Liczymy pasujące modele…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
🔒 This model is protected by copyright. If you want to use or sell physical prints, please check the paid subscription here: https://www.patreon.com/cw/Nieuchronny Meet the Dachshund Slinky , a fun and fully articulated dachshund inspired…
The Sausage Keycap is an FDM-printable, Cherry MX-switch-compatible, comically-proportioned sausage that you can put on your keyboard. The profile is based on the DSA profile, but it doesn't look out-of-place when taking the place of a R4…
This purge bucket is made as an alternative to the purge bucket provided by elegoo, that prints quicker and uses less filament. The example has been printed with overture matte PLA. Print settings: • 0.2 mm layer height • activate the…
Don't forget to also make Articulated HotDog for them! There are in total 4 slightly different versions: 2 long versions (8 segments) and 2 short versions (6 segments). Each length is available in both Curved and Straight variants. The…
A print in place model of a sausage dog without supports. The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down depending on your requirements and imagination! The…
Delight your baking adventures with this quirky 3D-printable cookie cutter featuring a wiener dog snugly nestled in a bun, topped with a squiggle of mustard. This fun design combines humor and charm, perfect for cookies, fondant, or…
The ready-make fix for your automatic Milwaukee Caulk Gun that just broke its nozzle because it fell on the floor… Print with ABS, PETG or similar material at 100% infill with 3-6 perimeters and auto supports enabled and generated. If the…
Info: original model by @kriswillcode is awesome, I just needed as small dimensions as possible, so it can be used in my other project note: i have used this in…
Your BOOST helps me continue creating unique designs and share even more free models for everyone to enjoy! 🚀 Meet the ultimate snack-time companion – a hot dog that barks instead of sizzles! This cute little pup is curled up inside a…
A kingdom for a sausage! Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The supportless lizard mount seen in one of the images is available…
This is an adapter to use this holder which was modified for the Winmau ring also with a “Target Darts Corona” ring. This requires a different holder but can be combined with these very stable feet. I print it in ASA and PLA is the same…
Meet Mini Sausage Buddy , the tiniest sausage with the biggest personality! 🌭✨ ✅ Ultra-Lightweight & Tiny – Weighs only 0.22 grams! ✅ Perfect for Desks, Shelves & Collectibles – A hilarious addition to any space ✅ Fast Print Time – Prints…
Simple ring and press to create uniform burger or sausage McMuffin patties. Size is just larger than a standard English muffin, when cooked the pattie will shrink to fit the muffin.
I looked high and low for an articulated sausage, and, finding none, I designed my own. An easy print, no supports needed. 120mm tall. Legs wiggle and wobble.
Thanks to D4rk Helmet for the original model. Created this remix to reduce printing costs with the 3D printing service providers that I took into consideration (I do not own a printer myself, so I have to rely on these) - the original…
Works for most “sausage” stile caulk gun, the nozzle hole is 39 mm and the thread is more or less 62 mm. I suggest printing in asa, abs, nylon or similar for better toughness I used asa with 0.12 mm layer height
This spool is designed to use with threaded inserts I used the ones from cnckitchen: http://cnckitchen.store/shared-products/431146823?ref=v1:431146823:-1510512723 If you use the “inner - minimal” then a full spool need less than 50g. 6x…
A simple model that I ended up putting a bit of extra work into. I’ve made four versions: one without details (perfect for painting) and one with engraved facial and other details. Each of these comes in two variants — with and without a…
I made my own version of cable holders, designed for USB-C cables with low usage of filament. One for 2 cables with 4mm diameter One for 4 cables with 4mm diameter One for 3 cables with 8mm diameter The one for two cables with 4mm…
This model is compatible with the lego system.
Say hello to the Wiggle Sausage Dog, a chunky little dachshund with a full body that flexes and wiggles just like the real thing. It prints fully in place, so there's no assembly and no fiddly parts, just satisfying segments that move the…
Print of Usagi from Chiikawa, built for a very large print due to the abundance of small facial features. Features may be a tight fit that require hammering or sanding.795
Meet the Salsache Dog! 🐶A fun and flexible articulated dachshund model – perfect for fidgeting or just showing off your print quality. Printed in one piece, no supports needed 1 - keychain flexi sausage dog 1 - flexi sausage dog i hope…
Here is the file for the DogSausage. a friend of mine has a sausage dog and happened to mention that people now always give her SausageDog themed gifts, I promised that I would never do such a thing……..so the DogSausage was born. 😁👍 I…
print time - 10min filament usage - 1.5g infil - 15%
I made this for my Tupperware meat grinder. I guess it might work on other brands too. The meat grinder end is 57mm in diameter. PETG. No PLA, unless you dont plan to reuse it. I've printed it in clear petg, so that I can see whats going…
My daughter got a dollhouse for Christmas. And because no accessories were included and the Barbies were hungry, I quickly designed sausages in Freecad. The scale should match the Barbie dolls Meine Tochter hat Zu Weihnachten ein…
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…
I designed two sausage filling funnel for my manual mincer, in two different output size. Output diameters are 34mm and 28 mm. Check the drawing for the machine side dimmensions.
Printing instructions Simply print this part on it's side (the uploaded orientation). I have tested it with 20% gyroid infill on the “upper” part and 100% infill on the teeth at the bottom. Test material was PLA. That has worked very…
Token for Wingspan pink cards to denote that it has been used or not used yet unused. There is no STL. Instead I included 3MF file for multicolor print with PrusaSlicer (using custom tool change code). This model is inspired by…
Add on for meat grinder to fill sausages. Size can be adjusted. Source code contains samples for notches and noses to make it fit on any grinder. Wurstfüllaufsatz für Fleischwolf. Größe kann angepasst werden. Der Soucecode enthält…
I wanted a box to hold all of the scraps and wasted filament that comes from my 3d printer. so I made one!
These are the parts necessary to motorize your 15lb hakka manual sausage stuffer. See the YouTube video linked below for detailed instructions.
Multi-Usage Design This means the design is made for simple 3d print them by also keeping the opportunity to just change some parts to fit different tapes. Current STL design here is for a tape with ID=77mm and a width of 20mm. The green…
Infill 7.5 to 20% , PLA/PETG, 2 or 3 walls I used 2 walls and 10% infill for a material cost of 41g! (using PETG)
Print PetG Prusament Galaxy Black Prusament PETG Prusa Galaxy Black 1kg | 3D tiskárny Original Prusa přímo od Josefa Průši This prusament fits perfectly with the printer frame Print: 0.4n 0,2mm structural 3 perimeters I tested various…
A hexbug track that can fit 2 hexbugs at a time. includes a start and finish line.
Hi. Here is coffe table that I made for myself for daily usage. It was so nice that my son wanted one extra for himself for his room :). It works great, It is stable and I can relay on it. Dimension of the table depends from you. I have…
A magical keycap inspired by Usagi Tsukino, the beloved Sailor Moon herself. Featuring her iconic hairstyle and cheerful expression, this design embodies her playful yet heroic personality. Perfect for fans of classic anime and collectors…
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
Cute and clean 3D model of a Dachshund (sausage dog), perfect for decorations, gifts, or pet lovers. Designed for easy printing on both FDM and resin printers. Ideal as a desk figure, ornament, or collectible. Scales well and requires…
Model Description: This is a set of shelves that hold small tins of spices. There is space for six spice tins per shelf with a total of four shelves by default. To keep the print easy to print with no need of supports I have detached the…
4-piece sausage stuffing horn pusher. I made this to clear my set of sausage horns after stuffing into casings. The end caps measure just under the diameter of the set of horns that I own - 10mm, 13.5mm, 17.5mm, 21.5mm. Only the two…
This device is for pricking the skins of sausages and salami to remove air pockets. Insert 6x dressmaker pins into the threaded plug. Using epoxy or other suitable glue, glue the plug into the handle. You may want to screw on the end cap…
A friend asked me to remix the well know cali dog and make it a 'bit' longer. So I did! This sausage-style cali dog is 6 cm. I can upload other lengths if there is interest.
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
I remixed Forker45’s project to suit my needs — allowing me to stack over 100 games vertically with minimal filament use Note: It's recommended to let the print cool down on the bed after printing. Since it's a thin layer, it can warp…
Print in place 3MF file has additional perimeters added for maximum stiffness.
The soft 'sausage' packed (600g) adhesives and sealants are significantly economical than usual the 300 ml cartridges. Though the sausages require the dedicated caulk gun, those typically can habit cartridges and the soft sausages with…
WORST MAGNEET SCENARIO A fridge magnet shaped like a sausage. This was one of the capsule toys I made for the BASCHZ LEEGT!! exhibition during Feest Der Leegstand (literally "Feast Of Vacancy") in Schiedam in 2017. It came from the old…
Works with Philips meat grinder. This is the prototype, I'll come back later with feedback regarding material resistance and how it works. Print instructions PET 0 infil
It's for Outdoor Party to get a Glimp on what the SENF is used for can be printed as it is NO support FDM thee is just a gap for the GLAS use 0,3mm Color change as you like HAPPY Party
This is a holder for a ThermoPro TP50 thermometer than can be glued at my “Non-damaging 3 pin base plate” for usage in an Ikea Platsa. I recommend to use UHU Plast special glue for this. I have attached the original FreeCAD (I am using…
In less than 1 minute in a few steps and with no need of installed CAD software you can customize and generate your own knob. YES IT IS THAT EASY!!! I wrote OpenScad code for generating custom knobs with editable geometric parameters. The…
I was in need of a simple keytag, which i could label with my Brother P-Touch labels. These TZ(e) tapes are coming in different flavours, so i made a bunch of different sizes. The have rounded edges and a small chamfer at the top and…
Battery Holder for Double A (AA) and Triple A (AAA) - Low filament usage + Parametric Fusion 360 file provided. Holds 24 batteries. Low filament usage. The model is designed for the follow slicer settings: Slicer to be set to 2 perimeters…
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
I created a spacer/adapter model that will grip onto the inside of the Inland Spool core and mate with the BL spool such that it fits over the Spool notch.
To help with the filling of a sausage roll, my wife needed assistance to keep the fill in position and a way to compact it. Here is my fill and compacting tool to assist with the fill process. The mold is a frame of 110 x 40mm and 36mm…
I believe that every sausage should have the right to robotic arms and legs, so I took the first step in creating prosthetics for sausages, I also did a small operation on the sausage, now it has eyes and a mouth! Now it's not just a…
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Ce plateau rectangulaire de 250x200 mm présente une surface totalement plane, sans rebord, offrant une zone de pose dégagée pour de nombreuses applications. Idéal pour servir de base à des projets, de support pour objets décoratifs ou…
Sausage Stuffing Tube Replacement for meat grinder. It is a suggested single use only due to chance of holding bacteria within pores of the plastic. Measurements: Base Diameter 37.4mm / 1.47" Base Thickness 1.82mm / 0.72" Tube O.D. 26.0mm…
The original lid that comes with Hornady's handheld priming tool doesn't work as expected. Primers get stuck inside the container, and not moving into the tool after each stroke. This is because lid doesn't have guides to allow primers to…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A delicate and elegant figurine inspired by Usagi…
Poigne multiusage adaptative, touez le trou de la taille que vous voulez en fonction de la vis ou de l'insert que vous voulez mettre ! Trou max : 15mm Profondeur max : 30mm (Rabotage possible) !!! Rappel !!! Pour des chaleurs hautes,…
anglais : Multifunctional Headphone Holder – Elegant, Practical, and 3D Printable! 📱 Organize your space in style with this modern and sturdy 3-in-1 stand. This headphone holder features: ✔ A stable headphone holder ✔ A convenient…
Finally got water meters installed. I already track power usage on Home Assistant and wanted to add water as well. The water supply company installed a B-meters GSD8 meter, which seems to be popular in central and eastern Europe. Did a…
Print however many segments and one end for each side and connect with 2x connector for each connection. Some supports required.
This suite of sausage stuffer tools are designed to get the remaining meat into the casing and through the horn. This fits the Hakka 3L manual stuffer. The interface will screw onto the nut that holds the horn (and casing) in place and…
This thing holds your sausage while you are driving. :) It has a little “drop stop” at the bottom which you can fill with mustard if you like. The included STLs are good for “Bockwurst” and “Pfefferbeisser” type sausages with a diameter…
Attention! The maximum diameter of the sausage is 20mm . People with bigger sausages need to scale up the model!! Print both models without supports and glue it together.
Ever had a Salami or a Polnische (poland style sausage) with way too much moisture and way too less flavour? I got you covered! With this (clunky) Wurstgalgen you could dramatically increase the flavour and texture of your favorite Wurst!…
Safely slice any round object accurately! Great for slicing hotdogs for babies!! slice along the fingers and once down the middle and boom safe hotdogs!
After printing you can glue hairclips to the back after you make the buns/pompom where the ponytails and fits perfectly.
This was a request from a user; I have NOT tested this for size; the model is based on my tray part and is close to within a 0.2mm or so, but all sizes are based on the top of the tray and the model was not created with a draft (as was…
A comfortable holster for those who use this compact adjustable wrench: https://www.usag.it/catalog/en/products/details/3730/294\_AC/Short\_adjustable\_wrench To be printed with tpu or other similar filament. The holster must be completed…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A graceful and iconic figurine inspired by Usagi Tsukino…
The VOM dogfood sausage holder is for defrosting the sausage overnight in the fridge. This helps to minimize the space that is taken in the fridge, while also collection all the condens. No supports needed. Size: LxWxH = 200 x 65 x 34 mm…
Designed this for My Lem #8 Meat Grinder. It did not have a Stuffer for Sausage, so I designed this you may need to make some adjustments. I printed it all, with No supports Needed. Feel free to remix, but I would appreciate letting me…
Je me suis dit que cet accessoire pourrait être utile à certaines personnes. Cet étui permet de ranger vos accessoires de travail (crayons, stylos, pinceaux, outils de création). La contenance intérieure du fichier STL d’origine pour cet…
This long little pup is packed with personality, featuring a playful fantasy style and a fully articulated body that makes it super fun to print and pose. Its wiggly design gives it that satisfying movement that articulated prints are…
Designed for stuffing 22 mm sausage casings. Compatible with most generic/manual sausage stuffers (AliExpress type). Reinforced cone design to prevent cracking at the weakest point. Printed with 100% infill for strength. Recommended print…
Cute and clean 3D model of a Dachshund (sausage dog), perfect for decorations, gifts, or pet lovers. Designed for easy printing on both FDM and resin printers. Ideal as a desk figure, ornament, or collectible. Scales well and requires…
This is an elegant vase built in Fusion 360. It is perfectly sized and twisty, good for flowers, decoration, and more. 1 part , NO supports, easy, quick, perfect. Print settings: Resolution : 20mm layer height (smaller for finer, more…
Spooky Sausage Dog skeleton cookie cutter – perfect for Halloween baking fun! Available in 3 sizes: 75mm, 85mm, and 95mm.
Y-Rail Adapter modified for usage with Hyperpixel 4" Touchscreen LCD with Raspberry Pi4 for Octoprint and OctoDash for Prusa i3 MK3S+ https://www.prusaprinters.org/cs/prints/70062-hyperpixel-4-touchscreen-lcd-raspberry-pi4-without
Summary: The feet are designed to slide into the bottom of the legs designed by @prusguy. No glue or hardware needed Tips: TPU can be finicky, and settings vary between brands, but don't be discouraged. It's more approachable than it…
Detailed 3D printable Absurdly Long Dachshund Sausage Dog figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
This is not a real multi material print. You just set another color in the prusa slicer after a certain layer. This is actually done twice. If you decide to use the glow in dark filament, use a hardened nozzle. I printed with 100% infill,…
![[~50g filament usage] ESUN, ROSA3D, Prusament, Kraus spool (1Kg refill coil)](https://media.printables.com/media/prints/135190/images/1291358_221e72b2-298c-4745-babe-2a166e0894d2/img_5168.jpg)
