Liczymy pasujące modele…
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Weather protection with a 3D-printed gill shield (Stevenson screen is a box) for RuuviTag temperature/humidity/pressure sensor. Basically a DIY bluetooth weather station. Keeps the water out yet enables the air and bluetooth to go…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a weather vane for a WeatherFlow Precision Shooting Weathermeter. This mounts to a ¼-20 tripod mount. I also included a pdf file for the spindle if you wish to make from AL or other material. Note: I did not model the ¼-20 threads…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A flowerpot that can have RGB LEDs inside the base and cloud! Print instructions Hey guys, this is the model and guide on how to build my weather reactive flower pot. Well at least if u want to go this way since you're free to flash any…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Damaged-Weathered Star Wars Data Pad Not sure what this is good for. But I put in some time on this experiment, so I decided to publish it. Originally, I wanted to work out as a switch plate cover. It did not make the grade. The layout is…
Wydruk około 5,76 €–7,04 € nettoWstępna wycena jednego wariantu
1 X bearing 10 x 15 x 4 mm 4 X M3*40 countersunk bolts with nuts
Wydruk około 7,36 €–9,00 € nettoWstępna wycena jednego wariantu
Remix of the Case Cover to custom fit my desk shelf and provide some angle. 70 degree layed back orientation for better viewing, simply replaces the front of the OG design by Rafal Ko. (https://www.thingiverse.com/thing:5157668/files)
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
The is a phone holder for the WeatherFlow Meter. This was designed for a Samsung Galxey S9.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
Here's my version of Tony Stark's MK 1 Iron Man helmet. I'd scale it 360% to be full size. Be sure to check out my other models. If you like my work you can buy me a kofi, https://ko-fi.com/reprops Category: Props
Full tutorial to be found on the RAspberry Pi website .
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
Gothic shelf or mirror frame for hanging on wall.
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
PLA can create such wonderful details. Using normal PLA we have introduced a wooden texture to a vase to create this incredible weathered wood look. Oil paint with multiple washes does the rest. There is a second stl which flattens the…
A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material. Print instructions Parts 2x Stainless…
Weather Station using a ESP32 You will have to check the github for the project. I found everything I needed to create this circuit. https://github.com/lmarzen/esp32-weather-epd About the model I created this model myself. You will not…
Please post a make if you make this! :) Demo of print status screens: https://imgur.com/a/yX2dhjJ Compact Case for Wemos D1 mini wifi ESP8266 with 0.96 Inch Yellow and Blue I2C IIC Serial 128X64 OLED Display . Uses (1) 10mm M3 screw for…
Managed to get this to work, which was cool. Main and tail rotor gearlinked, 1:2 ratio. Print in whatever, this one in PETG. A 608 bearing would be desirable for the pedestal, the other 4 could be 608s, but I used the printed…
I did not found a good morse code lookup table to be printed, so I made my own as a multi color print. Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations,…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to 3D Print and/or Laser cut an ESP32 WiFi connected Weather Forecasting Theatre with E-ink Display. Meet WeatherBot, my WiFi…
Wind vane attachment for WeatherFlow's WEATHERmeter . A single 608 bearing (22mm x 8mm x 7mm) required for assembly. Base has standard ¼-20 threading for tripod mount. There are two base models, one where the top peg (that goes into the…
Info fits 6 tamiya panel line accent color (40ml) or tamiya 40ml square bottle fit 1 tamiya weathering master Print instructions Filament material: Any type should be ok Layer Height: 0.2-0.3 Infill: 10% or more Supports: yes Credit goes…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
A 3D printable version of the Ford charge port weather kit. As with all things stored in a vehicle, make sure to use a material that can withstand the temperatures. I like ASA for these things.
Update 04/02/24 Thanks to @ScruffyOrc_217627 we found that can be an issue with the anemometer bowl connection with the holder, it can be a fitting issue. Nothing difficult! Just refile it a bit with a cutter! Update 31/01/24 I started…
Lesson Plan and Activity As the final project for Introduction to Engineering Design, I was given the choice of what I wanted to do. I really enjoyed making print-in-place telescoping fidgets earlier in the year, so I wanted to revisit…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
Dimensionally accurate design that can be printed and used without any painting or post processing. Switch body printed in matte dark grey PLA, though can be printed in any colour and painted Body printed with 0.15 layer height, 100%…
Korouhvička s ložisky. Body-B tisknout full z důvodu přibližného vyvážené s Blade. Blade tisknout 0.2 mm vrstvy, 4 spodní a 4 vrchní a mezi nimi výplň 40%. Blade a Body-B lepit. Stejně tak Body-A a lopatky. Použit šroub M8x100 (zkrácen na…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
WiFi Weather Station with 8Bit Icons and SFX Print instructions https://youtu.be/4wi6VRrWtLw WiFi Weather Station with 8Bit Icons and SFX. Build a weather station with retro inspired 8bit graphics! Use CircuitPython to display data from…
3D reconstruction of Luke Marzen's wooden model for the ESP32 weather station with a paper ink display. You can get the introduction here: https://github.com/lmarzen/esp32-weather-epd/ 2023/11/26: Updated the case to center the display…
Elevate Your Weather Station with a Custom Radiation Shield Introduction: Upgrade your weather station setup with a specially crafted radiation shield, designed to optimize sensor performance and accuracy. This single-piece solution…
A screw mountable Anderson Plug Weather Cover for caravans and outdoor applications. Available for 1, 2, or 3 Anderson Plugs to be mounted with 4 screws in the mounting holes. Can also be siliconed along the interacting face for a better…
I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.
ESP32 E-Paper Weather Display This is an enclosure for the project ESP32 E-Paper Weather Display . Overview I found the ESP32 E-Paper Weather Display project on GitHub and wanted an enclosure to more closely resemble devices like the Nest…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
The is a Stevenson Screen that I designed for my Arduino based weather station. The top is designed to install M3 brass threaded inserts. On mine I printed 2 middle sections and a top and bottom to make my screen. I used M3x65mm screws to…
Printed with ASA at 0.2mm Quality. Threads will be tight on first installation, several installs and removals will loosen them up.
These parts were inspired from a design by KeeganBuilds (YouTube). I modeled these parts in OpenSCAD to fit the components from a 2 kW diesel heater kit and have included the .SCAD files below so others can modify to fit heaters with…
I have been working on this project since November 2017 and have been enjoying it so much that it is time to share it. Features include: Accurate Clock refresh off Internet Time Servers Local Weather and conditions (refreshed every 10 -…
I wanted to create a procedurally-generated terrain map on a globe, using OpenSCAD. I'll get around to the globe eventually. First I had to get the procedural terrain generation to work, and then the weathering/erosion algorithm. This is…
I have created a 3d printed version of the display stand used to create the brilliant esp32 weather display by Imarzen. Link to the project (not created by me) is here: https://www.hackster.io/lmarzen/esp32-e-paper-weather-display-a2f444…
A station that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent and some brushes
Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…
Here's my version of Tony Stark's MK 1 Iron Man helmet. This is a clean undamaged version, I'm working on a battleworn version. I'd scale it 360% to be full size. Be sure to check out my other models. Category: Props
Weather protection cover for our door bell button. Could be used for a various number of door bell senders with similar size. You might have to drill corresponding holes in the mount socket for the sender. I've originally posted that…
Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…
Update 15 jan. 25 updated SM error corrected Update 20 nov. 24 added SM, L and XL model I am an avid archer, archery-coach and -trainer. I shot many styles of bows (recreational and competitive) but mainly stick to barebow. Wisdom comes…
This is a weather radiation shield for Pimoroni BME680 Breakout board. The Bosch BME680 gives you precise measurement of temperature, humidity, pressure, air quality index, bVOC and CO2 equivalent in the air and offers easy integration…
This free 3D model is based on Dorothy , the iconic weather research device from the 1996 film Twister . In the movie, storm chasers use Dorothy to deploy hundreds of small sensors into a tornado, hoping to study its inner workings and…
Case to hold a completed build of Luke Marzen's ESP32 E-Paper Weather Display found on github here: https://github.com/lmarzen/esp32-weather-epd/ If you follow lmarzen's instructions on github you'll need this case to hold: a 7.5" E Ink…
This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…
Weather station housing for sensor. Features slideable door with 45 degree vents to ensure no water or rain makes it into housing. Can house sensor of max size 65x108x38 mm. Support You can support me by liking and downloading my projects…
SD card holder and all PCB connectors pins have to be desoldered from screen. Also I'm using USB type C instead of micro USB connector which is on Wemos board. You can print Stand.stl if you want to have it on the desk. Or you can print…
Weatherproof with printable seal. Use TPU for the seal to make it weatherproof. Can be used without seal also. Made for 20mm cable gland and 4x M4 screws for the lid. I used PETG without fan and without support
Customized nameplates for the Apache weatherproof protective cases from Harbor Freight or Strongway from Northern Tool. This is a replacement for the plastic piece located near the handle. Its angled edges make it easy to secure in place…
A weatherproof enclosure for mounting your Ring sensor outside in the elements. This is for the 2nd generation sensors. I printed mine in PTEG to be more durable when exposed to the sun. Use a piece of TPU filament for the seal. If you…
HO Scale model of the Lehigh Valley Station in Weatherly PA. The roof and windows are accurate to how it looked as it operated as a station and were taken from a postcard dated 1911. You will probably need to cut some pieces into smaller…
It's important to keep bird droppings from getting into the rain collection funnel of your weather station, so bird spikes are an important addition. This spike ring is designed to fit funnels that have a 118mm outside diameter, which…
This is a case for a ESP32-powered weather display detailed in this project. The mount tray should be printed with supports, everything else without. 0.2 mm layer height. You will also need: Code and hardware detailed in this github repo…
Needed: 1 X 6700RS bearing [10 x 15 x 4 mm] 2 X M3 countersunk bolts with nuts
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
This was designed to fit a John Lewis Photo Frame & Mount, 4 x 6" (10 x 15cm) https://www.johnlewis.com/john-lewis-photo-frame-mount/natural/p4287425?size=4-x-6-inch-10-x-15cm The frame is actually 22.7 x 17.6 x 2cm and the design has…
This is a weatherproof (or waterproof depending on the version) case for a RAK19003 based Meshtatic node. Since the RAK19003 includes a Li-ion charging circuit and solar panel input port, the cases have room for a 2000mAh Li-ion battery…
Webasto/Eberspacher heater hull air inlet grill for the 90mm pipe. A unit with 3mm thick face plate added Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 0% Category: Sport & Outdoors
Weather vane 2. Printed form PETG. Need 2x screw M8x100, 3x lock nut M8 and 4x bearings 608ZZ (ABEC for in line - bought in sport shop). All parts printed full infil (better for point of gravity) with 3 perimeters and 0,2 mm layers. Part…
To build the Stevenson screen, you need : Stevenson screen : 1x bottom Nx cup to reach the desired height (7 for me) 1x top1 1x top2 Base : 1x base 1x PcbHolder and PcbCover 1x ExtensionArm, SolarCellHolder 1x SmaHolder (if you use an…
Weather vane to determine wind direction. To fit AS5600 magnetic rotation sensor and 608Z bearing. Hub is made up of four parts: -Cap to hold bearing -Body to house AS5600 sensor -Base to attach to substrate with hole for cable -Cover to…
Used to mount a Kestrel 5700 to a tripod for continuous wind adjustments. Kestrel slots into hold and hold securely, also has a hole on the bottom to route a string where the attachment point is on the Kestrel. Uses a 608 2RS bearing.
Not fully tested! Time will determine how well this model holds up. Model has spaces included for a battery and solar charger but I ended up not using these. Model was originally designed to use the sparkfun micromod weather carrier…
Add some epic ro your garden with this weather vane in the shape of a medieval dragon holding a flower. The flower is also a functional windmill. This weather vane is meant to be installed on a wooden pole. The model in the picture was…
Frame design for the E-Ink weather station https://www.hackster.io/lmarzen/esp32-e-paper-weather-display-a2f444
This is a simple Weathervane for Kestrel 5700 Fully inspired by https://www.thingiverse.com/thing:2444368 changed to use cheaper and highly available materials. Changes: Hole is designer for 6mm x 6mm stick (highly available in my area)…
Anemometer Cup and what I call the center dome for the home weather station. The center dome holds the bearing and magnet for triggering the reed switch for measuring wind speed. (Mine is an old Lacrosse Technology from more than ten…
UTP/FTP Rubber Grommet Weather Seal for outdoor Security Camera / Junction Box The cut is thinner than the standard nozzle diameter, so you may need to use a cutter after the print is done. Use flex filament. Tested on a Hikvision…
Video of this project working: This enclosure is intended to hold a PN532 NFC reader along with a Raspberry Pi Zero 2 W for the purpose of reading an Apple HomeKey to unlock or open a door. I'm running the software found here and…
Please let me know if you have any trouble with this! This was a first attempt there are definitely things to improve, so remixes welcome! I have not had a chance to test in different wind conditions, so YMMV! Printing: Consider adding…
This page and the models are a work in progress, I have some other versions of the models I'd like to add and there are some details I'd like to add to this page. To-Do List Add file name explanations Add BOMs for various versions Add…
Version 2 is available now! Outdoor Weather Station based on ESP32 and BME 280 Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm). It has an arm to hold the…
A station and organizer that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent, six brushes and a ink pen. Included are .stl, .3mf and two print files, one in PLA and other in PETG. Enjoy organizing.
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
A weather vane with an integrated decorative toroidal windmill. Needs a couple of 608 bearings. Designed to strap to a fence post with a couple of tie wraps. I printed all four pieces with supports using PLA+ and it has been happily…
This is a box for meteorological instruments (such as a thermometer or a hygrometer) that protects them from sunlight, water, snow, and strong winds. This box is based on a prior design I made and uploaded here . After days of frustration…
Eve Weather Mount with 7mm distance to the wall for better air circulation. You can use screws or adhesive strips for mounting. I used 2x Spax-Screws 3x25 in my case. I printed it with Prusa PETG Jet Black but only with 240°C to prevent…
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
Small weather station - radiation shield for placing the WEMOD D1 mine module and any sensor in my case MPE280.
This is a complete case for the amazing github project https://github.com/lmarzen/esp32-weather-epd You can use a 7.5" e-paper display from Waveshare or GooDisplay, both have the same size. I've added an Firebeetle ESP32 with HAT and a…
I recently installed an external CCTV camera under a gutter (Eufy 2c Pro in this case). Despite its semi-protected position, I designed a weather cover/hood to provide more protection from the elements. I've created two versions. A…
This was made to mount a post/pole to the side of something. I used it to mount my weather station (AcuRite 01536) to a fence. The diameter of the pole I used was 26mm. Because I knew it was going to take a ton of plastic and I didn't…
This is the UPDATED VERSION (Jan. 2021) of the popular ESP32 Weather Station Case! Changes: improved case design: hole for micro USB for charging and indicator LED improved design of the back cover This is a case designed for 4.2" E-Paper…
Printable without supports, prefarable in white material (PETG) Should be sufficient for reliable shielding of sun. Lots of vents that no heated air could accumulate. Glue together with superglue or with soemthing like UHU-Foam. (at least…
This is a remix of the case from Thing 3996613 by dimock . With the exception of the battery, I used the components listed in dimock's description. I also do not use the optional push button listed there. Instead, I make use of the button…
Scale Model of the WSR-88D NEXRAD Radar dish and pedistal. Model was done in Fusion 360 using drawings from the techmanual. Some parts have been scaled up to allow 3D printing. my printer was pretty small back in 2018, so I printed each…
It can be printed with 0.2mm layer height and with no supports, no need to rotate the models. Remove both the sensor and magnet from their original cases. Keep the screws holding the sensor PCB to the case as they will be used later. Push…
