Liczymy pasujące modele…
Sítko / Krytka pro SLO přepad (Akvaponie & Akvaristika) Ochranné sítko navržené pro SLO přepad (Solids Lifting Overflow) v akvaponických a akvarijních systémech. Zabraňuje nasátí ryb, větších nečistot nebo pěstebního média do přepadového…
Background I loved the idea of the aquapurr cat fountain as you do not have to clean it and the water never runs out and is always fresh. But it was a bit of a journey to get my cats to use it so I wanted to share the solution that…
Altered the original model to make the AP point downwards at 15 degree angle. Also altered the holes to use M3 heatset inserts. Printed in white PETG (Sunlu)
Support pour plante aquaponie avec attache pour les mettre ensemble. Diamètre du trou 39.6mm, avec rondelle pour surélever la plante. Avec support pour bac a plante de 230mm pour protéger les racines Impression en PETG Support for…
-PETG -No supporrts -%80 infill 2022, MN
Celebrate your enthusiasm of UAPs UFOs with this custom designed wall art piece. It highlights three current shapes of reported UAPs UFOs - the Tic Tac, Triangle, and the Cube in Sphere. I designed this so you can proudly display it on…
recipiente para colocar encima de acuario con plantas, con una bomba impulsar agua del acuario, las plantas filtran.
This is a horizontal holder for the Ubiquiti UniFi Unifi UAP-HD-IW so it can be used as a desktop switch and access point instead of wall mounting and gives you: easy access to the 4 x Network ports non slip feet (if you use the o-rings,…
Protect and Preserve Your Ubiquity UniFi UAP-AC-M Antennas Frustrated by broken or worn UAP-AC-M antennas? Ubiquiti doesn’t offer replacement parts, but now you have a solution - the UniFi UAP-AC-M Antenna Protector! This protective cover…
This mounting bracket enables installing a UAP-Flex onto any 90-degree corner. The holes where the Unifi-provided mount attaches to the 3D-printed mount were sized to allow for the provided screws to be self-tapped. Enjoy! P.S: Sorry…
Ubiquiti UniFi mount for UAP-AC Access point. I needed something to connect right under the celling and my stairs. It's mounted on the pole as shown in picture held by 2x4mm zip-ties. To attach to bracket you need 1xM4 nut and 1x M4x40mm…
This is a protector - stand for Aquaphor Glass filter Jug. The jug is very handy and im my opinion much more pleasent to use than plastic ones from Aquaphor but it has no protection on the bottom. I found it very disturbing and stressful…
Broke the original clip and designed a replacement. The tab is a bit bigger and easier to open and close. I printed in PLA but can print in more durable materials.
This is a simple 11.5"x1.5" aquaponic growing basket, perfect for beginners or someone who just wants a simple tray to hold their plants on the top of the aquarium. Prints in one piece and has a living hinge. Once print is done, simply…
I made these as speaker grills for my Virtual Pinball machine with a Virtuapin DYI panel that holds 4" speakers and a 15.6" LCD screen. They friction mount in and I held them in place with a touch of hot glue on the back.
Mein erster Versuch eines Pflanztopfs für vertikale Glasscheiben um kleine Pflanzen im Aquarium zu befestigen. Optional kann man Tonkugeln einfüllen. Empfehle 10% infill, auf dem Kopf stehend drucken und organic supports für die…
I was having trouble with overheating APs so I created this remix to help with airflow around the AP. It is a mounting plate for unifi APs with standoffs so that the AP does not mount flush with ceiling or wall. The locking tab also has a…
ATTENTION: Needs to be flipped base plate down for printing. Mounting Plate to secure Unifi AP directrly to 4x2 Electrical Boxes for Ubiquiti Unifi UAP-AC-LR UAP-AC-LITE UAP-nanoHD Should be compatible with common US and Brazilian 4x2…
This model turns a small ~5gal fish tank into a vertical aquaponics garden. Intended to be used to grow small herbs and lettuce. Lighting profiles and pump timing can be programmed through the Arduino UNO Currently the lighting and pump…
Cpap toolhead inspired by @DK on discord using the fibersteam x carriage or my custom sheetmetal sandwich x carriage, goliath hotend, beacon rev H and bmg extruder with a smooth bearing idler. Smooth idler and front bmg bearings are…
Víčko na truhlíky aquaponie. Pro zabránění padání nečistot do systému. Ø 48 mm - prstenec do truhlíku
Cpap toolhead inspired by @DK on discord using the fibersteam x carriage or my custom sheetmetal sandwich x carriage, goliath hotend, beacon rev H and bmg extruder with a smooth bearing idler. Smooth idler and front bmg bearings are…
The big water lock of the AquaPlay lost in the kindergarten. I have printed a replacement part. I suggest to use PETG or other UV resistant filament. My other related model:
Printing ASA or PETG for durability and UV resistance My first ASA print ever was the lid, it warped a bit, but actually still worked for me and prevented me from actually having to use the M4 bolts to secure it closed. Turned off the…
V6 has washers and lock washers on almost every bolt to reduce the effect of material creep and a PC4-M5 pneumatic fitting (ali supplier doesn't carry them anymore, good luck). Versions for an fdm printed x carriage with the monolith slm…
This is a custom-designed replacement drain plug for the AquaPlay water canal toy system, created after the original part was lost. It is a fully 3D-printable, three-part design that assembles without any metal parts, glue, or tools —just…
I use those magnetic fire-alarm ceiliing holders, but they don't stick to the holding plate of the Ubituiti access point. With this adapter, you can put any 60mm magnetic plate into it and then use screws to attach the mount adapter.…
Use 4 M3 screws For Unifi UAP-AC-LR NOT FOR Ubiquiti UniFi AP AC Pro
model i created becuse ro filters have slow flow and i dont have patience to hold the glass for that long and i would put the glas down while filling and forget until it overflows. This way its above the sink and if it overflows it dosent…
Honeycomb Storage Wall intermediate Mount Plate for Ubiquiti UAP-AC-LITE. This requires some M4 machine screws and nuts to attach to the original mount plate. If you only have M3 i'm sure it would work just fine. I assume this will work…
Aquaponický stojan řízený mikro:bitem Pro montáž aquaponického stojanu se třemi patry je potřeba vytisknout tyto stl soubory: Podstavec aquastojanu (1) (1x) Spodní díl aquastojanu (2) (1x) - Tento díl je třeba přilepit k Podstavci…
Here are two, quick attach, hook-on style mounts for the Unifi Access Point (UAP) nanoHD or U6-Plus. With the forward mount, the UAP is held in normal orientation, the "U" logo and LED status light are visible. It also adds 3 mm underside…
This is a simple stand designed to add height and stability to the AquaPurr cat water fountain. I found that the water line (and the cats) made the fountain prone to tipping, which then spilled water everywhere. This stand widens the base…
Replacement handle for a small shut‑off valve used in drinking‑water filtration systems. Designed as a replacement for a broken handle on valves similar to those commonly installed in under‑sink filter setups (e.g., Aquaphor, etc.).…
Background I loved the idea of the aquapurr cat fountain as you do not have to clean it and the water never runs out and is always fresh. But it was a bit of a journey to get my cats to use it so I wanted to share the solution that…
Smolboi's UAP Toolhead for Monolith with ECAS! This version is specific to Goliath / CHC_XL Hotends, with the CHC XL you will have to remove the MZE for this to work correctly otherwise the hotend tip is too far from the Beacon /…
Smolboi's UAP Toolhead for Monolith with ECAS! This version is specific to Rapido2 UHF / Dragon UHF Hotends, This toolhead is designed for running toolhead wires to the MCU.... !!! NOT FOR USE WITH TOOLHEAD BOARDS !!! Additional info:…
If you use Aquaponics to grow stuff like Micro greens, the nutrient rich water contains lots of solids (Fish poo). This can be despite many levels of previous filtering. Plants of any kind can't consume these solids, so these naturally…
This is a mount for mounting Ubiquiti's Unifi AP Pro to a 10" mini rack by modeling the included bracket and merging it with a rack mount. Includes a keystone cutout for running cables through the face plate. It probably will work with…
B15 Water Purification Cartridge. Aquaphor Pitcher.
A simple stand for a UAP AC Lite or a Nano HD since both use the small mounting bracket. Print instructions Print it laying on its side.
A Bell Siphon allows for the continuous filling and draining of a container even with a constant water inflow. It is commonly used in aquaponic systems to create an "ebb and flow" cycle. This ensures that plants receive a regular supply…
Altered the original model to make the AP point downwards at 15 degree angle. Also altered the holes to use M3 heatset inserts. Printed in white PETG (Sunlu)
Support pour plante aquaponie avec attache pour les mettre ensemble. Diamètre du trou 39.6mm, avec rondelle pour surélever la plante. Avec support pour bac a plante de 230mm pour protéger les racines Impression en PETG Support for…
I created this standoff as i wanted to cover my network socket at the ceiling. It is desgined for the UAP AC Lite and the WiFi 6 Lite , but should also work for all other Unifi APs with the same dimensions. Slice it with supports from the…
This is a planter for aquaponics and hydroponics at a small scale. The design consists of 3 pieces. The top is where the plant goes, the bottom has legs that suspend the plant above a waterlevel, and the aligner fits the top and bottom…
I added also the original Fusion file, so if needed it can be easier modified. The outer diameter is 200mm (7.874 inch). The diameter for the WiFi module is 48.9mm (1.925 inch)
The small water lock of the AquaPlay lost in the kindergarten. I have printed a replacement part. I suggest to use PETG or other UV resistant filament. My other related model:
Overview This is a simple desk model of Mount Ruapehu (a volcano in New Zealand). More information can be seen here: https://en.wikipedia.org/wiki/Mount_Ruapehu The mountain has a crater lake, and the lake seen in the northern end if part…
Aquaporins are membrane proteins that act as highly selective water channels, allowing water to move rapidly across biological membranes. In plants, they are essential for water balance and help cells respond to changing environmental…
Who ever disassembled these antennas knows it's a problem. So I created this practical gadget, it saves a lot of time and nerves :-). For remixing you can use TinkerCAD source: https://www.tinkercad.com/things/75DUwfTVZUt Print…
a filter designed to stop rocks and sticks from going into our pond drain tube slips over a one-inch pipe I printed this in resin cause of the many holes but you may people able to do it on an FDM printer
This is a remake from the Ubiquiti UAP-AC-Pro Horizontal Wall Mount to support the Ubiqui UAP-AC-LR model, you will only have to drill your holes in the platform based on the original wall mount, I left this without holes so you could…
f you are interested in creating a cheap DIY planter for various reasons (my need was for a homemade aquaponics system), you can use a combination of the plastic downspout found in this link along with this 3d design to function as a cap…
This design is a remix of the original collector cone piece from the Modular Hydroponic Tower Garden by boundarycondition. It allows the tower to be separate from the rest of the system. It uses M5 bolts to attach it to a base. Print…
The contour of the stands fits the profile of the salt cell to allow for a sturdy support while cleaning the cell.
Remember...remember us... Remember...that we once lived... Immortalized in ornament form for the holiday season are the square grapes from critically acclaimed MMORPG Final Fantasy XIV. With an expanded free trial which you can play…
This is a remix off Unifi UAP-AC-M antenna block by krok.
I designed these as a way to start seedlings on the Beaver Plastics lettuce floats with ~1" openings. Any rafts with 1" holes will work. It also works well in 2" tubes with 1" holes drilled in. If using a larger tube, the water collection…
Aquaponic planter rack for the Top Fin Indulge Easy Clean 3 gallon Aquarium Set on top of your TopFin 3 gallon aquarium and grow some plants! No support required
These end caps silicone onto vinyl fence posts sleeves to turn them into NFT gutters.
Aquaponic planter rack for the Top Fin Indulge Easy Clean 3 gallon Aquarium Set on top of your TopFin 3 gallon aquarium and grow some plants! Support required for the net pot.
I have a 20 gallon fish tank and I wanted to create an aquaponic system to utilize the nitrate rich water the fish create for a variety of plants. We started feeding water to the house plants whenever we did our weekly water changes. The…
4 tier hydroponic system, with built in bell siphon system in each partition. Centre based water distribution.
If you have kids with eczema you probably have this stuff in the med cabinet. A little bit goes a long way but the kids eventually drop it and the lid breaks, so make yourself a new lid on the cheap..
Simple building block to make it easier to build awesome natural landscapes for Aquariums, Terrariums, Greenwall features or Microgreens. Anyone doing any of the above knows it's not trivial trying to sculpt landscapes with living plants…
Fitted a bell syphon into my aquaponics project and needed a guard to keep my media out of the syphon. This works well for expanded clay pellets, and similar. Lots of holes to keep the water flowing. Had this fitted to my system for over…
Bell syphon I made for an aquaponics system. This is the outer bell, with a hole in the top to insert some aquarium air line tubing to help break the syphon. I have added 3 STL's. One is the entire thing (not sure how well this will work…
The model shown here has been remixed from the excellent "Ubiquiti Unifi AP Mount" made by "ThePhilStrongProject" on Thingiverse. This version of their model is made specifically to fit the Ubiquity UNIFI Access Point model “UAP-PRO”. I…
Das ist ein Case für die Montage einer Ubiquiti UniFi IN-WALL - UAP-AC-IW Damit kann die UAP-AC-IW einfach an die Wand geschraubt werden und das Netzwerk Kabel nach unten herausgelegt werden. Habe für die Montage wieder M3 Gewindeeinsatz…
This is an old DACIA logo, mostly first and i wanted to recreate it for anyone who wants it!
One piece or clamshell style cover for the Ubiquiti Unifi AC Mesh Professional UAP-AC-M-PRO. The cover is mostly intended to change the color of the device, it is often mounted outside on buildings and the white access point can be very…
Antenna guard for Ubiquiti UniFi UAP-AC-M. Locks the antennas in the vertical position. I designed this so that birds would'nt sit and fold the antennas. A simple design for a simple problem. So far they have survived 3 years outside, so…
made this adapter plate to fit a ubiquiti UAP-AC-LITE be able to fit a low voltage box. Version 2 is fully centered around both the AP and low voltage box but requires an extra screw. I used 10-32 x 1/2" flat screws to mount the AP…
Garden nut for hose connector
this has a torus diameter of 2mm and a inner diameter of 15mm
Story: I bought a AquaPur ironing desk which occur to have plastic slippery foots on it, that would cause the board to bend quite bad during ironing. I got my first spool of TPU at that time so I decided to copy that foot and get my board…
Basic corner bracket for the Ubiquiti UAP-AC-M mesh outdoor access point. My thinking being if the radio is mounted on the corner of a property it essentially has 270deg FOV rather than just 180deg with flat surface mount. Bracket extends…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These are easy to lose and break. I lost mine, then found it again and used it as inspiration to design this replacement from scratch. This slides on and fits perfectly in my test print, just tight enough, and also the screw…
Not exactly a remix of that one but of this one https://www.thingiverse.com/thing:3405964 The box was printed in Marble PLA. Inside it you can fit the ESP32, a USB C Power Delivery Board and a LN298N Servo Controller. Basically it is a…
This stand is designed both raise the motion sensor and allow the cat to access the water from a sitting position. Print the two parts and optionally glue. You may move the velcro strips to the bottom of this model. https://aquapurr.com
A variety of components for adding a simple aquaponics setup to an aquarium, this was modeled for an Aqueon 72-gallon bow front but could probably be adjusted to a variety of aquariums. I've had success growing basil, lettuce, and…
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
-PETG -No supporrts -%80 infill 2022, MN
This is a bracket for an aquarium light that integrates the supports for an aquaponic system. The aquaponics are in a 4" (100mm) PVC pipe that sits above the aquarium, allowing the pump to fail-safe, and requiring minimal setup. The light…
Chtěl jsem svou akvaristiku posunout zas o krok dál. Taky jsem chtěl snížit periodu čištění akvária a taky si něco vypěstovat. Tak jsem zkusil aquaponii nad mým akvárkem a pohromadě to celé drží stojan, jehož tištěné komponenty zde…
A Wall mount backplate for the Ubiquiti Unifi InWall Blackplate UAP-AC-IW with the 2 ports
A tray with 30 small pots designed for starting garlic in water. I designed it to fit inside a small clear plastic container but this can work in anything that can hold water. Fill with water so its just touching the inside of the bottom…
I made this to fit in the hole of the top cover of my Eheim AquaPro 126 aquarium. The cover has a spot to put the Eheim AutoFeeder but it seems that one must buy also the Eheim feeding station to avoid the food ending up all aound the…
Celebrate your enthusiasm of UAPs UFOs with this custom designed wall art piece. It highlights three current shapes of reported UAPs UFOs - the Tic Tac, Triangle, and the Cube in Sphere. I designed this so you can proudly display it on…
Panier pour culture en aquaponie en aquarium. Modèle ici en 5cm de hauteur, différents crochets suivant les épaisseurs de vitres disponible sur ma page. Les clips de fixations et crochets pour la suspension à la vitre sont commun aux…
![Pond/Aquaponics debris filter for large to small debris [Fits over one inch pipe]](https://media.printables.com/media/prints/198141/images/1831882_c9390d63-20f4-48a8-aa70-33b0e6deecdb/20220506_221036.jpg)
