Liczymy pasujące modele…
Printed with PLA, PETG is allright as well. The clock module is 56x56x17mm. You can buy with different stick length. I have used 8-10mm but 5-7mm may be even better. The seconds hand seemes to be impossible to print so I have left it out.…
I helped an organization with around 100 apartments located in TN & KY find a way to stop bed bug spread. Limited research shows that devices like this help to stop the spread, and maybe even kill them off. Supposedly bed bugs like…
Stopping plates for T12 soldering station under desk hanger I found these pretty under desk hangers from maco2229 which I wanted to use. But my KSGER T12 soldering station's and SMD rework station's face plates are flush with the rest of…
Stackable Ikea 365 food container holder as topping station. Can hold number of container that size of alu profile cutted recomend 10x10mm alu profile 1mm wall thikness (i bought bauhause) Cutting formula: [containers] X 150mm -14mm Food…
To organize the pizza topping packets we get from our local Marcos pizza parlor I created this custom size lidded storage box. The packets are 2" wide by 3" tall. Please add comment to request other sizes or create them yourself with the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Made this myself (1st project and took a few tries) because the original needle of the Game: "Game of Life" from Hasbro broke Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No (included in stl already)…
I printed mine in PETG, lying down on the side (the one with the “X”). I used double sided tape to mount it, but you can use the screw holes as well.
Add a playful and festive touch to your holiday decor with this 3D-printed cupcake decoration! This unique piece consists of two separate files: one for the cupcake base and another for the whipped topping. Use them together for a…
Carrie - Stopping the Car - 2013 3D printable model.
Brackets for Topping DX 5 II. v1.0 I used double-sided tape to attach it to the desk, but some strong adhesive glue would also work. I had two PC PSU screws lying around that fit the holes on the back. This way, you can unscrew them and…
Underdesk mounting for Topping DX1 DAC. Mounted using two screws.
This is an insert designed for the base game of Unmatched Adventures: Teenage Mutant Ninja Turtles, the Extra Toppings miniatures, and the Shredder and Krang hero decks. The sleeves I used are Dragon Shield Matte Clear Standard Size…
A little shelf in which you can put your topping stack. It prevents the top one from sliding around on the bottom one and getting misaligned. The top unit is secured pretty good since its feet fit nicely into the holes, however, the…
The mount provides a sleek, space-saving solution for your setup while ensuring easy access to controls. Features: • Perfect Fit: Specifically tailored to the dimensions of the Topping E2x2, ensuring a snug and secure fit. • Cable…
Selbst entworfener Topper für das Clipper Karussell. 3D-DRUCKEINSTELLUNGEN Als Infill reichen 10% Stützen : JA hat bei mir mit PLA ca. 6 1/2 Stunden gedauert.
This is a suppot to hang the Topping DX3 Pro+ under the desk with double sided tape. No holes added because i wont drill it in. There is space to fit the Remote over the DAC with the mount F3D Files attached as well.
a nice object for a wall or room roof. Have Fun
Just a simple DX1 Model. Used it to make a mount where this would mount under my desk using the rear 2 M3 Screws.
I needed more desk space and thought of mounting topping D90 stack under the table like @lucasratmundo posted here https://www.thingiverse.com/thing:4731244 but his design needs a bigger printer and couldn't print it on Mk3s. So, i…
underdesk mount for topping E50, use support for mount wing. screw it. It is mounted on the lower foot, and there is free space at the top, so you can lift it slightly without having to release the mount when you need to access the…
Protective case for the Topping G5 DAC/AMP so it can easily be carried on a belt. There's three versions included: • With belt clip and logo • With belt clip but without logo • Without belt clip and without logo Print settings Printed the…
A container for yogurt (or other creamy solids), salads, or the like. Has a divider for included spoon and a top lid for toppings. The container total is 15cm x 8,7cm. The main container is 9cm and the top container 5cm. Please note:…
Remix of Topping DX3 Pro+ bracket by Paetthe (https://www.printables.com/model/811508-topping-dx3-pro-bracket) I added holes on the other side of the bracket to make it easier to mount using screws. Simply hold the amp and brackets…
Deutsche Verkehrsschilder 283, 283-10, 283-11, 283-20, 283-21, 283-30, 283-31 „Absolutes Haltverbot“ in Originalgröße von 600 mm. Du benötigst einen mehrfarbfähigen Drucker oder musst unterschiedliche Elementhöhen mit Filamentwechsel…
I needed a bracket to mount the stack under my desk to free some space I suggest to use support for the screw stand
A complete kit to mount the Topping MX3s Amp+DAC, Remote and Power Supply neatly on the underside of your desk, or anywhere else you'd like to put it! Other Topping Amps / DACs These parts were designed for the MX3s. However, some parts…
When done in 1 mm it gives good straight speed transfer to the ball. While doing with 2 mm it gives les speed but more spin. I used the the Bat from strshp https://www.printables.com/de/model/231060-table-tennis-bat hope ya gonna enjoy.
These are two brackets which allow the Topping Audio E70 DAC and L70 Headphone Amplifier/Pre-Amp to stack neatly, connecting them into a single unit – the EL70, if you will. They are designed to have a tight friction fit. The front piece…
I've printed it in PETG with 0.6 nozzle, 0.32mm Layer height.
Deutsche Verkehrsschilder 286, 286-10, 286-11, 286-20, 286-21, 286-30, 286-31 „EingeschränktesHaltverbot“ in Originalgröße von 600 mm. Du benötigst einen mehrfarbfähigen Drucker oder musst unterschiedliche Elementhöhen mit Filamentwechsel…
Very basic stand specifically designed for pairing a Topping D10s DAC with a Fosi BT30D Class D mini-amp. 140mm X 150mm. Top could be glued to the base if you wish, but sits fine when left loose. Print Settings Printer Brand: Creality…
Mount the holder with wood screws or tape, slide DX3 Pro from the front until flush. The part is designed in a way that the feet don't interfere.
Topping D90 / A90 Feet I wanted to increase the space between my Topping D90SE / A90D dac/amp stack as this gets very warm to the touch and the existing rubber feet are only 5mm tall. I also wanted space to run my headphone cable…
topping NX4 DSD under desk holder
The key material needed for upgrading your toppings, hopefully you've got enough!
It doesn't need supports everywhere, It doesn't need “touching build plate”. If you have average cooling….
I made an adapter to use my PetOde Universal Dusty Brush with my new TOPPIN Cordless Vacuum Cleaner S2. ===== If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal Print Settings Printer Brand: TEVO…
no stopping sign multicolor friendly
A themed decoration designed to feature the soccer superstar, commonly used for birthdays, themed parties, and soccer-related celebrations.
A custom name keychain with raised lettering, a rounded rectangular base, and an integrated loop for a key ring. Geometric toppings add curved surfaces, repeating openings, and texture across the face. Choose a flowing gyroid, a branching…
A desk stand for the Topping DX3 pro+ with a lip for a speaker on top and a hook on the side for earphones.
This plate allows temporary mounting either one or three PDL/Clipsal Iconic series switch modules while you are painting or gibstopping. It holds them behind the finished wall level inside a regular sized gib/plasterboard cut-out, so the…
This is a remix of the original insert by @PaleVermilion_794062, please give all due credit to the original creator. I simply adjusted this already fantastic insert to hold everything which I purchased in one box to save space.
This is a pizza with some toppings that you can print and add to a play set.
Is your Topping DX3pro+ a little too much Top? Does it need a good Bottoming? Do you dream of a desk where all the clutter is only clutter, and no useful things? Only me? Anyway, these should be pretty self explanatory. Slide the front…
I printed in PETG. Works perfectly.
🍕 Who ordered extra CLICKS? A deliciously fun Pizza Clicker created with Clicker Factory's Split Parts feature! https://clickerfactory.com/ 🍕 The pizza base stays fixed, while the toppings become individual clickable parts! Mushrooms,…
I wanted to put my DAC-AMP-combo in my rack so I designed this, the back piece is designed to fasten with 4x M3x12 or 16 into M3x5x8 heated inserts. The sides will then be jointed with 6x M5x12 hex screws and M5 nuts, recomended to use…
AI used only for raspberry and bramble
Modular Rack for my Topping D50 III DAC & Geekom IT13 Mini PC. Should work with other similar sized Mini PCs and DACs. Please feel free to send me a message if you need different sizes. Use glue to attach TPU pads to feet. I sprayed…
My wife and I love to drink coffee. She is a natural barista when it comes to making a beautifu and tasty cup of coffee. Well, she asked if I could make a stand to put our favorite Torani sauces and McCormick topping on. So this is what I…
This is an insert designed for the base game of Unmatched Adventures: Teenage Mutant Ninja Turtles, the Extra Toppings miniatures, and the Shredder and Krang hero decks. The sleeves I used are Dragon Shield Matte Clear Standard Size…
Mount the holder with wood screws or tape, slide DX3 Pro from the front until flush. The part is designed in a way that the feet don't interfere.
A themed decoration designed to feature the soccer superstar, commonly used for birthdays, themed parties, and soccer-related celebrations.
The key material needed for upgrading your toppings, hopefully you've got enough!
I helped an organization with around 100 apartments located in TN & KY find a way to stop bed bug spread. Limited research shows that devices like this help to stop the spread, and maybe even kill them off. Supposedly bed bugs like…
**I used Blue Gateron Switches for these and they worked great. I just snipped off the two little metal connectors on the bottom, or I even just bent them over and it worked perfect!** **These are the keyboard switches I used** -…
