Liczymy pasujące modele…
Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament. Both sizes should be printed in vasemode. The large egg is 129 mm tall and the small one 90 mm. If you want to support me or get…
Christmas tree ornaments for vase mode printing. When using light or transparent filament you can use a tea light to lightup the tree. The big tree is 150 mm tall and the small tree 100 mm You can get a permission to commercial use of…
Thats just a recut of the cactus model, as i needed a fast printable vasemode print for some vases for my gf. And here they are! Print instructions Category: Containers Print Settings Printer: CoreXY Hypercube Evolution Rafts: No…
Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. So you can store a maximum of 144 batteries, if you really want. Update 2024-02-24: Corrected models uploaded.…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. Each segment stores 9 batteries size AAA. So you can store a maximum of 225 batteries, if you really want. Update…
Simple Jug Can Pot Kännchen whatever to precisely I designed these to mix up some epoxy for my knives and pour that precisely into the handle molds. But it works super good with water too! I have 2 Designs: One with a handle to hold it…
My remix of the vasemode tulip envisioned by Pezliz and brought to life by Bugman_140. This is a more closed up version to add some variety to your bugman tulip bouquets. I've also added my own “twist” on a vasemode stem. Prints in spiral…
These are hybrid prints for the gridfinity system by Zack Freedman, meaning you have a box you print in vasemode, and feets to that, that you have to print normally and then glue to the box. (i used doublesided tape) The User…
Follow me here on Printables, thank you :) There are always new and beautiful designs published! Hello everyone :) We have designed a wonderful lampshade. This is l ampshade design 3 of a total of 5 lampshade designs . The special thing…
Here are the files for my Vasemode Tulip. @Pezliz over at @MakerDeck requested that we have a go at making a Vasemode printable Tulip. so here is my attempt (go look for @Fixumdude's too 😁) You can print both the flower and stem in vase…
Remix of one Lid to fit the imho easier and faster trashcan print. Print in normal setting, can use 0.3 until the top pattern starts, see the 3mf
Follow me here on Printables, thank you :) There are always new and beautiful designs published! Please also have a look at Patreon :) Hello everyone :) We have designed a wonderful lampshade. This is lampshade design 1 of a total of 5…
Hoioioioi Here I have my Version of a TURBO Funnel xD … Well ok I have many different options for you to choose of! Also you can scale the Funnel to your desired dimension! Parts explanation: Vasemode Vasemode : This Funnel is designed…
This is a Version of my Turbo Funnel that I created for bigger stuff like Silicagel, dry food or other bulky stuff. This 3D-printed funnel features an extra-large outlet, allowing for fast and smooth flow—perfect for transferring coarse…
My version of a lowcost snowman. You dont need alot of material, the snowman is printed in vasemode. The other parts are standart prints. The snowman is 24cm tall. For the best effect print the snowman transparent but you can choose what…
PLA nozzle 0,4 layer height 0,25 vasemode I printed out colored rings for my daughter so she could put together her own version :-) . If there is interest, I will gradually add more textures
This small desk trashcan was designed to be printed in vase mode. The model has a size of 204x204x250mm and should fit on most 3D printers. Important⚠: The model must be printed with a .6mm nozzle. Other nozzle sizes will not work cause…
Snowman in Vasemode Use a 3 layer brim with at least 15 outlines. Use no top and bottom layer. Print in clear PETG. SnowManButtonIndent.stl has button indent indent of outwards. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Follow me here on Printables, thank you :) There are always new and beautiful designs published! Please also have a look at Patreon :) Hello everyone :) We have designed a wonderful lampshade. This is lampshade design 2 of a total of 5…
This is an upgraded version of my previous design, which now includes a more steady base, an "open layer" addition and a print-in-place top with handle. The tower is meant as a method of recycling Prusament spools, but can also be made by…
Hoi :) I forgot to buy some pots for my seedlings so I loaded up some old filament and printed a bunch of these :) Idea : Fast 2 print, simple big pots with very few material necessary. BasePlate to push out the rooted soil when…
A flame LED Tea light cower. Use clear or transparent PETG. Use PETG because it is clearer than PLA. Use VaseMode only. Print Settings Supports: No Resolution: 0.2 or 0.3 mm Infill: no Filament: - PETG Clear or transparrent color Notes:…
Follow me here on Printables, thank you :) There are always new and beautiful designs published! Hello everyone :) We have designed a wonderful lampshade. This is l ampshade design 4 of a total of 5 lampshade designs . The special thing…
A quick and easily printable planter. It is water tight (at least mine are) Printed with 0.8mm nozzle If you want the black/silver pot from the pictures, it is on my profile :) Let me know if you have any requests for vases/plantpots :)
Fits a BIC Mini lighter. Instruction: Print in Vase-mode with 2 solid bottom layer! Afterwards punch a hole into the little extension and add a little metal ring. Works best with hard TPU. But is working with PETG just fine too.
Heartbeat Vase for vasemode If you like it --> press like it :-) Make your loved ones happy with this vase! Remixed the georgeous model by DaveMakesStuff , that you have high quality with smoother surface you can print it in vase mode to…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. So you can store a maximum of 70 batteries, if you really want. Update 2023-10-14: Added document “Gridfinity - an…
This is my take of a self-watering orchid pot. The evaporating water increases the humidity in and around the pot. Large and small version in 100mm and 120mm (inner pot size) The outer planter is printed in vase mode, is optimized for…
Heyho Part 2 of this System: Stackable housings for the boxes! https://www.printables.com/model/913237-stackable-container-shelf-system-vasemode-part2 I really like to design functional stuff. But I always try not to waste any excess…
I enlarged the cover to 110%, so you can more easily put it as a cap over your tea light. Furthermore, it is vase model I used one layer at the buttom to let the model stick better to the bed. The model is printed in PLA with 0.25 layer…
Follow me here on Printables, thank you :) There are always new and beautiful designs published! Hello everyone :) We have designed a wonderful lampshade. This is l ampshade design 5 of a total of 5 lampshade designs . The special thing…
Nuka Cola bottle. Can contain 0.5 litre. Print in VaseMode with 3-4 bottom-layer and 0 top layer. Paint with clear epoxy for clear glass result and no leakage. You may have to adjust the size of the cap to make it fit after painting with…
I bought a Tertial lamp, but at night it creates a brightly lit spot with deep shadows, making me uncomfortable. So I designed a replacement lamp shade and printed it from a translucent material, so it lights the rest of the room too…
Lamp or Vase with simple geometrical pattern. For the Lamp I removed the Bottom part. the form can be slightly stretched in the slicer. For the Lampe i added +12percent in x+y direction. Happy printing
I recommend a nozzle of max 0.5 mm, layer max 0,25 Print in vase or standard mode
Bat shaped candy dish - print in spiral/vase mode. I scaled the original model so it could be easily sliced in vase mode to make a dish. Very cute, I think! Printed at .2 layer height, 5 bottom layers, no top layer (zero top layers), no…
If you want to print in vase/spiral-mode use the filled model. Don't forget to set top layers to 0 and the bottom minimum 3-6 layers. You can also use the 1mm thick hollow model for normal printing Checkout my other Designs :) Category:…
Printed on stock Prusa MK3S+ in spiral vase mode in PolyMaker Silk Bronze PLA. 0.2 Layer Height 215 deg C
Print in vasemode, cut hole in bottom, insert LED, light up.
An old design of one of our first models - hadn't been posted yet, so we hope you like it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
I couldn't find good snowflake ornaments that would print fast and clean, so I decided to make my own. These are printed in vase mode and each one takes around 5-8 mins on my Ender 3 Pro. These snowflakes are designed to be printed using…
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
Heyho This is part 2 of this organization system! The housings for the stackable container! You can use the housings to transport your container/ boxes without the parts falling out! Especially if you combine the container with a lid for…
There are 4 folders, each with different height (1 = 25mm 2=50mm 3=75mm 4=100mm) and one folder with universal lids. It is crucial to heat the bed for the first layer to 60°C othervise the bottom will be unsufficiently bonded to the…
vasemode christmas tree use LED candle to backlight Easilly upscale or downscale to your needs I used RepRapper tricolor PLA filament to print the tree.
My friend lost his ZOHD Drift's front canopy– so I designed him one to be 3D printed, obvi The original one, even when printed with 1 perimeter and minimal infill, was still far too heavy and so strong it was vast overkill. So I…
Vasemode contest entry. Beautiful twisted design. Will fit 2 dozen roses!!!!
A short geometric vase mode tea light holder in StructureSynth, inspired by Maker's Muse video; https://www.youtube.com/watch?v=1VHV--A9x Use Vasemode (spiral vase perimeter) , scales nicely USE PETG IF YOU USE A REAL TEA LIGHT
Rubiks Cube Stand (Vasemode) Printed with a 0.6mm nozzle (works with 0.4 too but 0.6 is more stable) 0.3mm Layer height 4 bottom Layers for stability Vasemode activated Zauberwürfel Halterung/Standfuß Gedruckt mit einer 0.6mm Düße (auch…
Geometric lampshade, compatible with the usual E27 sockets. To be printed in vase mode, narrow side down. 0.6mm nozzel recommended. Outer wall: 0.67mm 150mm height, ~140mm width. Fits a Bambu A1 Tested on A1; rPLA, rPETG. Looks nice…
Fast printable battery box for 18650 lithium-ion batteries. Printed in vasemode with Prusament Premium PLA Mystic Green. First Layer: 0.2 Layer Heigth: 0.32 Solid Layer Bottom: 5 Spiral Vase: yes Infill: 0% Nozzle: 0.6
This is a simple lamp diffuser/shade printable in vasemode. Dimensions: 45mm hole socket 100mm diameter 200mm height Printer settings: 60mm/s (you dont need more) 0.28 height 0.8 width 0.4 top and bottom width 4 bottom layers
I needed a lampshade but could not find one that I liked that fits on the Ender 2 Pro, so I made this one. Print in vasemode with 10 bottom layers at 0.2mm layer height. I used a 0.4mm nozzle with 0.66mm perimeters. Transparent filament…
Use PETG for clear vase. This is a VaseMode print only. Se picture for my Siplify3D parameters for VaseMode. Category: 3D Printing
Simple minimalistic modern Vase
A realy nice Art piece that comes alive when you let it see some light! Printed in Prusament polychromatic mystic green. Designed using OpenSCAD, source file added so you can make remixes. Don't forget to activate vasemode in your slicer!…
A set of modular drawers I made to organize screws and other small parts, designed to print quickly in vasemode. I have only used the 1x1 variant, but the bigger ones may be useful to someone else Printing Instructions Print the shells…
This is a remix of Jboe's (https://www.printables.com/social/175315-jboe/about) vasemode battery holders. I only created the one I need because 1) I don't fully understand parametric modeling in Fusion and 2) if it were parametric, it…
This is a remix of Jboe's (https://www.printables.com/social/175315-jboe/about) vasemode battery holders. I only created the one I need because 1) I don't fully understand parametric modeling in Fusion and 2) if it were parametric, it…
Vasemode lamp. Put in some cheap ledstrip, kinda curl it up. I printed it in white. Printing Print in vasemode Post-print Cut hole somewhere to let in power for a led strip
Print in place vase, 100mm wide base 120mm vertical, The walls are 2mm thick so id recommend 0.5mm walls and as low as you can print for the layer height, No Vase mode. PETG. Roughly 5 hours on 0.15mm layer height at 50mm/s
Print with 4 botom layers and try pushing you're speed's.(i printed at 350 on my ender 3 :) )
Love the Vorondesign? Need a little desk trashbin/basket to get rid of printing scrap? Or only love printing things ultrafast in vasemode? Then check out this Voron design cube - easily printable in vasemode! You only need to activate…
Fast printable battery box for C / baby / LR14 batteries. Printed in vasemode with Prusament PETG Prusa Orange. First Layer: 0.2 Layer Heigth: 0.32 Solid Layer Bottom: 5 Spiral Vase: yes Infill: 0% Nozzle: 0.6
here we have a bowl which can easily be printed in vase mode after printing you can simply slide the filament (1.75mm) into the openings provided to get the cool 2-colored look The size can only be changed in the Z direction
VaseMode Star. Use a brim with 2 to 5 outlines. Print 2 pieces in vasemode. Carv out the end of the "shaft" to fit the top of the tree or Tea light. Glue the 2 half together. One model for LED-Tea-Light with big shaft. One model for Xmas…
Planter with interlaced Pattern for vasemode
Hey there! I'm excited to introduce you to my very own creation, the Avocado Seed Germination Floater. Easy 3D Printing in Vasemode: I'd suggest to increase extrusion width to 0,6mm. Patience Pays Off: Remember, growing an avocado tree…
X-mas tree. Important. In vasemode, use 0.1 mm layer height. If you use 0.2mm layer height, the tree wil fall apart while printing. There is also one STL file for tree in regular mode printing, but vasemode version will give a better…
All credit goes to flowalstick. Please donate to them before you donate to me. I simply made some modifications in blender to add a top and change the bottom to be flat. I can make another version with the holes in the bottom if people…
This is a remixed version of the lotus spiral vase that you can just print, not using vase mode.
Geometric lampshade, compatible with regular E14 or E27 sockets. Files include a version for E14, E27 or a combination where the E14 hole can be broken away to yield an E27 hole. To be printed in vase mode, narrow side down. 0.6mm nozzle…
If you ever used the powder option on your coffeemaker you know its quite easy to sill powder all over the top of your bean reservoir. I designed this funnel to be printed in vasemode. If you are using the beans reservoir extension…
These Holders are for standart RGB-LED-Strip Remotes (94x52x8 mm) and another one that I use in the kitchen (90x40x8 mm). The approach was pretty straight forward: Minimum filament use For better appearence I chose to design them to be…
Stand for Arizer Stems with space for small parts I was not happy with the normal print file, so i decided to print this thing in spiral vase mode. You can use the Spiralvase Mode Modell / use the attached .3mf file for print instructions…
A simple trash bin that uses freezer bags (3liters, ~25cm width when flat) as garbage bags. I primarily use it for filament waste (failed prints, P1Ps poop, purge line). The bin will deform to fit parts bigger than its diameter (160mm),…
A friend of mine wanted this symbol as a cookie cutter to create something special and unique for the coffee table at a church event. Since I couldn’t find a suitable template, I created my own version. Cookie Recipe(30pcs): 250 g flour 1…
Dieser Trichter ist schnell gedruckt und eignet sich für das Einfüllen von Feststoffen. Alle Dimensionen können in der OpenSCAD-Datei angepaßt werden. Der Trichter in den Druckdateien hat folgende Maße: Außendurchmesser des Halses: 32 mm…
its a nice gadget for the Spiralmode test you can print it at 0,3mm layerhight or even up to 0,5mm usa a linewidth of 0.6-0,8mm Speed is up to the Filament flow its at 45mm/sec printed !!! THERE ARE CLEAR STL for your own Branding !!! IF…
If you want to print in vase/spiral-mode use the filled model. Don't forget to set top layers to 0 and the bottom minimum 3-6 layers. You can also use the 1mm thick hollow model for normal printing Checkout my other Designs :) Category: Art
a box for pens small tools sweets or whatever you want it is simply printed in vase mode after printing you can simply slide the filament (1.75mm) into the openings provided to get the cool 2-colored look The size can only be changed in…
Geometric lampshade, compatible with regular E14 or E27 sockets. Files include a version for E14, E27 or a combination where the E14 hole can be broken away to yield an E27 hole. To be printed in vase mode, narrow side down. 0.6mm nozzle…
Settings Theses are the main settings to Change if your Using Simplify3D These give me extra strengh in the print as the line width is 2x the size of the 0.4 nozzle. Under Layers Tab Infill 0% Primary layer Height 0.2800 Top solid Layers…
Simple Vasemode Pen Holders. Organizer for 6 different options.
Geometric lampshade, compatible with the usual E27 sockets. To be printed in vase mode, narrow side down. Slight overextrusion recommended (outer wall: 0.6mm). 150mm height, ~140mm width. Fits a Bambu A1 Mini. Tested on A1, A1 Mini; rPLA,…
Geometric lampshade, compatible with the usual E27 sockets. To be printed in vase mode, narrow side down. Slight overextrusion recommended (outer wall: 0.6mm). 150mm height, ~140mm width. Fits a Bambu A1 Mini. Tested on A1, A1 Mini; rPLA,…
One day i stumbled over an Anthem Loot Lamp, and thought i wanted to do that with vasemode. So i started designing my own, with a standard E27 Philips HUE RGB Bulb inside. Designed in Fusion 360, the diamond shape lampshade is meant to be…
Added some support for posts. This is the closed version.
Simple round vase. I printed it in TPU, just for fun. Printed on my MK3S+.
your new trash bin. scale it up do what you want you can even make it your new home.
This is my take on trying to prepare Hexagon box in vase mode according to the video by Clockspring 3D Print each part separately!! In vase mode Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Notes:…
General: The main component of this “model” is a Fusion360-Archive with wich you will be able to generate your own customizable spiral lidded containers. The included .3mf-files can be used as an example if you just need a travel…
After printing you will need to apply a little force to get the test tubes it. They fit pretty snugly. You can print this not in vase mode but you might have to scale it up a couple percent as to get them to fit as a solid print wont have…
The .stl model is bigger than my print so make sure to scale it. I couldn't get loft to behave if I made it any smaller.
Updated version of my old faithful test print design, now with squashed vase version as well as the traditional pot version. Both versions are made to be printed in spiral vase mode. up the extrusion width for more strength
You can scale it in the printer program and create an infinite number of different forms.
A simple and elegant Christmas tree designed for LED lights. The green version is 240 mm tall and the tree shell is printed in vase mode . All other parts (base, trunk, star and LED frame) are printed in normal mode. All elements are…
Here is a cover for the Silvercrest's SDA 350 A2 dehydrator to put 2 filament spools in it. The main différence compared to existing model is that this one can be print fast in one single part in spiral-vase mode (on a 350+ bed ). It can…
![Lampshade L-D-4-150 [vasemode]](https://media.printables.com/media/prints/532b73ac-7742-4b2b-bf1a-9ecec5cf9f9d/images/10603585_962113db-7d33-4e2a-83ec-d6349c36ef40_4de32aa1-2244-4832-912a-c64639950c1c/img_20250904_160110.jpg)
![Lampshade, pendant light L-C-4-150 [vasemode]](https://media.printables.com/media/prints/dec5148d-7699-4831-8f9b-a9ee1c5a6367/images/10656032_e49a6044-186a-446a-a671-81dbe82201a9_443225a0-c382-467d-a007-cfd7a6aac5c3/c-4-taube-on.jpg)
![Lamp shade, pendant light L-D-5-150 [vasemode]](https://media.printables.com/media/prints/b64c83d8-8f04-45ff-a12a-3c51d9086999/images/10847425_19481825-5e7f-4bed-9ed1-db08a864b86d_0e751b9f-e1fe-4feb-b55a-c51d8ff28ff0/l-d-5-150-on.png)
![Lampshade L-B-1-150 [vasemode]](https://media.printables.com/media/prints/86a2294b-978f-4cf9-9dc7-90df175d8a63/images/10554572_5eaeec33-1c8f-48ac-b4c8-6c5bddbbd677_c2a7f9f3-29d2-4e8c-8e55-bf5f02efa2d1/l-b-1-150-0.jpg)
