Liczymy pasujące modele…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
A collection of all the modular lightsaber parts from my first five build your own lightsaber models including parts from Obi-Wan Kenobi's, Qui-Gon Jinn's, and Luke Skywalker's V2 Lightsabers along with parts from three custom sabers and…
When I found out about the awesome Dummy 13 designed by soozafone, I had to print one or two and then I realised they NEEDED a Lighsaber. Used the staff from the original to make it. This is at 200% so you'll need to scale down for the…
Introduction This is a no-glue-required build. The parts are threaded to make for easy assembly. Perfect as a gift or to make a fine addition to your collection. Parts list 1x Pommel 1x Hexacore Diatium Power Cells 3x Palladium Vortex…
3DCREATION This is a remix of Satsana fun duct optimized for use with stock fans. UPDATE --> VERSION v2 WITH MORE SPACE FOR X ENDSTOP Main benefits of this model: no need for support easy to print weight 60 grams ready for…
Here is my new Darth Vader lightsaber design. This specific style is inspired by the 'Empire Strikes Back' version of the prop. Use supports for the Lower Knob and Clamp Section. There is a version of the upright grips with a tear-away…
This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…
Update October 22 2022 - Added a whole version of the grip for anyone who wanted it. Here is my Luke Skywalker lightsaber featuring a slide-open control box to reveal the internal circuitry as featured in a deleted scene from Return of…
This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
UPDATE 2022.07.27.: This model is the Ep. IV version as the original prop looked in 1977. Recently I've designed a new one based on the 2022 Disney+ Mini Series prop. You can check it here:…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly CaseStudyno8 . Also from Dogbert's emitter remix and timmy_d3's remix . It has…
A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…
This version of the Darth Maul’s Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how…
Here is my version of Ahsoka Tano's lightsabers from her live action debut in Star Wars The Mandalorian. These were based on reference photos of behind the scenes props and screen captures. The colors are interesting--the offhand body is…
The iconic lightsaber used throughout the Star Wars film series. Photos show the prop after filling, sanding, and painting. The files contain versions from A New Hope, Empire Strikes Back, and Rise of Skywalker. We made a video covering…
What is this? mini Satsana is a remixed version of the very popular Satsana fan duct, which aims to reduce unnecessary weight and size. No supports are required, and there's clearance for the Micro Swiss Direct Drive kit. Print settings…
Might need a bit of sanding. Infill: 100% Supports: Yes
Here is my newly redesigned split model of the Obi-Wan saber from the first 2 Star Wars prequels. This was created using calipers on a metal replica to achieve more accurate dimensions. Only parts that require supports are the Lower Grip…
Happy to present my Count Dooku lightsaber design. Everything printed out ok and fit well but there were a few parts where the overhangs were just too steep for silk PLA to handle so I split those parts in half to print better and they…
Learn Guide https://learn.adafruit.com/lightsaber-rp2040/ Adafruit RP2040 PropMaker Feather https://www.adafruit.com/product/5768 RG LED Button https://www.adafruit.com/product/3350 Mini Skinny NeoPixel Strip…
At first I was just thinking that it would be cool to have a combination between Luke Skywalker's and Obi-Wan Kenobi's lightsabers, but it quickly spread to containing pieces from various other lightsabers and a few custom parts as well.…
This version of the Rey’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the on/off…
Printed this on a Sovol SV06 without too many issues. I had stringing between the blade segments so watch out for that. This would be pretty easy to modify for print-in-place, but I wanted to print the blade in a different color. The…
This is a slightly bigger than usual Lego style lightsaber. I built it as an accessory for an oversized Darth Vader figure. Designed to fit a Ledlenser K2 torch in the base to light up the blade. How bright the blade is depends a little…
Here's yet another fan duct for the Ender 3. The goal of this was to design something simple, clean, and solid that works with the stock fans and hardware and can be printed without supports as long as your printer can handle a 16 mm…
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
Title says it all. I've optimized the size for the bed of the Prusa Mk3. As it was too big at first, I made it modular for printing at the maximum size. I've also included a smaller one that can be printed in one go. The legs and body are…
Lightsaber stand inspired by the fallen order workbench mat and katana display stands. Prints in a few parts, can glue the hilt holder to the baseplate with the connecting tabs. If you want to support me or get commercial licenses you can…
UPDATE! This model's license has been updated to Public Domain, and now allows for sale with zero royalties. I do not own any rights or licenses to Star Wars intellectual property, so sell at your own risk. --- This pool noodle lightsaber…
Here is my own design of the ornate lightsaber wielded by Mace Windu in the Star Wars saga. I modeled it based on this set of photos of a copy the actual prop created by the original prop makers. I tried to get it as close as I could, but…
This version of Yoda’s lightsaber prints in one piece except for the front guard which is printed separately and glued The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
Here is my Qui-Gon Jinn lightsaber design. I tried to get it as accurate as possible. ****There is a new version of this here that screws together requiring NO GLUE**** The shroud is the challenging part, so it may take some creativity to…
Happy to present my Darth Maul lightsaber kit. The goal was to break it up to avoid as many supported overhangs as possible for a cleaner look, and also wanted the two halves detachable. These are all the parts to complete 1 half of the…
This version of the Obi-Wan’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the buttons,…
A collapsing lightsaber, model Darth Maul, based on @3DPrintingWorld original idea. The hilt is designed from scratch, but the blade can be re-used. Designed using FreeCAD, the project file as well as my own FreeCAD template are included.…
DISCLAMER This is a non-commercial model for personal fun made for serious Star Wars fans by a serious Star Wars fan. I've shared them for free as a way of giving back to the 3D printing community. Plese Do not sell either the files or…
This is a modified remix of the Satsana Fan Shroud/Duct by eric-anastas for the Ender 3 Pro. This shroud is modified to fit with the Creality CR-Touch touch sensor, using the standard hardware that comes with it. Printing: Take note of…
This is a fun gift to print for Star Wars and Lego lovers! Print Setting: Hilit - no support, 10%-15% infill Cap - no support, 10%-15% infill Blades - use “vase mode” or in cura “spiralize outer contour (smooth)”
Collapsing Sith Lightsaber Dual Extrusion Same as my original lightsaber but designed for dual extrusion. Detailed printing instructions can be found on my website . Printed on the Mudlex rep-rap IDEX printer. Single extrusion version:…
This version of the Qui-Gon’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the button,…
Let me introduce you to my minimal-assembly collapsible lightsaber with a lever lock. Not including the blades, the hilt only uses 3 parts! The blade is interchangeable to be any color you like, and you can add the dual lightsaber mods to…
1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny ! I design all handles based on the real ones you…
Remix of Inertpyro' awesome aperture door ( https://www.thingiverse.com/thing:529661 ), combined with AcE_Krystal' genius servo driven open/close function to fit 120mm fans in Ikea Platsa enclosure. Or any other 18mm (3/4") thick plates.…
Update September 11 2022 - Changed the braces to be less noticeable and made the connectors square for better printing and to keep them level. The legs were updated to fit the square pegs. Added size indicators on the parts for…
This lightsaber stand uses a single base frame with interchangeable attachments for different lightsabers. The included brackets fits all of my lightsabers. The top bracket stays the same but the there are two sizes for the bottom, a…
Here is a Revenge of the Sith version of the fantastic Yoda's lightsaber designed by CaseStudyno8 . It changed a bit by Episode III so tried to capture those details here. The files should open in the orientation they were printed in. Use…
Collapsible Sword/Lightsaber inspired by 3D printing world, i made the model from scratch in fusion360 to be able to customize the size. inserts are separated and able to be printed in another colour also included a model with no outer…
Remix to hold a piece of 1.75mm filament as the lightsaber. The original piece was very big to be considered a "mini". This height of my model is 7cm. I advice not to shrink it further down (or enlarge it a lot) if you want to use the…
I've recently finished my screen accurate Graflex lightsaber project. This is one of the two display stands that I designed for the lightsaber. It has a daring kind of organic design with the symbol of the Jedi order on its bottom. It was…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree Supports on build plate only Partially…
New and improved customizable lightsaber! Pick and choose any combination of parts to screw together and create your very own lightsaber hilt! There are over 10,000 combinations! Some of these parts are inspired by the extended Star Wars…
This is my attempt at Jaro Tapal's Lightsabers from Jedi: Fallen Order. If you want a double lightsaber print two of the saber emitter and two of the saber hilt as well as a connecter piece. If you want the broken saber just print one of…
This is a Collapsible Lightsaber that is SUPER fun to play with and show your friends. I used Fusion 360 to design this and Any cubic Slicer for printing. I also used the Any cubic Kobra 2 Neo to print this fun sword! If you enjoy my…
This version of Mace Windu’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions…
Horizontal version of Daniel Josvai's tilted display stand for lightsaber hilt at https://www.printables.com/model/15505-tilted-display-stand-for-lightsaber-hilt . The attached photo shows the horizontal stand with Josvai's Obi-Wan Kenobi…
This is my 2nd version in the 5th update For Mounting: Push the nozzle onto the bed Screw the screws into the duct beforehand Push the cable out of the hotend into the housing and place the duct for the screw holes Place the spanner under…
This keychain is a replica of Obi-Wan Kenobi's lightsaber.
Loved the original pool noodle handle by Cosmeeto but wanted to add some variety to it for my kiddos and their friends. May the force be with you. See the Sith Model Here
EINZIEHBARER LICHTSCHWERT-SCHLÜSSELANHÄNGER EINFACHE MONTAGE! UNTERSEITE DES GRIFFS KANN ABGESCHRAUBT WERDEN, damit die Klinge entfernt und ausgetauscht werden kann. SCHLÜSSELANHÄNGERRING erforderlich Printed on Prusa mini Settings: 0.15…
Second Attempt with some Changes now. !!Work is still in progress. Materials list and files are not complete at the moment!! waiting for my second anti vibration mat and a new (smaller) stone for the Mini. All work will be continued here…
This version of the Darth Sidious’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
LEGO Light saber inspired 12oz can coozie to keep your beverages cools during all your Star Wars celebrations. Designed to print without supports. Examples were printed at 0.2 layer height with 3 perimeters and 15%-20% lightening infill.…
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
Thanks to many many sources this set should be compatible with real parts from Savi's Workshop, though you don't need a Savi's hilt to use any of these parts. For the core the hilt you have four options with this kit. Option 1) If you…
K2 Satsana Dual Fan Duct for the Ender 3 v2 with CRTouch/BLTouch. It utilizes the STOCK FANS, and a mount/duct for a second 4010 parts blower fan. After a few months of off and on development and design testing, I feel this is ready for…
I wanted to create a new display stand for my 2022 Kenobi lightsaber model and came up with this design. It's simple yet elegant in a Feng Shui-ish way. The three parts can be printed without support and snap together (however a bit of…
I printed several lightsabers from 3D printing world and the children had a lot of fun with them for two days until they were unfortunately both broken :(. That's why I did the work (way too much xD) and developed a version of this old…
This version of the lightsaber is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
UPDATE 2025-05-26 : Added “100mm-tube-connection”, to be used with https://www.printables.com/model/1337372 for ducting to IKEA UPPÅTVIND! UPDATE 2023-01-09 : Added the possibility to use a filter on the inside of the cabinet…
Big Lego lightsaber
This is a new totally redesigned version of my popular Satsana fan duct for the Ender 3 and other compatible printers. See my previous designs here: Satsana Ender 3 Fan Duct Satsana 5015 Fan Duct for Ender 3 / Ender 5 / CR-10 Dual 5015…
This the new and improved version of my previous Kanan Jarrus lightsaber that can still be found here: https://www.printables.com/model/691869-kanan-jarrus-lightsaber-with-quick-detach-emitter So what changed? I wasn't happy with the size…
It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Tree Supports on build plate only. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree…
Cal Kestis/Jaro Tapal parts for your Savi's Workshop lightsaber. You need a round 3mm x 2mm magnet for the interior switch plate. Category: Props
Wanted a barely visible way to mount my Savi's lightsaber to the wall. Will fit securely around the right "rings" on the hilt (see picture to position correctly. Basically, if you used the same pommel and the same upper guard as me,…
This is a digital 3D printable model of a custom holder/stand and wall mount that is suited for our collection of Star Wars Lightsabers. We studied the aesthetics of individual objects from Star Wars and created this simple but efficient…
A collapsing lightsaber, model Mace Windu, based on 3DPRINTINGWORLD's original idea. The hilt is designed from scratch, but the blade can be re-used. Designed using FreeCAD, the project file as well as my own FreeCAD template are…
UPDATED!!! see the update log below (Thank you ydkjman S!) Another (re)mix of CaseStudyno8s (https://www.thingiverse.com/thing:1598042) and 3DPRINTINGWORLD (https://www.thingiverse.com/thing:3606120)s designs to create my own Kylo Ren's…
Little remix of 3D printing world's collapsible light saber. Original model files are here: https://www.prusaprinters.org/prints/3721-collapsing-lightsaber-removable-blade I modified the end cap model to have a V-ring, more true to the…
An easy to print Lightsaber Pen that uses a standard bic cartridge
Now we have Darth Vader's lightsaber, this is a bit more designed after his hilt in episodes 4 and 5, the most noticeable difference in his RotJ hilt is the emitter shroud, so I included an extra piece designed after his RotJ shroud if…
Collapsible Lightsaber Blade that can be printed in vase mode, extends to 110 cm, and can be used with hilts such as this or this . Print each segment of the blade separately, and easily assemble. Read more at…
Here's a new glue-free version of my Qui-Gon lightsaber. The modular parts can be swapped out if broken or simply to change the colors. It's an easy assembly and much better than using messy glue. Model notes Shroud: Requires supports but…
A simple spool holder to fit the Ikea PLATSA closet. My previous design had a filament guide to it, but for the sake of reusability and flexibility, I found it better to make that into a separate part . Spool requirements: Minimal inner…
Here is my Boba Fresh/Re Armoured/Post Sarlacc Helmet. It's designed on the Side show helmet with the smaller turn signals. It is sized quite small at 100% so i'd suggest going to 103-105 for a normal sized head and 108 for larger sized…
12/1/22-Updated to v3. Only a slight change. Fixed the small holes that was found by user Jason Wu. 4/19/22-Updated the model to v2. This version has more clearance between the hot end and the shroud. This was printed in PLA+; I have had…
The second lightsaber wielded Jedi Knight Anakin Skywalker during the time of The Clone Wars when he fell to the dark side. This is Anakin's lightsaber as it is seen in Episode III: Revenge of the Sith. The parts in the folders are parts…
This was a fun one for me. I started out by downloading UnimatrixRed’s model. Right as I was getting ready to start printing, I thought – I'll thread it (because I hate glue). That is the remix that never saw the light of day.... because…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I've redone my filament guide to only require a single PC4-M10 coupler. While also making insertion of filament more convenient. For the utmost convenience when inserting filament, use a countersink drill bit on the end of your PTFE-tube.…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Tree Supports on build plate only. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree…
I've recently finished my screen accurate Graflex lightsaber project. This is one of the two display stands that I designed for the lightsaber. It has a traditional horizontal build with a structure inspired by the grips on the side of…
I modified the arm for the BL Touch to match up with the cable for a CR Touch and removed the access hole for changing the BL Touch probe since the CR Touch does not have a replaceable probe. I am using this on an Ender 3 v2. I suggest…
Customizable Jedi Lightsaber Holder can be used to mount a Disney lightsaber to any wall! Looks great, I got away with printing at 25% infill with PLA, but I wouldn't go lower than that!
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
