IKEA Sunnrestad mount. It ensures secure attachment and easy installation, providing a durable solution for holding up your IKEA Sunnrestad…
this fun print is great for you or as a gift! this awesome print does require supports.
I like coffee and always need more storeage containers, I buy supermarket own brand 500g or 1lb cans, they make great storeahe containers but do not look good. Cover with vynil after a while they don't look good again in a short while,…
3d printing is an exercise in failure, persistence and endurance. This trophy celebrates all the things that wasted so many hours for 3d printing engineers and enthusiasts. There are two separate instances of layer shifting A piece…
UPDATE: I revised the design: a larger top curve and angled front part of the clip fits much better on the belt. I also reduced the size of the ridges, giving it a sleeker profile without reducing strength. I have a belt that has a bit of…
This model was designed specifically for my case, so its height might not be perfect for everyone. If you're lucky, it will match your desk height, but if you need to adjust it, I've included the Fusion 360 file so you can make…
This is my version of a weighted handle for a particular razor. I find it helpful in reducing my tremors. I printed mine with Voxel PLA Pro using the most basic settings in Bambu Studio. The handle dimensions are square so that the…
Reforceiment Palo-churro Adapter for those affected by DANA
There Are 10 Types Of People Those Who Understand Binary And Those Who Don't
These parts were used in an experiment in which I assessed how the position on the print bed affects the dimensional accuracy of 3D-printed parts. Accurate dimensions are essential for functional components that must fit or interact with…
its v1 with a gun arm and wings separated for people without ams
I couldn't wait for the PCB to arrive to build this, so created this 'dummy PCB' that takes up the same space as the PCB itself. This means BMO can at least look the part, even if their buttons are just for show right now ;) Hope it's…
Fun fact: Has that amazing click sound :) Installation: Meant to be taped with double sided tape.
Remix of Ultimate drawer system and Carry That Skadis! Last time I released a horizontal expansion: Magnet self lock for Ultimate Drawer System This time a vertical expansion: Carry that toolbox (handle for Ultiamte Drawer System) Remixed…
