141 modeli
With the increasing prices of WLVs for cameras such as my Mamiya 645 1000s, I've designed this one for me. Future plans include making it foldable and adding a lens to it!
If you wear glasses (or sunglasses) and shoot photos outdoor with a DSLR, you must have been annoyed by how sunlight from atop blinds you when you are looking through the viewfinder. No viewfinder-mounted visor can solve the problem…
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
A simple print that fits into the space above the Mamiya RB67's ground glass without interfering with any of its viewfinders to indicate framing for 35mm film through the RB/RZ67.
If you've printed my adaptor to use 35mm film in a Hasselblad A24 magazine you will find this viewfinder frame a useful aid when taking photos. It masks to a 2.3:1 aspect ratio and should be orientated vertically under the viewfinder…
I wish Hasselblad made a better viewfinder mask for shooting with 907x CFV II 50C digital back on old analog body so I made mine. There are several similar models available here and there, but these are complete set of all crop formats…
It simply clips in. Print it in the best resolution you can. Printed mine o the extra fine setting on the P1P (0.08mm layer height).
I think my Pen FT was dropped by a previous owner, breaking the viewfinder eyepiece where the cold shoe bracket mounts. Fortunately, 3D printing technology that the original designers never would've imagined allowed me to make a…
Another attempt to design a cheap and easy to make wide angle viewfinder for Fat Shot 617 and Fat Shot X cameras using widely avaliable parts. Less compact overall (longer but less wide and a bit heavier) but much more convenient than the…
This is a mask for the Hasselblads Viewfinder. It is meant for use with an A16 film back to support composition in 645 format. It fits perfectly between die matte screen and a Prism or Waistlevel Viewfinder. Feel free to remix or redesign…
I needed a lens and viewfinder cover for my K1000. The design is just random lines given differing offsets. The lens cover should fit very tightly. However, the viewfinder I made a little more loosely. I had it tight on there, but it…
Notes Designed this mainly to stop the hard plastic on my AE-1 viewfinder from scratching my glasses. Tested to fit Canon AE-1, and may fit other cameras. The dimensions of the rectangular hole are 18.3mm x 17.5mm. Printing Must be…
Phase ONE XF waist level viewfinder a non-finished but useable project
Eine Abdeckung für die untere Öffnung der Wechselsucher der Nikon F und F2 Kameras. Die Paßgenauigkeit der Abdeckung wurde an 14 verschiedenen Suchern ausprobiert. Eyelevelfinder, Lichtschachtsucher, Lupensucher, Sportsucher, DP-1 und…
Very simple model used for blacking out the meter on the Olympus 35 SP 35mm film camera. Not designed to be pretty, but it's functional. It leaves the rangefinder patch, bright lines, and meter window unblocked so you can still see those…
I did file the two little plastic pieces to have flat surfaces. The viewfinder probably has a field of view of 35mm.
Sun Hood and Viewfinder for Blackmagic Design Pocket Cinema Camera 4K & 6K I've made two versions of the Sun Hood. Both designs use a hinge to tilt up the Sun Hood and easily access the touch screen of the camera. -80mm mini Sun Hood…
ALPA Viewfinder hasselblad 903swc Style Use viewfinder from instax mini7s plus first element of the viewfinder from instax wide 200 same angle of view as swc
ALPA MEGA VIEWFINDER Type 1 You might also need an Olympas WCON-08B as optical parts
Since i dont have the original part anymore, this is a version made to fit and to work. It needs to be made out of FLEX material and is just slid on the viewfinder
The ARRI Alexa Electronic Viewfinder cap was designed to keep the glass covered when not in use.
ALPA RB67 Viewfinder Adapter takes 78x78mm focus screen
STOP DO NOT USE, REVISION IN PROGRESS TO CORRECT AN ERROR Universal Panorama Camera Viewfinder is a viewfinder system suitable for wide to normal lenses on panoramic cameras. Currently the development is geared towards 6x17 panorama…
I print it with support enforcers below the inclined section at the caps downside - but might as well work with bridging. I use PETG as base material for the lower section to ensure enough stiffness and Flex as material for the cup. To…
This is a lens cap that is calibrate specifically for the Polaroid Now camera. It also includes an important viewfinder to avoid the issue of forgetting to remove the lens cover. The openscad code has the capability to generate the text…
This eye cup is for retro Polaroid 600 cameras. this is for the Polaroid eye pieces have disappeared in the sands of time. This took me two nights to make this, with many prototypes. I'd much appreciate you liking my model.
A template for cutting leather/fabric or other materials to replace the worn out leatherette on a Hasselblad V-System Waistlevel-Viewfinder. Print instructions When lasercutting thin leather, I'd recommend taping it to a piece of MDF…
This a cap for Polaroid Now camera which covers the lens and the viewfinder, as well as sensors on the front panel. I was designing it to be printed out of 95A TPU, but you may have luck with PLA or PETG. No supports are needed.
Please have a look at the Vimeo video here . The Escura Hasselback focusing screen spacer & viewfinder holder has a lower height and a tighter fit compared to version 1 . Version 2 is a bit more delicate and should be handled with care.…
Protects your eyeglasses from being scratched by metal viewfinder. I have only used for my Leica M2, should work for other M series cameras too. It is designed to be printed in TPU as it will wrap around the viewfinder and hold snugly.
Voigtländer Bessa 1 viewfinder / sportsfinder Material PETG 1 x 2x4mm screw Do you like it? Please consider to buy me a cup cup of coffee .
Mirrors and lenses from a Kodak Autographic are fitted into a 3D-printed housing. The cold shoe is designed for Minox but is compatible with many other cameras. The Kodak Autographic waist-level viewfinder is large and works perfectly for…
i got a Ricoh GR 1 with a broken Viewfinder Cover and couldn't find any replacement for it. I had some time to create a viewfinder cover replacement in blender. Unfortunatelly i don't have an original one so i don't know how the top right…
Version 2 is a much improved model. The area around magnet has been thinned for better connection and the hole is a tighter fit with the solar filter. Printed with Petg.
I wasn't really satisfied by how the multi part hood worked out on this original model by Madog541. So I made this "classic style one as a replacement. The original maodel calls for 1/16" wire. For all the metric folks out there: you can…
Could not find any easy to use, easy to make, cheap and compact viewfinder to use with Fat Shot 617 - Medium format 6x17 modular panoramic film camera so I made my own. It uses optics from a widely avaliable " wide angle 0.45x smartphone…
Aaaah, now it's complete.. overengeneered, overcomplicate and hard to print. 7 parts, aerodinamic, fins and boosters, names and numbers. I plan to tear it down and do a proper paint job one day, Warhammer 40k style. No serious…
A simple Viewfinder for my 1939 Leica iiia. I was looking for a viewfinder for my Leica iiia rangefinder camera, but they were either cheap with poor optics, or very expensive with good optics. I wanted something with good optics and…
Like everyone else here, i got excited when i saw the model for my 23mm F2 with the window but was disappointed to see that the model got removed or canceled. When i printed it i noticed that the turning was really tight due to the…
Tested on 600D, probably fits on other Canon cameras. Let me know.
A two piece design allowing you to use a Kiev TTL viewfinder on a Lubitel 166. This is so much nicer using this than the horrible waist level finder and even has a built in meter! This took many many reiderations with it being remodeled…
It's a viewfinder mask for taking photos both in 645 and 35mm (56x24mm). The print drops on top of the focusing screen. The 35mm mask does not include the edge of the sprocket holes on either side since I found that to be masking too much…
Print, add two 18mm disc magnets (under 2mm thick) with cyano glue and you are go!
Polaroid Template with multiple uses: Frame your shot before taking photo Use as a mat in frame to get that classic look from standard prints Add to digital photos for instant nostalgia Use to as drawing template OnShape model you can…
Designed to fit the D50, but it probably fits other cameras. It's a tiny print, let me know what other cameras it fits!
Bottom cap for any Zenza Bronica GS-1 viewfinder, including the GS-1 Prism AE Finder, and the GS-1 Rotating Prism AE Finder. Originally I made this to be printed with TPU, for flexibility, and it certainly works, but it's not very…
90mm viewfinder on 6x17 panocamera , only 3 pieces and one screw. Print it better than I did please! First, insert the optical 0.45x wide into the body, the ass has 30.5x075 screw, and must be screwed in now. Previously break in the…
Use thin/flexible orings to attatch the hood/faceplate to the monitor and M3x20 screws to secure the cover to the faceplate. I also included the Fusion360 file. Most of the useful dimensions can be adjusted in Modify > Change Parameters.
If you have never tried to film small, very fast moving objects at some distance with with a zoom lens camera, you will probably not understand why this cross-hair viewfinder is a very valuable addition to your camera. A perfect…
Used for blacking out the meter on the Olympus 35 SP 35mm film camera. It leaves the rangefinder patch, bright lines, and meter window unblocked so you can still see those through the viewfinder. Clips in place so it doesn't fall off in…
Viewfinder for 28mm on FF or about 18 on APS-C Optics extracted from Olympus Trip 50/51 505/600 Required some cut/break on parts from the sides to fit. Glue the front cap and the shoe base, you can also use one M3 for some extra security.
When training eye gaze communicators, having a viewfinder can be helpful. They allow the user to identify the target, focus their gaze, and active the appropriate button. Part Hardware Required Quantity Large View Finder M2x 12mm 1 M2 Nut…
First, I recommend you to view the video by Yodayoungling (John-Michael Mendizza). The video explains the Hasselback Instax back made by Escura and the challenges you may have with it, but also what can be done about it: The three files…
A 6x4.5 mask for the Lomograhpy Lubitel 166+ viewfinder. I'm not sure about the compatibility with older Lubitel models. If you have the older model, feel free to try and share the result with other. I created it very thin (3-4 layers)…
A simple, friction-fitting cover ring for the knurled viewfinder eyepiece on a FED-2 (ФЕД-2.) The knurling had a habit of scratching my spectacle lenses, but this discreet accessory eliminates that problem and doesn't interfere with the…
For the Bronica GS-1 6x7 Camera - all viewfinders. This mask allows you to have a guide for shooting 6x6, whether you're using a 6x7 or 6x6 film back. I used clear PLA, but any color/material could be used. CAREFULLY set it on top of your…
I have tested the adapter with three variants of Hasselblad viewfinders and one example of a Kiev viewfinder. They are very similar, but the interfaces are not exactly the same. This adapter has sufficient clearance to work with any of…
So, I bought a Mamiya 645 1000s with a prism finder. I was soon flabbergasted by the fact that a waist level viewfinder costs nearly 200€: Almost as much as a M645 body without a lens. The thing with waist level viewfinders is that they…
I made a 6 inch by 6 inch view finder for art and painting. It goes from 6 x 6 down to ½ x ½ All you need is two two 16mm M3 cap screws, I warmed up the cap screw caps with a lighter and pressed the head into it, it works better if you…
Cap for the Voigtlander 15mm Viewfinder. Category: Camera
Very simple Dustcover for Kiev88 Camera Prism Viewfinder
Stift zur Entriegelung von Sucher und Mattscheibe an der Nikon F und der Nikon F2. Druck aufrecht stehend, mit Brim damit der Stift nicht umfällt und eventuell organischen Stützmaterial für die Öse. …………………………….. Pin for unlocking the…
I really love the original design from JanGeloen but since I use in film rangefinders the alignment with the lens was a little off, so I recreate the main shell but with the mont for hotshoe to the side. Here you will find only the main…
This mask can be used to preview what a panorama would look like like in the Xpan. It can be used when adapted to 35mm. Personally I prefer using 120 since the resulting pano is much bigger than in 35mm and the XPAN. The way I use this is…
Ergonomics and Shooting Benefits: With the screen flipped up, the viewfinder allows you to hold the camera close to your body, keeping your elbows tucked in. This significantly improves handheld shooting stability and reduces fatigue…
This custom battery adapter is designed for the KIEV 88CM TTL viewfinder, providing a modern solution to replace the discontinued 6V battery. Built with precision and compatibility in mind, the adapter ensures seamless functionality of…
Horseman ER Zoom Viewfinder to coldshoe adapter
Nikon camera models such as the D800 have a built in curtain to close the viewfinder. But not on the “cheaper” models. Normally this will not be any problem as long as you don't do long exposures like in astrophotography. If the dark pic…
These are cones with the same opening-angle as the corresponding lenses would have on 24x36mm film. So in theory, if you can see something through these, it should be in frame, not withstanding parallax error, warped prints or crooked…
A viewfinder mask for the Mamiya RB67 focusing screen; helps with composition when adapting 35mm(135 format film) to the 6x7 film back of the RB67. It masks the finder for a 1:2 panoramic aspect ratio and XPan crop. Print & Fitment…
I created these caps to protect the lenses on my TTArtisan 28mm viewfinder. You may need to add a brim--the rear cap is somewhat small. Mine printed fine without but YMMV.
Simple camera model for quick printing to entertain toddler. Print if you feel you need one too. Fusion CAD attached in case you want to see how quickly I tossed this together or make revisions.
TTArtisan 35mm Viewfinder cold shoe since the original one included in the infidex files was too snug. Including the insert in this page too. print at .1mm and might have to sand/rub one corner of the insert to have a snug fit.
Snap on Panoramic "Viewfinder" adapter for the Sony a6000. Use with a 16mm lens to get the FOV of the Hasselblad X-Pan. Crop the image to 65:24 or 1:2.7 in Lightroom or your program of choosing. Example images taken with the Panoramic…
This eyecap is designed to enlarge shadow area around viewfinder. "View mode" button and correction wheel will be enclosed behind this eyecap. I use hot shoe cap to fix the eyecap better, but it would be fixed without it too. Eyecap…
let the print cool down before using or it might snap This tool should be usable for: zorki 1 zorki 2 zorki S fed 1 fed 2 maybe also usable on the Schraubleicas, im not really sure about this since i dont own any leicas to try this out on…
Cases for TTArtisan 21mm viewfinder for rangefinder cameras.
Mamiya press 50mm viewfinder to 90mm on 617 conversion
Nikonos 15mm Ultrawide Viewfinder to coldshoe conversion
Dieser Schutzring kann auf den KMZ Turret Viewfinder, den es als Zubehör für viele analoge Kameras mit Sucher und Wechselobjektiven gibt, aufgesteckt werden. Somit lassen sich Kratzer auf Brillengläsern vermeiden. This protective ring can…
A viewfinder cover for a Canon PowerShot ZOOM camera. Incudes a tie point to stop it being lost. Note the cap is not square, and only fits with the tie point in line with the lanyard tie point. The lens cap can be downloaded from…
This is a mount to allow you to atatch a Sony DXF-50 or other similar vintage broadcast camera to anywhere you wish. I chose to mount my DXF-50 to my workbench. Keep in mind that you can power these with an Averkey VGA-to-NTSC converter,…
Schachtel mit Deckel für den Nikon F Photomic Sucher FTn Es empfiehlt sich die Schachtel und den Deckel mit z.B. DC-Fix Velour oder dünnen Moosgummi auszukleiden. Gedruckt mit PLA ohne besondere Einstellungen. ……………………….. Box with lid for…
This is an adapter to mount your TLA140 and 21mm Viewfinder on your Contax G1 G2 not tested, might work too
Rolleiflex SL66 viewfinder mask for6 by 4.5 film backs. Hope it helps with composition.
The original rubber eyecup has gradually crumbled away. I designed a new one. Printed with TPU, it could possibly be more durable than the original. The eyecup must be printed with supports. Print Settings Supports: Yes Resolution: 0.2…
ENGLISH: A practical tool for painters, illustrators, and photographers who want to refine their compositions. This viewfinder allows you to insert printed acetate grids to analyze framing and structure more effectively. 🔹 Specifications:…
Český popis: Očnice navržená pro fotoaparát Fuji X-T20, která účinně blokuje boční světlo a zlepšuje viditelnost obrazu v hledáčku. Nasouvá se do sáněk blesku a zároveň na obrubu hledáčku, takže pevně drží bez nutnosti jakýchkoli úprav.…
TT Artisan recently released 21 and 28mm viewfinders for Leica and other rangefinder cameras. The viewfinders are nicely made of metal and glass but don't include any sort of protection for the glass lenses. I created these caps to…
📸 Waist-level viewfinder (Angle finder): This accessory allows the photographer to shift from the standard eye-level shooting position to a top-down viewing perspective. It facilitates easier framing and composition when shooting from low…
A Case for the 65mm 5.6 Viewfinder, to give it a bit of protection in a camera bag. Printed in PETG
Viewfinder on the tractor hood which help u in the field works
For Holga medium format 120 film camera. This part can be adhered to the objective side of the viewfinder to provide a reference for center and rule of thirds lines as well as diagonal lines. Recommend using a spot of silicone adhesive in…
This is a mount I made for my Iphone SE so I could mount it on my Skywatcher Dobsonian telescope using the standard viewfinder dovetail mount. Should also it to any scope using the same finderscope dovetail. Used on Dob mount, but should…
We designed a way to view glow in the dark filament in the light! Print Settings Rafts: Doesn't Matter Supports: Yes Resolution : .15-.2mm Infill: 15-20% Filament : Protopasta HTPLA and TPU Notes: -Print all parts -The padding is printed…
Viewfinder for my pinhole cofee. The pinhole cofee : http://www.thingiverse.com/thing:245574 pinhole cofee mount for vanguard : http://www.thingiverse.com/thing:1486588 Diameter box of coffee : 85 mm 31/0/2018 : Add V2 Print Settings…
A simple cap to protect viewfinder. Uses a 19 mm x 0.75 mm threaded plug. Just thread it on the viewfinder. May work on other Nikon cameras. Two versions available, with or without serrated edge. Best print with PETG. Don't need supports.…
I absolutely love the Digital Harinezumi, and I wanted to push the boundaries of what it can do by allowing it to take 17mm phone lenses! To install the lens adapter, you will need to lightly sand down the retaining nubs on the side, I've…
