Liczymy pasujące modele…
Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
Basic trim removal tool set used commonly for working on vehicles. I printed mine in PETG PRO with extra top/bottom layers and extra walls to increase strength. I would recommend adding a brim so they don't come unstuck and using supports…
The Singer 911 DLS Turbo Road is a masterpiece of automotive artistry — a modern restomod inspired by the legendary Porsche 911 , combining classic aesthetics with cutting-edge engineering . This model faithfully captures the signature…
Prying and Opening Tool Flat - Rev.3 - Smartphone - Notebook - Laptop - Automotive Open your tech device and safely remove components with ease. Essential for DIY repairs like displays, batteries, motherboards, headphone jacks, joysticks,…
Step-by-step: Place the insert so that it protrudes from the head side of the pin. Put the pin into the hole. Push the insert until it is flush with the pin’s head. To remove the pin, push the insert inward — the pin will unlock and can…
These are for TPU only, they don't work well with hard filaments because they are completely ridged if you don't print TPU. These are very robust and will fit most vehicles. I have a bunch of sizes and you can mix and match and just print…
My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…
I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
These small pry tools are designed to help you remove plastic trim pieces from your vehicle without causing damage. Using these tools can ensure that the trim pieces come off in one piece. There are two versions of this tool: one with a…
This mod will void your SSD's warranty but makes using them for recording much more convenient. Assembly requires two original screws and three additional M3x8 ones for the lid.
Hello, do it tomorrow fat Jordan sign. Pause in gcode to manually swap filament colour. Thanks for your download, enjoy the print!
I've printed this to use inline with my heated bed inorder to add an extra bit of protection for my custom printer. Print both parts add the crimped spade connectors and glue together with acetone. I've used 16AWG silicone wire inorder to…
A heavy duty headrest hook to keep your groceries, shopping bags, iPad, purse, and more secure in your car or automobile. Features: Heavy duty hook. Rotating latch to avoid accidently knocking the hook from the headrest bar. Instructions:…
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
Este diseño es un porta fusible tipo automotriz, ideal para aplicaciones eléctricas que requieren conexiones seguras y duraderas. Diseñado específicamente para terminales aisladas y cables calibre 14-10 AWG, este modelo destaca por: •…
This is a tool I made to assist in getting wires into the “loom” or wire wrapping in my car. There were tools available online but the cost seemed ridiculous so I designed one for myself. The tool is made in two pieces so they will need…
My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…
I designed this for a friend that happens to be a car mechanic with own business, to have something on his desk to put the business cards into :-) Stand includes extra front badge to include your own Logo (possible to multicolour-print…
Hello, tomorrow problem sign. G-code with embedded pause to swap filament color manually. Thanks for your download, enjoy the print!
I made this because I lost the pin to one of these fasteners on my motorcycle. I decided to make the entire fastener in case I needed the whole thing. 0.20 layer height 100% infill Brim used on pin print by object instead of by layer…
Pry Tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive - Strumento di apertura - UPDATED - 05/11/2025 Update Cleaned up geometries for improved accuracy and performance. Fixed functional aspects of the project to…
Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…
Printed in ABS for use in automotive Print it as it is horizontaly for strenght Fits 7 - 8 mm holes Is better tu use a rubber oring before assembly and to eliminate any play 0.2 mm layer hight 100% infill use supports Use brim for…
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
Pry tools - Opening Tool Flat - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you…
Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…
Opening Tool - Smartphone - Notebook - Laptop - Automotive Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks Category: Hand Tools 10/10/2024 Added Rev.2 23/04/2024 Added Rev.1
Hi everybody, only a "multi remix" of fuse holder stackable with the possibility to mount it in a panel, I liked the original projects https://www.thingiverse.com/thing:1787609 and the remix htps://www.thingiverse.com/thing:1927820, I…
This is a flat car silhouette inspired by the iconic BMW E36 , designed for easy PLA printing and clean final results. Perfect for: Garage walls Automotive workshops Home or office decor Gifts for BMW fans The model prints flat, requires…
The fuse puller that came with my car (Astra J) broke the first time I used it so I re-created it in fusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament:…
Tomorrowland PeopleMover Carriage
There are two types of clips, one to be printed in TPU, for easy removal and reuse. Another made to be printed in ABS or PETG that you can use an M4 screw as a central locking pin. São dois tipos de clipe, um para ser impresso em TPU,…
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…
Simple and ready to install model of plastic clip used to keep VW T4 headliner in pleace but I guess it could be used in different places and cars.
Anything within your reach. Hang your purse, emergency kits, trash bags, just about anything you'd need within arm's reach. Simple print in place design without the need for additional supports. I recommend printing the file the includes…
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
Fiat Automobiles Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/Scale to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
I designed a sunhood for the Atomos Ninja V and Shinobi V. It is printed in two parts and then glued together. The main aspact is the screw to hold it in place.
If you follow my blog or even my uploads here on Thingiverse you may have noticed that I'm a bit of a Disney theme park fan. So it may be no surprise that when I decided to try my hand at modeling something from reference images I chose…
Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…
This "spike" you can use to fasten the guide wire and/or the perimeter wire for your Automower. It only has 3 sides, because I wanted it to be printable sideways (to strengthen the part). But it works very well anyway. The two last…
this is still a work in progress. but print with abs, ASA or PETG for best results with adaptive layer Hight. The small part is supposed to pressfit on the axel.
Jednopólová zásuvka s drátem pro automobily
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
Automotive / Marine Fuse & Relay Block Printed for the engine bay of my truck, bracket will be self tapped to the inner fender. Relays/fuses not included. used tiny bit of RTV on the contacting edge of the "Panel.stl" Printed "cover.stl"…
Rather small model with forgiving tolerances so most printer should be able to print it. Should print fine at 0.20mm. Please share your makes.
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
Customized the other pry tool holder design to fit my Tresalto pry tools perfectly. Print Settings Printer Brand: FlashForge Printer: Adventurer 4 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Flashforge PLA Red Notes:…
Are you tired of your charging cable getting in the way of other controls in your car or truck such as the radio or getting caught on the gear shift? Wrangle that cord with the Cord Wrangler. Secure the Cord Wrangler to the desired…
4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other
These parts are similar to Lisle 37000 or Harbor Freight 63959 . Why buy a set when you can print the one you need? Fitting size is marked on the part. Some complaints about the HF version is that the opening is too narrow, so these parts…
Tomos APN 6 air cooler, fully printable NO supports All bridging must be no problem
Altura Minima Recomendada 150mm Diseño El diseño de este modelo 3D está inspirado en el personaje de Sailor Saturn, Hotaru Tomoe, capturando su vestimenta icónica de marinera con detalles precisos y una posición estática que refleja su…
Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…
There are a number of different types of devices for automotive use (phone mounts, GPS, backup cams, etc) that connect to a stand using a socket that fits over a 17mm ball. This is a replacement stand for those devices. I made it to…
For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…
I couldn't seem to find more of these that I could use with the Atomos connect on my Ninja V. I can confirm this works with the Ninja Ultra with a Connect module, the Shogun Connect and the Ninja V on a multi cam module as well. I used…
Provides 9 slots for keeping the spare fuses for your car or RV easily accessible and tidy. I printed mine in TPU.
A sun hood for the Atomos Ninja V and Shinobi V that can be screwed into place. Supports are required and it's important that the model's position is upright with the edge of the screw contact point facing down.
simple print suport on the lead for the opening
Double-mounted cicada suncatcher pendant with an easy color change with filament change. We use this as both a suncatcher and a necklace. Here is a link to necklace chains if you need it: https://amzn.to/3vREu9y Enable ironing for a…
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
3/8 Automotive air fitting holder to hold tools such as a needle scaler, air ratchet, blow gun, etc. I made it into a bar to be attached to whatever material you choose. I attached mine to heavy-duty magnets to be moveable from my toolbox…
I needed an automotive fuse for a project. so here's one. I've never tried to print one but i'm using it to create a fuse holder for my custom 3d printer. Category: Parts
Remixed the design to fit screwdrivers instead of a shelf. Works great :-) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Formfutura PLA Category: Tool Holders & Boxes
I hate having to go scratch in a bag or box to find the fuses I need, so I decided it's time to organise. I will post some variations on this design as well. Category: Automotive
Fun dangling earrings with two-tone cicadas. Utilize filament changes for color change. We like to print on clear to highlight the details and for some added shine. Size up or down but watch the size of the post hole. You can also make a…
I printed out of pla at 0.2mm layer height. When putting in the new scrivet try not to force it otherwise it will break. This scrivet is designed for an 8mm hole scale up or down as needed.
Print this model at best with a 0.4mm Nozzle for best quaility but a 0.6mm works too, Do a colour change in your slicer above height 2mm, Ironing all top surfaces gives you a really clean result
print parts laying on their side with hole horizontally using PETG or PLA secure using #10x3/4" pan head square drive metal screws straight into the existing wheel tread profit
I created this to replace my dads air vent tabs for his KIA Sorento. The alternative was for the agents to replace the whole vent system. These work better than the original part - as the original is a 2 piece clip which is difficult to…
This model should fit and protect most 12V car batteries' terminals. If not, please, download, remix, and re-publish!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Automotive Differential Demonstration Model This is a 3:1 automotive open differential demonstration model. This type of differential can be found on rear wheel drive cars and allows each wheel to turn independent of one another. I…
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
Case for relay automotive 12V
print with the fan flange against the build plate
Please like and post your makes ! Why pay $ 120 for a battery pack while you can do it for less than $ 25 ... And using the same brand of batteries as the original ... For : Husqvarna Automower 105, Automower 305, Automower 308, Automower…
To protect the automower from be stuckt at the trampolin.
Best to use black en white PLA for the best result, but other colors are possible. Load the TMLBlack and TMLWhite files as a single object an flip it with the logo faced to the bed. Don't forget to buy me a beer :)…
Tired of chasing coins around your vehicle? I got tired of digging change out of the storage tray in our car so I came up with this little coin holder. It is designed to hold nickles, dimes and quarters so they can easily be accessed…
Atomos Ninja V / Shinobi 5" Screen cover
This is a toy automower (robot mower) loosely modeled after the Husqvarna 430X. My young daughter is a huge fan and we do the neighborhood tour to look for them everyday back from daycare. I thought I'd print one for her but found no…
When the cover is attached, the threads and connectors on the side are still accessible.
Hi ! Here are Heavy Duty replacement Screws intended to secure the charging station to the ground. Print in PETG or ABS because PLA is biodegradable Fill 100% You dont have allen key adapted ? Don't matter, use the Hex side of a bit…
Tomorrowland 2022 Reflection of Love stage. Let me know how it prints and if any changes are made!
This is a pen and business-card holder designed to look like a stack of three tires with a fourth leaned against it. I printed mine using the following print settings: 0.08mm layer height 5 walls 15% infill No supports
This model should fit and protect most 12V car batteries' terminals. If not, please, have a look at the bigger model I posted on this site.
I threw out the original back barrel of the automower and replaced it with a printed part and an ikea RILL 2"/50mm castor. as this got stuck with grass and mud and rusting bearings I replace the original wheel with a tpu wheel sealing two…
This model is part of a Fusion 360 practice project focused on designing curved, organic and complex geometry. The original piece is based on an automotive wheel cap, recreated from reference images. These types of designs, with smooth…
I modeled this after the pre-2021 Tomorrowland Transit Authority Peoplemover sign when it was sponsored by Alamo. I modified the sign proportions to accommodate printer limitations, but maintain the spirit of the original design. The sign…
Frame to attach the Small Rig Sun Shade to the Atomos Ninja V
This is something that not many people will need, but if you happen to have a Husqvarna Automower, model G1, G2, 210C, 220AC, 230ACX or Solar Hybrid you might have experienced that the front wheel falls off due to corrosion of the…
Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg
