Liczymy pasujące modele…
It all started with the idea to push the limits of the 3D printing to create a precision tool that I could have made out of metal instead. The first version was without real bearings so after a while the main bearing started to get…
It uses a regular RC car motor, and for my version I used a 4wd belt from a scalextric Ford Focus, but since the tension is adjustble, you should be able to find something that fits. An additional (and not yet fully developed) feature is…
A very simple, cost effective, robust, slot car tyre/tire scrubber for truing and balancing slot car tyres/tires for the cost of less than a coffee. You will need; 1. 2x Carrera 20366 replaceable braids 2. 1x PWM Controllers (Dimmer…
Since I replaced the original antennas of the Caddx Vista, I also needed a new mount. So fix measured the antenna and created the mount.
🚀 Elevate Your Goggle Game: Walksnail Goggle X TrueRC Patch Holders! 🚀 Ahoy, drone enthusiasts! Tired of those clunky antennas making your Walksnail Goggle X unnecessarily bulky? Say goodbye to the oversized look and hello to sleekness…
A simple mounting option to attach 2 TrueRC air X² antennas to the Walksnail Avatar or Fatshark Dominator HDO3. The mount is screwed to the two upper (omni) antennas. I've used carbon fiber reinforced PETG to print, but other filaments…
Just a quick tinkercad remix to fit the TrueRC Core and Cherry antennas. I don't have the frame yet, but original dimensions are respected.
An improved version of my previous Tyre Truer. The major revision is in the swing arm eliminating the cantilever tyre. Beefed-up the pulleys wheels and designed in one piece construction for the base mainly to to avoid possible…
These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…
Tyre truer for slot cars in scale 1:32 and 1:24 Befeed-up some of the components. Print Settings Printer: Velleman Vertex K8400 Notes: The tyre shaft is the standard 3/32" with the bronze bearings (one side flange only). The sanding wheel…
Based on MrFlippant Original Idea and design of the MSR Tire Truer Sanding Plate Reciprocation Machine I made it work for the Overdrive tire truer RSM4. I have printed everything in ABS on a Voron Trident I have used the recommended Voron…
This is a front rail system to mount the TrueRC X²-AIR 5.8 MK II PAIR FOR HDZERO VRX4 on Walksnail Goggles X. Mirror it on your slice software to get the other side. Here is the Antennas:…
Good choices of patch antennas for the newer FatShark/Walksnail Avatar goggle are few, and hard to find. This print makes it easy to adapt the set made for DJI to direct mount on these goggles. Print in TPU for a snug, secure mount…
I built a KayouMini with the components I had left: a Flywoo Nano V3 and a TrueRC Singularity antenna. The camera mount lets me install the ELRS antenna and route the XT30 cable over the top so it won’t get hit by the props. The antenna…
Dual antenna mount for the Vannystyle frame. Meant to be used with the Truerc Matchstick 65mm version. .f3d is included so feel free to remix!
I needed a way to hold the antennas when not connected to the goggles, and I moved from 4 stubbies to 2 stubbies and 2 patch, so I modified the 4 antenna case I did before to hold only 2. I added a way for the antennas to not fall all the…
Update 3/22/23 - Added sliding plates and extra clamp for the front edge. Use these to restrict the sanding plate from racking by using a piece of paper or razor blade as a shim when setting the clamps against the sanding plate.…
just double side tape the patch on the cover and use the stock fan and sooling thingy.. it should fit. :) i printed mine with 0.2layer height … i dont think anything else is important .. orient howeveu u think its good for u .. i did mine…
I remixed bvandevliet faceplate to have a thinner model than Letsflyrc model so it fits more easely in the goggle case. Reuse the goggles fan and fits 4 truerc x-air patchs. I use dab of hot glue to hold the components in place. Printed…
Description (English): This adapter is designed to securely and precisely mount the TrueRC X² Air 5.8 MK II antenna onto HDZero Goggles. It ensures a stable fit, optimal alignment, and prevents the antenna from rotating unintentionally.…
2 versions for Rush Cherry (or similar antennas) or TrueRC short antennas. 4mm tube part can be secured with zip ties. I recommend using the TrueRC short or similar antennas as the will create less resonance when flying.
Antennamount for ImpulseRC Apex Frame. TrueRC Antenna + Tracer Antenna
Just add a tiny zip tie at the top of the print to create pressure on the antenna so that it doesn't move.
Use this model for your own assemblies, for example, in a pair with fpv-glasses, etc. The dimensions have been kept according to the real ones.
A super slim mount for dual TrueRC Singularity antennas for the AOS 3.5 Evo Frame. It has been reinforced to be as crash-resistant as possible. Print in 95A TPU with tree supports.
A simple case to hold your TrueRC Stubbies when not connected to your goggles. Printed in TPU, no support needed. You may want to add some extra walls if the fit is too loose for your taste, but I printed it with 2 perimeters and it works…
TrueRC X-air Shell Category: R/C Vehicles
A customer wanted one of my reciprocators for his Swift Sixteen machine. He took all the appropriate measurements of the machine so that I could adjust my design to suit that machine. Photo and video of the reciprocator on a Swift Sixteen…
Il suffit de glisser la pièce dans la fente du masque.
TrueRC Singularity Low Profile Mount for the Demibot. This was designed around these antennas: https://pyrodrone.com/products/truerc-singularity-5-8ghz-u-fl-lite-lhcp-112mm?_pos=1&_sid=2c9e85678&_ss=r This design is to keep the antennas…
Even though the WifiLink VRX strongly resembles the HDZero VRX and has similar looking rails, it appears to be a different size. This mount slides onto the WifiLink front rails, holds the TrueRC X-Air. Print vertically with a brim, no…
I have always disliked how the standard mount for the TrueRC patch antennas created essentially a kink in the coax cables. I also hated how that design forced the 90 degree SMA connectors to push the front of the connector (the most…
While upgrading the antennas on the GoFilm20 with TrueRC Singularity antennas i needed to make something that would hold them in place a bit better so they don't flop over. I created this small brace intended to surround the antenna cable…
Hi! Here is a dual antenna mount for TrueRC Core 5.8 antennas (optimised for 85mm antennas), to be installed on JeNo 5,1 frame. Print int TPU without support, 20% infill or more. 💡 For full versions, optimized models and more options 👉…
The top of my TrueRC Singularity came off quite easily in a crash, so I made this to replace the existing cap. This can be used on a new one to add additional crash protection. This must be printed in TPU. Print Settings Printer Brand:…
Mejor impresión al 100% de Relleno y en Tpu.
I’m sharing with you my 3D model for the Parallax Speedster Pro drone frame, which doesn’t exist on the official print page (https://www.printables.com/model/1081562-parallax-speedster-pro-tpu-kit). I have modeled: -a camera mount for the…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
turns the antenna cable so that it comes out the top and goes to the top right sma so that it the goggle has better analog perfomance
Antenna Case for TrueRC Singularity 5.8GHz - SMA 120mm Needed Parts: 8x magnets with a hight of 4.5mm and a diameter of 3mm.
I wanted a way to visualize and test antenna mounting without paying for the $20 antenna and realizing I mucked up my measurements. Designed to fit a piece of 1.75mm filament to roughly match the coax wire for positioning sake. I liked a…
I didn't like the ones I could find on the internet to fix the patches to the rail on the VRX4 because I didn't like using double sided tape. I printed it in some tough TPU and for my setup the tolerances where perfect.
The double sided tape that came with the original 3D print was not sticking. This work better imo. printed it in PLA
print in in abs with out support
Voici tout les TPU de mon drone JeNo 3". Conception entièrement maison sur la base des plans officiels. Attention, le support d'antenne est très spécifique à la trueRC singularity MMCX angled et je garantie pas l'alignement avec un autre…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
A case for TrueRC X-Air antennas. Fits inside a standard Fatshark goggles case.
This design will allow users of HDZERO goggles with X-Air antennas to quickly mount and dismount a Walksnail VRX without interfering with, or removing, existing antennas. The Walksnail VRX mount simply slides onto the sprung pegs on the…
i found that some spools with the extra sized hole rub on the small gear wheel so i added 5mm extra clearance. the other one is to stop larger spools slidding through. and the circle thing is to reduce the size of the hole in the spool…
made these for the xairs im not sure how the x2airs fit so i left a couple of options if you dont want to print with supports, Ryan Quellet made a test print and printed the ball connection in 2 parts. thanks ryan for testing it.…
A downstop for the RSM Slot car tyre truer to stop the machine backing-off during grinding. I printed mine in PETG, it requires no supports if you print it the way it's supplied.
RSM Truer Knob Cover fits straight over the original adjustment knob. The indexing on the knob cover will make it easier to make adjustments. When used with the downstop lock will improve the usability of your RSM Slot car tyre truer. I…
Printed in petg with supports 2 x 16 M2 screws for the hinge
AOS 5 TrueRC Singularity 72mm antenna mount. Made specifically for HDzero Freestyle VTX. The addition of this extra length to the original mount allows to place the extra slack of the antenna inside of the tube instead of having it all…
I needed to hide my mmcx to sma cable, protect my antenna and elevate akk Fx3 so i made this. Hope this can help someone. Elevator is 20x20mm. I use Ender 3 s1 Pro with Sunlu 90A Transparent TPU.
Made in 2 pieces that can be clicked together. If the horizontal spacer does not fit, try rotating it 45 degreed to lay diagonally on print bed.
![TrueRC Singularity Dual Mount [ AOS 3.5 Evo ]](https://media.printables.com/media/prints/663860/images/5227714_94f66649-2502-424c-a2a5-5accd57e444b_dfe05f95-6035-4e85-83a4-f60f0dbf0957/dsc05463.jpg)
![TrueRC Singularity Dual LoPro Mount [Demibot]](https://media.printables.com/media/prints/418328/images/3469567_81695a7f-24b8-4588-a744-8bd98b7dba22/screenshot-2023-03-08-042050.png)
