Liczymy pasujące modele…
Various Brio train tracks and switches Lots of track study and design for the joy of the kids :-) Thought I'd make it publicly available to play with. Let me know if you need another one, a combination, a female only track and so on! If…
Witches' Cauldron Yarn Bowl
share your opinion in the comments!
An OEM profile keycap that clearly marks an exit.** Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650 **Not just for Semiologists! Print instructions 80% infill 4 shells…
New stl. files upload more straight kutting Print settings. LH: 0.2 Nz: 0.6/0.4 Sp: yes on build plate only NOT FOR USE WITH CANDLES ONLY WITH BATTERY LIGHT Pla used. Smartfil recycled from Smart Materials. Orange Purple
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
If you love fidget toys and keyboards, just one of those things, or simply want something quick to finish your filament spool, this is the model for you. I designed this fidget switch toy that only needs 1 to 3 mechanical keyboard…
Or wizards maybe? Either way they are CUTE! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Sky Team swtiches (toggles) upgrades. Sky team upgrade for the switches of the main board and for the fuel gauge (kerosine marker). Two styles of switches: Textured : With small dots on the surface of the swithces InversedTexture : With…
original page: https://www.thingiverse.com/thing:5224200 I made this remix because the original keycaps didn't fit onto my Kailh Box switches. I can recommend using PLA, since that worked for me very well. I've also tried PETG, it works,…
Witches Cauldron : Candy Pot
This is a 3D printable switch opener for Kailh Box Switches. Due to the orientation it should hold up well. Needs to be printed with 0.15mm layer height.
This is a simple organizer for testing keyboard switches. There are a few improvements that I made over the spartan version that my switch supplier provided. The "plate" area of the sockets is 1.5 mm thick, which is the correct size for…
This is an insert / organizer for Quacks of Quedlinburg, the full Herb Witches expansion, the locoweed recipe books and general fortune cards from the Alchemists expansion, the BGG GeekUp bits, and the BGG GeekUp bags. It has no lid lift,…
My wife is somewhat of a Halloween aficionado and is never really content with what she finds in stores decoration-wise, so it was my turn to make a witches' cauldron tailored perfectly to her needs… Designed this rather quickly with just…
I changed the design of my “Simple Cherry MX Keycap” to fit Gateron / Kailh switches. Thanks to @StilianMatev_1556778 for testing and printing the model.
An America light switch adapted fire alarm - The best of its kind, full optimized and tested, minimal supports needed There are a few others on the internet, however this is one of the few non-ai made ones, that was engineered by a .....…
All Parts like rings, lid and bowl separated and repaired for easy printing. All parts are separate STL file. All credits to original designer @3_D_Ideation .
A simple ‘duckbill’ style paddle designed for most kinds of miniature toggle switch with a 3mm diameter, >10mm length. Printing Guidelines Layer height: 0.1mm Supports: No Brim: No Walls: 2+ Infill: Any Depending on your printer and…
UPDATE: added 5pin support The tolerances between inserts and outside bodies may need an update based on how well our printer is calibrated. Print Settings : Filament tested : I used Pet-G, PLA does not matter layer height: 0.12mm-0.16mm…
Some 24 and 30mm button caps for both MX and Kailh Choc low profile switches. The rings are optional providing a more conventional look but also some extra "guide"for the buttons. The other caps are for 12x12 push buttons I strongly…
This is a simple enclosure designed to mount a button or switch. It is inspired by the typical style of industrial 22mm push button enclosures, but scaled down for a smaller button size. It is sized to fit M12 panel mount style switches.…
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
Print these how you like. Some say they have printed them upside down, but it's up to you. I prepare the keycaps as shown in this video: If that makes sense, I only print supports for the stem but not the rest of the body. I also create…
I designed these switches to add a custom touch to my clear SNES, but they look really good on a regular SNES, too! Print as shown in the pictures for best results. For the eject button add supports on the build plate only, and for the…
These are a variety of brio compatible switches, and they will work with most brands of wooden trains. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs.
I needed several of these and I needed to have them marked to tell which one went to which light so I remixed and added numbers to it. Remixed from. https://www.thingiverse.com/thing:2961055
A standalone filament pre-gate sensor that uses lever switches instead of the more typical ball bearings and switch approach. This sensor can be used both for the ERCF/Tradrack MMUs using Happy Hare, as well as a standalone filament…
I remade my model for Halloween, who knows, maybe I will even win the competition P.s. the overhangs its normal!
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Simple 2D wall art - Welcome Witches If necessary, you can set your own size. With a layer height of 0.2, you only need to respect the height of the Z axis (0.6 mm - 3 layers - only 0.4 mm - 2 layers is also possible). Feel free to change…
2 gang box is 4.5x4.5 cutout so conduit box can mount low current box cutout for single gang snap-in box
This is Version 2 of the IKEA Lack Printer Enclosure SwitchBox. One User asked to make some changes to the original Design and here we go. This design is made for 22mm Switches that require a 19mm hole. Version 1 can be found here:…
A cute simple witches cauldron fidget clicker that uses a keyboard switch. Perfect for stress relief! Insert a keyboard switch and place the bubbles ontop to click away! Check out my other designs! Keyboard switches found on Amazon…
// Here you can find my new project which also use parts from optical drive https://www.thingiverse.com/thing:5201443 This is upgrade of my previous version I posted here.I also added second actuator without external shaft.These models…
Retro Gaming Light Switch Covers Transform your standard wall switches into a nostalgic homage to classic gaming consoles. This project includes three interchangeable designs: the Nintendo NES D-pad, the Sega Master System D-pad, and the…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
This is a remix of The Quacks of Quedlinburg w/ The Herb Witches & The Alchemists Expansions - Insert by MordecaiHillsnipe . MAIN FEATURES (From Original) -No lid lift -Individual player trays -Supports both vertical and horizontal…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
Kailh Hot Swap Socket For Low Profile 1350 Chocolate Switches
Light switch plate w/ key hooks & wallet pocket
I wanted to design a box in the exact size of my stickers. Scaled to 120% it perfectly fits 110 switches or a keycap set
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
Thought it would be cool to make a keycap for my cherry mx keyboard. I've gone and tested this keycap on my Corsair K63 Wireless Keyboard. Light supports are required for the keycap. Commercial License available on my Patreon for selling…
Here are left and righthand track switches with spring-loaded manually switched positions. These are for use with the Hume track system. See https://www.printables.com/model/902291-snap-together-gauge-1-model-railroad-track for the parent…
Switchpuller for CherryMX switches. Prints fast and is sufficiently rigid while slim enough to not collide with neighboring switches. Adjacent keycaps have to come off for it to fit. Print with a 0.4mm nozzle and manually place the seam…
Based on Void's corne case. Modified to fit 750mah battery vertically and 1200mah horizontally. I used a LP-503562 with 1200mAh in the end. Battery should not be taller than 5mm. Increased PCB height slightly to make space for kailh…
Witches Cauldron with magical symbols
Recently I bought a new Ducky One 2 SF keyboard. I just love the Cherry MX switches and the exchangable keycaps. Of course I need to make some keycaps myself. So I made a Panic-key and an Any-Key. The Panic-key is a replacement for the…
Here are left and righthand track switches with spring-loaded manually switched positions. These are for use with the Hume track system. See https://www.printables.com/model/902291-snap-together-gauge-1-model-railroad-track for the parent…
The model named Plate will need supports. Both of the switch pieces need to be printed twice. (untested)
A press fit box for 3 switches. I used 3 different springs.
Modified the LCD cover so you can fit one to three switches there to control lights, a raspberry or something else. I used the following switches and potentiometers:…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
I got the cheap limit switches off Amazon ( https://www.amazon.com/Genmitsu-Micro-Switches-3018-PROVer-3018-MX3/dp/B08P1D6WTR ) I was disappointed to discover that there was not a coherent setup for mounting them available at large. So I…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
I designed these switch covers to allow for visual confirmation that each rocker switch is in the correct position. For switches that should never be moved, the “Level 3” guard ensures that the switch is only accessible from the…
❤❤❤ Hello :) Another fast project for my children. After Magic Star Wand ( https://www.printables.com/model/1022673-magic-star-wand-for-princesses-witches-and-fairies ) I decided to make another one. This time with heart ❤❤❤ Wand can be…
Drag lid away from cauldron in slicer. Print cauldron upside down - support handles. Print lid separate - right side up, support the brim.
A keycap for Cherry MX RGB Switches, which can be illuminated through an insert. I've printed the keycap in matte black PETG with my Prusa MK3S and the insert with clear resin, but it should work with translucent filaments as well. I've…
Are you a keyboard nerd with at least 22 extra MX-style switches? Do you fidget? Then print this. Switches and keycaps not included in the print. Sorry :( That is all.
I have a 3 and a 4 switches version and used 250 volt switches because I needed to switch 230 volt and 12 volt. For extra precaution i've used heat shrink tubes and extra dividers between the switches. The safety flips have been added…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
I was looking for rackmount brackets / ears for an old HPE Switch which has a 30 x 30 pattern for M4 screws and all I could find were models with 25 mm distance. After printing a first draft, turns out 29 mm fits even better so I included…
Halloween Witches Cauldron candy bowl, decorated with webs, spiders, stars and bats. Easy to scale/print to any size you need. A Witches hat lid is also provided (3 parts) for no support printing as the lid is contoured to match the…
Press Like for encouragement. Comment for improvement. Custom hat switches to make your Virpil grip become your very own Virpil grip. I recommend using a resin printer, or a FDM printer with a small nozzle, due to the size and the…
Fast project for my children. Wand can be printed even on 18 cm x 18 cm table printers, like Prusa mini, A1 mini. I used 0,4 nozzle, 0,2 layer height and ironing option. I also used 10% infill with gyroid shape. Around 8 grams of filament.
The opening to fit the switch in these models is nominally 3.7 mm but shrinks a little on my machine, presumably elephant's foot. I include the Fusion 360 file which has parameters for length and inner diameter so you can customize to…
Never pay for switch films again. Prusa Silcer gives a disclaimer that this model is in imperial this is wrong. Click NO on the dialogue box in order to get the correct size. These films were deigned using the dimensions of deskeys switch…
Mechanical keyboards and key switches can be expensive and what happens when just one breaks? You have to throw out the whole keyboard! What if you could print your own key switches instead for like $0.04 each? When one wears out (after a…
I was fed up with seeing cable clutter and plug bars, so I made this 'box' to mount a KCD3 Rocker Switch under my desk. That way I can easily switch on my gear (e.g. computer monitors, speakers) when I need it. Update: I also made a…
Time to extend the DIY-viaduct with points/switches and to add DIY-signals! See pictures for more information. Here the advantage of possible cable routing inside the DIY-Viaduct for Kato’s Unitrack comes to the light. For viaducts and…
KOA (XDA-ish) Profile Keyboard Keycap for Cherry MX stem Switches. The shape is based on the KOA profile from KBDiy brand keycaps. Keycap is customizable further for many different options using just slicer settings. Very sandable and…
This is a remix of the excellent model by js500 that also holds the full Alchemists expansion. I regularly play with the expansion and wanted to store everything Quacks in a single box. The organizer holds the Quacks of Quedlinburg base…
Consider this a first revision of a keycap design i have been working on. I have found it necessary to begin anew with the knowledge from this version. Print Settings Printer: Ormerod 2 528.4 Supports: Yes Resolution: 0.1mm Infill: n/a…
Sometimes, dust and debris work their way into a keyboard key switch, causing the switch to be 'sticky' or to repeat key strokes. You can try to blow out the mechanism, but most blower nozzles are too big and they will not depress the…
When one costume comes with a wand and the other doesn't, my little witches will complain. Modeled after the wand that came in the costume so there would be no arguing over which witch's wand was wonderful! print with long side down…
Bring a touch of magic to your next project with the Potion Bottles Collection from RogueCmdr3D! Three unique designs with customizable stoppers make these perfect for Halloween, Valentine’s Day, or any occasion needing a little extra…
Malerabdeckung für Steckdosen Schalter, Thermostate. Einfach Rahmen demontieren und die Magnetische Abdeckung aufsetzen. Diese passt perfekt für Steckdosen und Schalter von Busch Jäger. Benötigt werden 12 Magnete 5mm x 1,6mm bestellt bei…
This thing - selfmade hotswap socket for handwiring keyboard on Gateron or Ketchron low profile switches. Support for optional RGB led (SK2812 mini) installation. I am used it for make Corne v3 - based Cornedion…
Remix of Wissencat's Meowburner, The Puurrfect Stealthburner (Which is awesome) mixed with https://github.com/EtteGit/EnragedRabbitProject/tree/main/usermods/CW2_with_ECAS_and_optional_sensor by GarthSnyder to use ECAS as well as…
Flat top keycaps. .ipt file is included in case you want to modify the tolerances
For the third-gen Tundra's center console. This is for Carling switches, I will add another version for the Toyota smaller push switches as well. Stay tuned. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports:…
Print in TPU. Add Button 16mm.
New design. For X20 & X20S Gimbal protector. It is also protecting the switches & potensiometer. Printed also in GLOW IN THE DARK PLA. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Filament:…
I used .5"x.75" switches to add quick, front shut offs to the LED and the printer. The back power switch was hard to reach.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Wanted to route some of the on/off switches to the front of the carbon so I modified Magedark's screen cover to add 1-3 toggle switch spots and used harrisonpatm's Micro USB DIP breakout to add a power input and spot. It's possible a USB…
Note that the X limit switch is triggering on the extruder body, it was designed for use with a stealthburner extruder, if you can a different extruder you will need to verify that it triggers on the extruder, and please do so before you…
The Y endswitch holder was the only part of Ghruum's collection that I could use for my Vevor 3018 CNC. Fortunately, he provided a STEP file, so I could isolate it from the other parts. I also added a new actuator wing. The whole design…
This is a new top and bottom case that are compatible with the Raspberry pi 4 to go with the original https://www.thingiverse.com/thing:2508409 This is posted with permission from the original author. Please check out their retro console…
Don't forget to like and comment. Material: 3x safety switch (hole diameter is 12mm) When combined with one another models of this collection mimic the functionalities of the instrument panels found in most aircraft (helicopter, fighter…
These print best on resin printers, and they are very thin. Maybe too thin… I'd recommend ‘abs-like’ for less brittleness. I've tried printing on my Creality CR10 S Pro V2 with a Hemera direct drive extruder and volcano hot end. Not good.
A remix of the original orbiter filament sensor that uses a 6mm steelball and a standard microswitch.
This stackable Gridfinity bin can store a keyswitch tester set such as the Gateron Keyswitch Tester (35pcs). This bin store 36 keyswitches in total. Settings Tested with the following: Original Prusa MK4S 0.4 mm Nozzle 0.2 mm height…
I needed a simple 2u DSA spacebar for my ortholinear board and didn't have access to any at the time so I just designed and 3d printed one! This is designed with extra stems so it can be used with standard mechanical keyboard stabilizers…
Cursed Halloween Witches Hat
![Quacks of Quedlinburg + Herb Witches + Alchemists Expansion Storage Organizer Insert [REMIX]](https://media.printables.com/media/prints/312728/images/2723000_0f37e5bc-88c8-4632-8ba2-1e86715f49fa/img_2955.jpg)
