P
PrintablesKYZ Design
Under Desk Drawer with Double Travel Stops
Rails are designed for 6Gx20mm countersunk screws (or 4mm x 20mm)
- Pobrania
- 11 168
- Polubienia
- 4128
- Ocena
- 4,92
Wyniki wyszukiwania: ubl
Liczymy pasujące modele…
P
PrintablesMichal Fanta
SBox for MK2/3/4 - Double cantilever box
Support me & Buy a T-shirt The Cantilever box is compatible with SBox for MK2/3/4 - stackable toolbox system and is intended for printing on the Prusa MK4 size 3D printer. Assembly list of non-printed parts 16 pcs - metal axis 36( 35 )mm…
- Pobrania
- 10 811
- Polubienia
- 5170
- Ocena
- 4,92
P
PrintablesMake It Lab
Airless Basketball Models – Double Lattice – Bounces great!
Edit: added an STL model/3mf file for printing an airless basketball out of Yasin PEBA filament on 5/2/2025. These models/files are for making airless basketballs out of either the PEBA filament or the Ataraxia Art Flexible PLA (FPLA)…
- Pobrania
- 10 100
- Polubienia
- 950
- Ocena
- 4,6
P
PrintablesJam
Monster Energy can cup double sided remix
I created double sided version of Kyle Cup V5 as it suits me much better :). Remix of design: MandicReally https://thangs.com/MandicReally/Kyle-Cup-V5--NEW-DESIGN--Chad-Chalice--Stimulant-Stein--Monster-Energy-Drink-Can-Cup-17751…
- Pobrania
- 7201
- Polubienia
- 533
- Ocena
- 4,93
P
PrintablesTheSameNameTwice
Parametric Box v2 (double clasp)
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
- Pobrania
- 6820
- Polubienia
- 1168
- Ocena
- 4,85
P
Printables3DJourney
Perfect 1st layers! Ender 3 v2, Ender 3S1, Ender 3S1 Pro - 3x3 Calibration Bed Leveling Squares optimized for Professional firmware with UBL
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
- Pobrania
- 6316
- Polubienia
- 507
- Ocena
- 4,94
P
PrintablesSpradlinb
Minecraft Chest Single and Double
I needed somewhere to store my mini-Creeper and Anatomy army, so a Minecraft Chest seemed like the perfect solution. The two halves of the chest are connected by inserting a piece of 1.75mm filament into the back hinge. You can add a dab…
- Pobrania
- 6043
- Polubienia
- 2728
- Ocena
- 4,97
P
PrintablesNoodlemeister
LEGO Cup Drink Holder (double-wall insulated)
Life-size double-wall insulated LEGO cup! fits standard cans and keeps them cool! Uses a small wedge to keep the cans from falling out of the cup, and a small venthole in the bottom. Make sure to drop a follow and a like if you want to…
- Pobrania
- 5571
- Polubienia
- 1445
- Ocena
- 4,82
P
PrintablesTomasT
Christmas tree baubles
Multiple baubles to christmas tree (35 variants and sizes). Prepared for printing in vase/spiral mode - I recommended minimal 0,4 or 0,5 nozzle and set extrusion line width more than 100%. In some parts of baubles (overhangs) i use layer…
- Pobrania
- 5440
- Polubienia
- 1420
- Ocena
- 4,8
P
Printablesthird-dimension-labs
Double Key Switch Fidget Lanyard
We're back with a chonkier, more balanced, even more fun fidget! Designed to be compatible with Cherry MX style key switches. Just add two of those, some key caps, and a lanyard. It's recommended to use XDA form factor key caps, but…
- Pobrania
- 5127
- Polubienia
- 536
- Ocena
- 5
P
PrintablesThe Kit Card Guy
Boost your multicolor prints! Central filament sensor mount with filament clips for single / double spool configuration for Elegoo Neptune 3 / 4 Pro Plus Max
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
- Pobrania
- 5012
- Polubienia
- 719
- Ocena
- 4,77
P
PrintablesPrecision 3-D
Dummy 13 double Katana Holster
Infill, 20% a new version https://www.printables.com/model/752394-dummy-13-katana-holster-v2 holster v1 and v2 require minimal support V3 requires no supports
- Pobrania
- 4840
- Polubienia
- 752
- Ocena
- 4,79
P
PrintablesNyfe
Fidget Key MX (Single/Double/WASD)
I like fidget toys and mechanical keyboards. So I created a little case for single/double/WASD switches and keycaps to click around. Mine is printed with 0.15mm layer height and 30% infill. But 0.2mm and a lower infill should also work…
- Pobrania
- 4835
- Polubienia
- 395
- Ocena
- 4,92
P
Printables3DPrintBunny
Snowflake Christmas Bauble
Simple snowflake Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page…
- Pobrania
- 4767
- Polubienia
- 1264
- Ocena
- 4,92
P
Printables3DPrintBunny
Christmas Bauble display tree
Christmas bauble display stand. UPDATE - I have redesigned the tree and base so that they slot together better Easy and quick to print with no supports Pictured with a 6cm bauble but can easily be scaled up or down. Let me know in the…
- Pobrania
- 4575
- Polubienia
- 669
- Ocena
- 4,88
P
PrintablesFestool
Festool Double guide rail holder
Festool Double guide rail holder - simplify your tool management Where do you currently store your guide rails? Print your own Festool double guide rail holder and make your everyday work easier and more productive. Don't have a guide…
- Pobrania
- 4499
- Polubienia
- 456
- Ocena
- 5
P
PrintablesSTORM DESIGN
Bambu Lab Scraper - Double Sided Logo
Hello Everyone I am sharing two versions of the modified Bambu Lab Scraper. I was annoyed with the original version because the Logo was placed on the wrong side. It should be visible when using Scraper. In addition, the project contained…
- Pobrania
- 4263
- Polubienia
- 430
- Ocena
- 4,8
P
PrintablesDeltaprints
Ribbed Double Toothbrush Holder Set, Organizer
A great ribbed set consisting of two toothbrush cups and a matching base in which both can be placed. Creates some order in the bathroom. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
- Pobrania
- 4083
- Polubienia
- 829
- Ocena
- 4,88
P
PrintablesCadeyzDad
Double Stack Race Mag Pouch fits Glck Canik M&P CZ Sig Taurus USP9 Colt 2011
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
- Pobrania
- 3737
- Polubienia
- 612
- Ocena
- 4,95
P
PrintablesPro3Druk
Double Flute
Update: 09.07.2025- I want to let you know that anyone who wants to purchase my flute commercially can visit my patreon for more detailed information. There is a paid version of the double flute, which is decorated with embellishments and…
- Pobrania
- 3628
- Polubienia
- 401
- Ocena
- 4,88
P
Printables3DPrintSOS
PolyMaker PolyDryer - Double Barrel Mod
I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…
- Pobrania
- 3239
- Polubienia
- 639
- Ocena
- 4,91
P
PrintablesThoni
double row playing card holder
This is a play card holder for the little hands of my kids, that are not able to hold many cards. I designed it with two rows and enough space between them for easy grabbing of the front cards. Most holders with two rows are too tight in…
- Pobrania
- 3217
- Polubienia
- 425
- Ocena
- 4,98
P
Printablesfrmdbl
Openwork Christmas Bauble
Update 1# - I made the top cone have more support from below so it should print more easily, and reinforced the bottom fins. I modelled this in Blender. Print Settings It's printed with a 0.4 mm nozzle, 0.2 mm layer height and no…
- Pobrania
- 3111
- Polubienia
- 989
- Ocena
- 4,88
P
PrintablesEA3D
DC motor with 1:48 gear 3-6V with double sided shaft 200RPM
4-11-22 updated model with stl parts
- Pobrania
- 3089
- Polubienia
- 172
- Ocena
- 5
P
PrintablesMaxT
Santa Sleigh in a bauble (Christmas tree ornament)
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
- Pobrania
- 2971
- Polubienia
- 429
- Ocena
- 4,76
P
Printablesalobal
Double Cap/Hat Hook
Update: 07/05/24 For extra load capacity, I added backing plates that use either #6 or #8 screw. For those you want to hang helmets. ----------------------- Update: 04/23/24 I made adjustments to the inner fillets of the hook, hopefully…
- Pobrania
- 2969
- Polubienia
- 1180
- Ocena
- 4,91
P
PrintablesRJ Design
4 Bauble Set (Dotted, Spiral, Lattice, Plain/Fuzzy Skin)
The Design Here's a set of 4 stylish Baubles. They have a diameter of approximately 60mm Let me know if you experience any issues and i can try to help Printing Please make sure the print bed is clean as adhesion is very important.…
- Pobrania
- 2866
- Polubienia
- 741
- Ocena
- 4,94
P
Printables3rd Dimensional Printing
Double-Sided Grip Butterfly Knife Collection
This Butterfly Knife, aka Balisong, has grips on both sides for those who know their way around Butterfly Knives and Balisongs. I couldn't say it any better, so here's a quote: “This thing is wicked fun! It's not going to carve a…
- Pobrania
- 2818
- Polubienia
- 423
- Ocena
- 5
P
PrintablesAikano9
Double Layer Rugged Multipart Pinecil/TS100/TS80 Case (V2)
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
- Pobrania
- 2789
- Polubienia
- 539
- Ocena
- 5
P
Printablesandyroo770
Christmas Bauble
Print 0.16mm, might need supports or maximise cooling fan.
- Pobrania
- 2722
- Polubienia
- 514
- Ocena
- 4,92
P
PrintablesGalactic Armory
Republic Commando Miniature
3D Files for a 1:12 and 1:48 scale version of a Republic Commando! This is 1 pose of a 10 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
- Pobrania
- 2625
- Polubienia
- 552
- Ocena
- 5
P
PrintablesLoboCNC
Double-Barrel Gatling Disc Shooter
My 8-shot re-mix of Uhltimate's Disc Shooter, was fun, but why shoot 8 discs when you can shoot 40. Really fast. This double-barrel version of the shooter is crank driven, able to fire up to 8 discs per second. It uses the same basic…
- Pobrania
- 2608
- Polubienia
- 1020
- Ocena
- 4,92
P
Printablesmeie1kyl
Double 2.5 to 3.5 SSD HDD bay adapter
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
- Pobrania
- 2599
- Polubienia
- 268
- Ocena
- 4,85
P
PrintablesMaxT
Christmas Deer and Christmas Trees in a bauble (Christmas tree ornament)
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
- Pobrania
- 2580
- Polubienia
- 364
- Ocena
- 4,95
P
PrintablesTvorim3D
Angel - christmas tree bauble and keychain / Vánoční andělíček
If you want to use it as a keychain, print it in its original size. As a decoration for the Christmas tree, it will be appropriate to enlarge the model to at least 130% (in the X and Y axes). No special print settings are required. Happy…
- Pobrania
- 2506
- Polubienia
- 294
- Ocena
- 5
P
PrintablesShirley Productions
Libra Double Barrel airsoft 40mm shotgun/grenade launcher
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
- Pobrania
- 2483
- Polubienia
- 631
- Ocena
- 4,86
P
PrintablesSpatula
Honeycomb 3M Command Strip Mount + Wall Double Hollow Insert
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
- Pobrania
- 2396
- Polubienia
- 601
- Ocena
- 5
P
PrintablesFemlingDesign
Stagecoach Side By Side Double Barrel Dart Blaster
Changelog: 11/03/2025 - Fixed priming bars missing from part drawings pdf. Changelog: 02/21/2026 - Added hw kit suppliers for asia What is this? The Stagecoach Side By Side is a 3D printed nerf blaster that fires and ejects Sillyshells ,…
- Pobrania
- 2377
- Polubienia
- 1232
- Ocena
- 5
P
PrintablesBrad @ FTBT 3D
Double Glue Stick Holder - HSW
Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm…
- Pobrania
- 2367
- Polubienia
- 431
- Ocena
- 4,85
P
Printables3DPrintBunny
Large Christmas Bauble and Display Tree
An intricate Christmas bauble and a bigger version of my Christmas bauble display tree to hang it on. Prints without supports and the bauble and the tree slot together without the need for glue. @3DPrintBunny
- Pobrania
- 2366
- Polubienia
- 344
- Ocena
- 4,88
P
Printablesdarko.straus
Lego Technic compatible double helical gears
Lego Technic complatible double helical (herringbone) gears. The dimension axle hole for the gears were taken from the Lego Technic compatible gears with custom sizes with axle holes able to slide along the axels.
- Pobrania
- 2275
- Polubienia
- 325
- Ocena
- 4,71
P
Printables3DPrintBunny
Angel Christmas Bauble
Simple angel Christmas bauble to go on the tree. Slots together, no need for glue You can hang it using string or print out the hook It is 6cm tall and can be printed with no supports You can find the display tree on my profile page here:…
- Pobrania
- 2259
- Polubienia
- 497
- Ocena
- 4,96
P
Printables3DPrintyi
Organizer Box XL Double
Please read the description! When you decide to print my model please print the normal box first and look how it goes before you print the organizer holder! This model is not compatible with gridfinity! This is the Organizer Box XL…
- Pobrania
- 2232
- Polubienia
- 646
- Ocena
- 4,86
P
PrintablesJay
Square Double Maze
Two sliding labyrinths which have to be solved at once to free the screw. The main goal is to place the screw in the opposite side of the circular holes, since those are the escape from the maze. Print instructions I included the Front…
- Pobrania
- 2221
- Polubienia
- 329
- Ocena
- 4,87
P
PrintablesAnachronist
Retractable double-edge razor blade scraper
This retractable razor blade scraper is an improvement over one I used to have for scraping burnt gunk off a ceramic stove top. Features: No removable cap to get lost. Snaps into three positions: load/unload, safe storage, blade exposed.…
- Pobrania
- 2194
- Polubienia
- 307
- Ocena
- 4,78
P
PrintablesMordiev
Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)
This is a printer enclosure large enough to hold the Original Prusa i3 MK3s with the MMU2s and five spools of filament. It is remixed from strita's Prusa Printer Enclosure V2 . The Version 1 you see next to it in the pictures can be found…
- Pobrania
- 2061
- Polubienia
- 570
- Ocena
- 4,76
P
Printablesepisco
Terminal for SSD1306 1.3" OLED and Wemos D1 Mini *NEW* Double Screen
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
- Pobrania
- 1975
- Polubienia
- 259
- Ocena
- 4,94
P
Printables3DPrintBunny
Harry Potter Hogwarts Christmas Bauble
Harry Potter Hogwarts crest Christmas bauble Prints without supports, use the provided hook or some cotton to hang it on the tree. I have also attached my large Christmas bauble display tree, seen in the photo, to hang it on @3DPrintBunny
- Pobrania
- 1951
- Polubienia
- 534
- Ocena
- 5
P
PrintablesLazarus
double decker beer koozie
A double decker koozie, double walled for better insulation and capable of fitting two 12 oz cans. Load from the bottom
- Pobrania
- 1938
- Polubienia
- 111
- Ocena
- 5
P
PrintablesTri
Quadlock GoPro Double Adapter
I was looking for an adapter, but didn't find a perfect solution for my task. So i've ended up with this remix/ combination of these two items: https://www.thingiverse.com/thing:2122826 https://www.thingiverse.com/thing:62800 Thanks to…
- Pobrania
- 1917
- Polubienia
- 251
- Ocena
- 4,73
P
PrintablesIatraliptes
Wago 221 412 413 and 415 double / triple and single / double lined connector for 2020 / 3030 extrusions
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
- Pobrania
- 1885
- Polubienia
- 199
- Ocena
- 5
P
Printablesbigovereasy
Cassette Keychain Double Lite
Do you want to sell prints of my designs, get all my designs for $8, or just support me? Check my patreon page: https://patreon.com/bigovereasy https://www.instagram.com/kuleshow/ No supports, PLA recomended. I applied silicone grease…
- Pobrania
- 1869
- Polubienia
- 618
- Ocena
- 4,9
P
PrintablesBamBam Design
Double Spiral Windmill - Customizable System
The Double Spiral Windmill - Self adjusting wind turbine YouTube Short This is the next customizable windmill design. Two confusing double spiral propellers, which rotating in opposite directions. I colored the bottom & top layers with…
- Pobrania
- 1867
- Polubienia
- 592
- Ocena
- 4,96
P
PrintablesMarv
Christmas Bauble
Customizable battery powered Christmas tree bauble. Featuring Snowman and illuminating Lamppost. Print instructions I've designed to bauble to use as little supports as possible. There are only 2 files that require supports: Top and…
- Pobrania
- 1859
- Polubienia
- 908
- Ocena
- 4,76
P
PrintablesTheSameNameTwice
Water-Tight/Dust-Proof Parametric Box v2 (double clasp)
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
- Pobrania
- 1853
- Polubienia
- 435
- Ocena
- 4
P
PrintablesPeter H
VACUUM HOSE HANGER (DOUBLE)
A simple (but quite long) print to hang any vacuum hose up to two inches (50mm) diameter and two loops. My hose is extra long (6m) so needed two loops to keep it tidy and off the ground. Printed in PLA, but anything will do - does not…
- Pobrania
- 1822
- Polubienia
- 473
- Ocena
- 4,94
P
Printablestobi takenn
Silver Denarius Coin , Roman Republic
an old coin model, representing the silver denarius from the roman empire also for the best quality, print to for each side and glue them together
- Pobrania
- 1820
- Polubienia
- 136
- Ocena
- 5
P
PrintablesRob Beast (All Things STL)
Honeycomb Wall snips or pliers holder DOUBLE!
New, Screw Wall, much stronger than the Honeycomb Wall https://www.printables.com/model/544779-screw-wall Honeycomb Wall Cutter DOUBLE! If you want the single version please see my other Honeycomb Wall STLs I have made several see below…
- Pobrania
- 1816
- Polubienia
- 352
- Ocena
- 4,72
P
PrintablesOndřej Stříteský
The Czech Republic 3D terrain model
This topographical based 3D model has the shape of the The Czech Republic. How to do it? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
- Pobrania
- 1813
- Polubienia
- 191
- Ocena
- 4,85
P
PrintablesHimanshu
The Bolz – Double-Lattice TPU Squish Ball Set
The Bolz is a set of three 3D-printed double-lattice TPU squish balls designed to feel different in the hand while keeping the same playful lattice-ball concept. Each ball is not just a hollow outer shell. Every design has an outer…
- Pobrania
- 1805
- Polubienia
- 321
- Ocena
- 2,8
P
PrintablesAdam Kimmerly
ID Card Holder - Single + Double
Needing a simple double ID card holder for work, I drafted one up using Prusa hexagon styling. Single card units are just 3.5 mm thick and use less than 4 g of filament. Double card units are 5.5 mm thick and use less than 5 g of filament…
- Pobrania
- 1774
- Polubienia
- 190
- Ocena
- 5
P
PrintablesUko
Oral-B Double Stand
Found a nice model on Thingiverse: https://www.thingiverse.com/thing:1478249 But needed to have a stand for two brushes, so here is a remix :)
- Pobrania
- 1771
- Polubienia
- 164
- Ocena
- 4,84
P
PrintablesCrazy3D
Lucky 13 Double Viking Axe
Lucky 13 Double Viking Axe If you like it --> press like it :-) Double Viking Axe for the funny lucky 13 figure. The katana model is from kh4rj0 . Take a look at my models, there you can find some more equipment for lucky 13. Would be…
- Pobrania
- 1748
- Polubienia
- 348
- Ocena
- 4,94
P
PrintablesJace1969
SW Republic Commando Helmet Split Print Ready
It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10. head on over to the link below and give thanks to Dan for his great work.…
- Pobrania
- 1716
- Polubienia
- 433
- Ocena
- 5
P
PrintablesJV Lobo
Double deck Plant Pot
Printed with Winkle's Marble filament with a 0.6 nozzle for speed and it looks quite good. If printed with a 0.4 one you'll definitely get a better quality. I used support (only touching the build-plate) on the base piece, as the…
- Pobrania
- 1704
- Polubienia
- 619
- Ocena
- 5
P
PrintablesPapaYankee
Heavy double hinge handcuffs (remix)
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
- Pobrania
- 1687
- Polubienia
- 651
- Ocena
- 4,83
P
PrintablesMike B
Card Shufflers for double-sleeved Magic The Gathering or It's A Wonderful World cards
Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…
- Pobrania
- 1644
- Polubienia
- 268
- Ocena
- 5
P
PrintablesJames Brown
Kit Card - Christmas Bauble
Made this design for a simple christmas gift I could give out at work, and post to friends and family. A 2D kit card of a “shadowbox” christmas scene - simply pop the pieces of the kit card and assemble together using the slots to make a…
- Pobrania
- 1632
- Polubienia
- 416
- Ocena
- 5
P
Printablesmuddymaker
Utility Case Double Decker
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE Jan 30th: Utility Case Carry Rack System for this…
- Pobrania
- 1606
- Polubienia
- 574
- Ocena
- 5
P
Printablessthompson
Double Chamber Ocarina
A double chamber ocarina based on this model file. The only change is that I added in the second thumb hole for the right thumb on the larger of the two chambers. I printed with 100% infill and supports.
- Pobrania
- 1602
- Polubienia
- 149
- Ocena
- 4,43
P
PrintablesSektor 7 Studios
DOUBLE ROSE SCULPTURE / MODERN HOMEDECOR / VALENTINES DAY IDEA / MOTHERSDAY IDEA
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) DOUBLE ROSE SCULPTURE –…
- Pobrania
- 1558
- Polubienia
- 276
- Ocena
- 5
P
Printablesgavin
PS3 Dual Shock Controller Double Stand
Remixed this to make it a double Controller stand for Dual Shock 3 Playstation controller stand
- Pobrania
- 1519
- Polubienia
- 133
- Ocena
- 4,92
P
Printables3DPrintyi
Organizer Box Small Double
Please read the description! When you decide to print my model please print the normal box first and look how it goes before you print the organizer holder! This model is not compatible with gridfinity! This is the Organizer Box Small…
- Pobrania
- 1438
- Polubienia
- 495
- Ocena
- 5
P
Printablesblecheimer
Mini Double Bit Driver Keychain
Well ... uhm ... I just had published my latest model: https://www.printables.com/de/model/606404-mini-bit-driver-keychain Unfortunally directly afterwards I got another idea: What if I double the bit driver? I just had to do it: The Mini…
- Pobrania
- 1435
- Polubienia
- 443
- Ocena
- 4,93
P
Printablesrichmitch
Hubless print in place motorcycle
I liked the idea of a hubless motorcycle, so this is what I came up with... of course there are no handlebars to steer... erm that would ruin the look :-) The wheels do spin though and it is print-in-place, so no supports required :-)…
- Pobrania
- 1435
- Polubienia
- 214
- Ocena
- 4,8
P
PrintablesCisco3D
Double Decker Tray
Print with no Support and available in two versions (with or without hooks) also, Fits on Prusa Mini. Make it a bit taller if your printer can, specially if you plan to hang eyeglass. Cheers
- Pobrania
- 1433
- Polubienia
- 742
- Ocena
- 5
P
PrintablesMaxT
Storm Trooper in a bauble (Christmas tree ornament)
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
- Pobrania
- 1406
- Polubienia
- 363
- Ocena
- 4,93
P
Printablesbaq
Ender 3 - Double Z Gantry Leveling Tool
A helpful tool to get the gantry aligned in a dual-Z configuration. Put printed tools on both sides of the gantry Disable steppers Move hotend to the middle of the printing area to avoid collision Manually, simultanously rotate both Z…
- Pobrania
- 1393
- Polubienia
- 139
- Ocena
- 4,9
P
PrintablesMateusz Tokarz
18650 Double Row Holder Set | Wire Channels (4-12 Cells)
BOM: Printed with ROSA3D High Speed PLA Gray This is the "Double Row" edition of my battery holder set. It features grid configurations ranging from 2x2 up to 2x6, providing superior structural rigidity for larger battery packs compared…
- Pobrania
- 1388
- Polubienia
- 369
- Ocena
- 5
P
PrintablesBasementLAB
2020 T-Slot V-Slot Nut - M3 / M4 / Double Thread RV2 - Inserto per profilo 2020 filetto M3 / M4 / Doppio
2020 T-Slot V-Slot NUTS - M3 / M4 / Double Thread RV2 - Inserto per profilo 2020 filetto M3 / M4 / Doppio Suitable for: 21/04/2024 Added Double Version 17/08/2024 Update 03/06/2026 UPDATE RV2 All our designs are free to download and…
- Pobrania
- 1370
- Polubienia
- 188
- Ocena
- 3,5
P
PrintablesMake it Reality
EZ Shark - easy separation & double strength
Bigger joints made to last, and easier to break free when using a larger nozzle. Or it can be made smaller with standard nozzles and still work. The earlier comments may be correct about some of the gaps being too wide, when printing…
- Pobrania
- 1361
- Polubienia
- 221
- Ocena
- 4
P
PrintablesLinkDesigns
Double Helix DNA (no supports!)
I recently bought a new printer, and I wanted to test my CAD skills as well as the printer's abilities. This design definitely did both! It's a difficult model to print, but it looks awesome when it's finished. Recommended Print Settings:…
- Pobrania
- 1358
- Polubienia
- 74
- Ocena
- 5
P
PrintablesSnaily
Christmas Tree Baubles
I modelised this christmas tree baubles in organic shape, cause I m truly mad fan of this kind of design. I didn't generated print file cause you could print with SLA or FDM printers. In SLA is support free, but in FDM you could try if…
- Pobrania
- 1357
- Polubienia
- 299
- Ocena
- 4,83
P
Printables3DPrintBunny
Star Christmas tree bauble
A Christmas star bauble Prints without supports and slots together easily. Download the display tree in the photo here: https://www.prusaprinters.org/prints/46307-christmas-bauble-display-tree @3DPrintBunny
- Pobrania
- 1348
- Polubienia
- 258
- Ocena
- 4,93
P
PrintablesEwert Snyman
Double spiral cone fidget toy
Simple spiral fidget toy. Enjoy just pushing the parts through each other in a twisting motion. No supports or other special printing requirements. The angle is high so that printing of the overhangs is quite easy.
- Pobrania
- 1348
- Polubienia
- 134
- Ocena
- 4,88
P
PrintablesEadubs
Double Hex Bit Holder for DeWalt Drill and Driver
This is a remix of "1/4" hex bit holder for a DeWalt drill" by Lowell Alleman. I wanted to be able to hold more than one hex bit on the side of my impact driver at a time, so I made a double barrel bit holder. I used the same M3x10 screw…
- Pobrania
- 1345
- Polubienia
- 239
- Ocena
- 4,96
P
PrintablesBasementLAB
Universal 2020 T-Slot V-Slot Nut - M3 / M4 / M5 Double Thread Alu_Profile - Inserto universale per profili 2020
Universal 2020 T-Slot V-Slot Nut - M3 / M4 / M5 Double Thread Alu_Profile - Inserto universale per profili 2020 M3 Single M4 Single M5 Single M4 25mm Double M4 40mm Double M5 25mm Double M5 40mm Double Resize to adjust dimension…
- Pobrania
- 1312
- Polubienia
- 629
- Ocena
- 4,71
P
PrintablesBen Chen
BambuLab AMS Double Row Silica Dessicant Container (Vase Mode) - Fits in Hydra Mod
BambuLab AMS 2 row Vase Mode desiccant containers. It addresses all my pain points from the many other AMS dessicant containers that I have printed. You can fit 6 of these confortably in the AMS, 5 if you choose to replace one of them…
- Pobrania
- 1309
- Polubienia
- 160
- Ocena
- 4,98
P
Printablestimqui
Small 45deg Double Switch - Brio/IKEA Wooden Train Track
Basic 45° small double switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT…
- Pobrania
- 1296
- Polubienia
- 238
- Ocena
- 4,89
P
Printablestransformat
Turbine Windmill | Double Wind Chime with Bearings
Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…
- Pobrania
- 1294
- Polubienia
- 515
- Ocena
- 4,33
P
PrintablesOak
MtG Double-sided +1/+1 and -1/-1 counter
This is a remix of jman1865's Magic the Gathering counters: I just made the counters double-sided, with +1/+1 on one side and -1/-1 on the other. The box from jman1865's “MTG +1/+1 and/or -1/-1 counters with case” will fit 19 of these…
- Pobrania
- 1270
- Polubienia
- 173
- Ocena
- 4,9
P
PrintablesLordDamocles
Oral B Toothbrush Double Charging Stand Holder
A remix of: Oral B Toothbrush Double Charging Stand Holder by Fresh3Design However, I removed the second toothbrush holder, as one would be on the charger at all times, and used that space to hold the brush heads (we like to let these…
- Pobrania
- 1268
- Polubienia
- 374
- Ocena
- 4,83
P
PrintablesOwl
Double Controller Holder for Xbox | PS5 Vertical Wall Mount
Screw mounted holder for 2x Video game controllers. Works with Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5. Purchase it here :) https://www.etsy.com/listing/1768995799/double-controller-holder-for-xbox-ps5
- Pobrania
- 1265
- Polubienia
- 129
- Ocena
- 4,89
P
PrintablesHD_Creator
Double D-ring buckle
I came across the double D-ring buckle on my new motorcycle helmet. Soon after I learned on the internet that this kind of buckle was used in ancient times already. Even more importantly, until today it is one of the toughest buckle…
- Pobrania
- 1261
- Polubienia
- 169
- Ocena
- 5
P
PrintablesJA Prints and Crafts
RIDGID Tools Double 18V Battery Holder with Slant
RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…
- Pobrania
- 1252
- Polubienia
- 118
- Ocena
- 5
P
PrintablesWhity
CubLED - LED Cube - 8x8 Matrix (384 LEDs)
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
- Pobrania
- 1250
- Polubienia
- 906
- Ocena
- 5
P
PrintablesMaxT
Little Fairy inside a bauble (Christmas tree ornament)
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
- Pobrania
- 1246
- Polubienia
- 190
- Ocena
- 4,95
P
PrintablesChristian
Dummy reference model (6ft male) (Public domain)
Test dummy model based on a 6ft tall male with average proportions. Model set as public domain and free for any use.
- Pobrania
- 1241
- Polubienia
- 29
- Ocena
- 0
P
PrintablesTriple G Workshop
〓 Double Shelf - No Supports
PRUSA MK3 USERS→ So about 80% of the way through I started to hear funny things. #1 the wide jogs were pulling filament off the sides of the rolls. I had to add a loop up high to redirect it to prevent tangling. #2 the umbilical started…
- Pobrania
- 1236
- Polubienia
- 568
- Ocena
- 4,86
P
PrintablesIce992
K2 Plus CFS Mod - Heated Chamber - Space Pi Double
I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…
- Pobrania
- 1210
- Polubienia
- 494
- Ocena
- 5