262 modeli
Edit: Definitely check out the remixes if you’re considering printing my model. There are two improved versions that look pretty decent! :) small keychain for an exacto knife blade. easy to print with a 0.5 mm gap in mechanism. Screws in…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
Box for airgun pellets in the shape of JSB Exact Diabolo. The box can hold approximately 200 pcs of airgun pellets.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of xacto knife cap by kitlaan . If you use knife pen with 10mm diameter, this may work for you as well.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a riser frame for Schneider Electric Exxact 4-way socket-outlet. Part: WDE002488 Frame is 12mm thick, hole is 10mm. Print instructions I printed this in white PETG. Unfortunately the white shade was not correct.
Wydruk około 1,77 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model of JSB Exact shooting pellet.
Wydruk około 1,89 €–2,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho Ho Ho - Happy Holidays 2025. Replace your gas cooktop stove knobs in festive colors for an added over the top decoration. or... Replace your broken Dacor gas cooktop stove knob. We tried the replacements on Amazon, but they are huge…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pictures tell the story - use this to nicely integrate Philips Hue Dimmer Switch to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original Schneider Exxact components: Button, part that…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pictures tell the story - use this to nicely integrate Philips Hue Smart button to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original button from the light switch by pulling. Use…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got asked if I had a model for the spill guards for a Dacor Gas range. Since I had previously published the file for the Dacor Gas range knob set, I decided to make a model so you can print your own spill guards. Dacor no longer makes…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Download now the V3 version: https://www.printables.com/model/631805-x-acto-minicutter-v3 This is a small cutter to always carry close on your keychain, in a backpack pocket or in your pencil case. It only uses the popular X-Acto 11…
Prints properly (enough) with 0.2mm layer, as oriented. The cap fits knife with 8.0mm diameter holder (8.3mm diameter knurling). The first few cappings are tight, but it smooths out with a nice “click”. When capping/removing, hold where…
After many months of testing I present the magnetic action exacto knife, great little tool for arts and crafts, opening boxes and also fun as a fidget toy (use responsible ;) ) You will need three 5x2mm magnets which will need to be glued…
A revamped version of the Xacto blade minicutter Keychain. The model is now slimmer, slightly longer (to avoid the blade tip sticking out) and has been rounded to make it more comfortable to hold. The model is designed for Xacto n11…
This is a 1:1 recreation of the GameCube shell top. more parts of the GameCube on the way. this is about 98% accurate but will fit OEM parts as well. I've included 2 types of the shell one with and one without the vent sides so you can…
This is a 1:1 recreation of the GameCube Bottom Shell top. more parts of the GameCube on the way. this is about 90% accurate but will fit OEM parts as well. I can't guarantee that a Gameboy player and modem adapter will fit since i do not…
This is a 1:1 recreation of the GameCube Controller Plate Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes…
I had tried multiple of my own ideas in an attempt to solve a couple issues with my V2 design, but EasyT2022 on Thingiverse already remixed a great one! I took his idea and just adapted it to my original model. I made two versions, with…
This is a 1:1 recreation of the GameCube Drive Door Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. this does fit OEM Top Jewels. Print Settings Printer Brand: Creality Printer:…
Resized for common affordable exacto knifes found in Europe, anywhere from hardware stores to Aldi.
Designed to fit #11 HOBBY / XACTO type blades. ***XACTO BRAND SPECIFIC DESIGNS JUST ADDED BE SURE TO CHECK YOUR BLADE MEASUREMENTS FOR THE PROPER FILES*** No supports needed. No hardware needed. Recommend printing at 0.1mm or 0.08mm when…
Holds an x-acto knife point-down without a cap for easy grabbing! Optionally holds this blade holder: https://www.amazon.com/gp/product/B00004Z2U0/
These linear rail MGN12 and the block MGN12H objects with exact dimensions, are intended as help tools in prototyping and designing. There are 2 types of rails, one without holes, that can be elongated/stretched to any desired length by…
PLEASE LIKE AND RATE IT IF YOU ENJOY IT THAT WILL MOTIVATE ME TO MAKE A V4 (Updated design August 2024 with a complete redesign of all 8 pieces) This is my initial prototype of a spring-loaded pocket knife with an X-Acto blade, designed…
Update 8/18/21 V2.5 is out, which I believe to be even better than the V2: https://www.prusaprinters.org/prints/74193-v25-better-xacto-knife-handle Update 2/25/21: I changed the design a little bit so that the small part that the blade is…
Printed with adaptive layers (.3mm +/- .1mm) with a .6 CHT nozzle. Wall count/infill specs aren't particularly important, use your best judgement. I did 4 walls/10% gyroid. My knives are two different sizes and the spare blades came in…
The original design by @Magmabow is a fantastic design but i had trouble printing it with my 0.6mm nozzle. as such, this project was born. Includes a slide safety. Uses M3x8 screws and nuts (x2). no glue required.
I have provided an instruction PDF on how to print and assembly the knife in the other files section. I hope you enjoy my design for a small double action, out the front knife. This does not need any supports. Any needed brims are built…
Cap for an ExactoKnife with a diameter of 11mm. Takes about 20 minutes to print at 0.2 layer height.
Thin Hobby Xacto Knife Features compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces better threads for best…
Handle designed to hold scalpel blades, but also holds Xacto blades No supports needed, but good bed adhesion is important.
I have included blades that can be found on Temu and originals also. Features: No slip of the blade Easy Swapping of blades Easy to print Fast Print <10min Comes with protective cover for personal carrying Only Two Parts How to use is…
I took another pass at a revised blade cover for Unicorn Hatmaker's Xacto Blade holder , this one is intended to fit snugly, maybe even tightly, and doesn't take as much material to print. I dare say it's significantly more refined than…
100% as in the series, unlike the others. Print settings: The model is designed for printing with the parameters. All layers 0.1 mm Nozzle 0.4 Filling 100%. To glue evenly, insert a piece of filament 4-6 mm. Print 5 (stones) 1 square, 2…
4040 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
I have a lot of picks, tweezers, files, and exacto knives. I wanted them to have a place but also have the most frequent ones easily accessible. Behold the 5 bay, stackable, pick, file, exacto, sharpie, tweezer storage. Stackable. 4…
Hobby Xacto Knife with Blade Container Features blade container interchangeable handles compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the…
Update 8/18/21 V2.5 is out, which I believe to be even better than the V2: https://www.prusaprinters.org/prints/74193-v25-better-xacto-knife-handle These handles compensate for an Xacto blade's angle, making the cutting edge parallel with…
Yet another xacto knife blade cover. I designed this one specifically for: Printing lying flat on the bed, with no support A mechanism to tightly hold on to the blade A slope/index on the cover, so I know which way the blade is facing and…
I wasn't finding any hobby knife holders for the Honeycomb Storage Wall. While at my desk I was using a Sharpie and noticed it was about the same diameter as the Fiskars hobby knife. I took Akinayr's Sharpie holder and removed all but 1…
Features: Includes 2 model files: Handle and Sheath . Easy to assemble: Simply push a standard exacto knife blade into the slot for a snug fit. Compatible with standard exacto knife blades. Optional: Attach a keychain ring for…
Needed a holder for my stanley exacto knife.
ESP32-CAM 3D object with exact dimensions for mock-up purposes and prototyping Category: Props
Retractable Xacto Knife Features compact with retractable blade compatible with no10 and no11 blade Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces…
Simple design for a relatively small 3D printed knife that uses an Xacto Blade. Superglue is likely necessary to reliably hold the blade in place for frequent uses. Only 3 pieces, with a variation to have the keychain ring go through the…
a cool mecha melon figure in the T pose see the sizes on one of the fotos would be nice if you do a small rewiew
This 3D model is a specially designed hook attachment for a Lifetime® Tool Shed. It is sturdy and extremely durable and made to hold many tools safely. The hook can be easily attached to the shed wall slots, helping to keep tools…
**Updated** I printed it then realized I have exactos with long covers and were a little hard to pull out so I made 2 version one for short and long covers and extended the aread to make it easier to pull out the exacto Remixed the…
Blades could be a bit better organized, but I did not want to use more space, this uses a 4x2 grid.
A multiboard compatible scalpel/xacto knife + spare blade holder. There is a tight fit (not all brands might fit in there) and a loose fit (+1mm tolerance on all sides). I've printed mine out of PLA with a 0.6mm nozzle at 0.3mm layer…
This Grid is fitting an ALEX drawer completely.
Internal magnets inserted mid print using a M1 command to pause magnets used are 5mm x 2.5mm prints in place with a 0.4mm tolerance gold boarder is printed using prusaslicers multi-material single extruder mode
This is a scalpel with a hidden blade , with the popular X-Acto 11 blades but you can adapt to others. It is quick and easy to print. It is normal that at first the adjustments are a bit hard, with use they soften. Left hand too.
1x4x2 Gridfinity bit fitting two exacto knifes
this is a remix of the Exacto knife keychain by Michel Bauer . I really like his design but I'm a fat-fingered klutz and needed something with longer handle. I moved the eyelet from the blade handle to the base of the sheath and added a…
For cleaning up parts post-printing with an X-acto knife I often am holding the handle in my four fingers and using my thumb to push the part against the blade, this allows for finer control when cleaning (i.e., cleaning brims) and…
It's a small and useful pocket knife that uses the Xacto T11 blade. Let me know if there are any issues and I will fix them as soon as possible. Model moved to makerworld: https://makerworld.com/en/models/828507-xacto-pocket-knife
Small case for holding 100 No 11 Exacto blades. Prints without supports, PLA or PETG, 0.20 layer height or better
KP08 bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
This is a remix of a 1x1 gridfinity bin to hold an exacto knife and extra blades. It can hold everything from a set like this. https://amzn.to/44P9yTJ
The original is the best looking X-acto storage holder, I think. I just added HSW connectors so you can use it on your honeycomb wall.
So this is pretty straight forward. I suggest printing vertically for best results. That said, I have noticed that Xacto knife diameters are NOT consistent. I have one which measures 8.25mm at the top edge of the knurled handle and…
This is a slim retractable keychain for xacto hobby knife blades. I use Stanley Blades, other brands may differ a bit with dimensions and format. This is a remix from DoopyWoppy Z11 Blade Keychain Knife. Since I'm left handed I remade the…
Not round to descurage rolling.
This is an exact replica of the Lego style lightsaber. I made it to the exact measurements and you can scale it up to any size that you desire.
The insert of my Xacto knife broke (see photo). First I wanted to buy a new holder, then I decided to print a replacement. The model was quickly made in Fusion 360. I printed it with 0.1 mm resolution and in PETG. Although the M5 thread…
A simple Xacto knife holder for the honeycomb storage wall. Has a little indicator on side to tell you which way to orient the blade. I was able to print in this orientation without supports.
This is a Gridfinity module designed for Zack Freedman's Gridfinity system. It holds 1 sharpie, 1 exacto knife, and a lot of extra blades. I printed this at .20mm layer height with 15% infill.
Keep your crafting blade sheathed nearby for Ninja attacks or needed crafts. Updated magnet hole eliminates post-print cleanup. Optionally holds this blade holder: https://www.amazon.com/gp/product/B00004Z2U0/
UPDATE 16.05.2025: Some files were corrupted. These have been updated now.
This is basically the exact same model as Propaganda 's Deburring Gridfinity module , but tweaked to hold my generic hobby knifes which have thinner handles (8mm) vs the original model which has more of a 12mm hole. Note, this was such a…
2020 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
Replacement insert (sacrificial board) for METABO KGSV 72 Xact SYM crosscut miter saw. As a spare part or as a tuning, because: No sacrificial board required in contrast to the original, a tear-free saw cut as this insert is closed.…
775 motor object with exact dimensions meant for prototyping and mock-ups Category: Props
This is a functioning #2 xacto knife cap "with stand" Raft: Yes Support: No Infill: 5% Printed on a Longer lk5 pro with Sunlu clear transparent pla Nozzle temp: 200 Bed temp: 50 It will be snug at first. I just took the blade out and gave…
I wanted a holder to put my two most used cutting tools in one place. This was designed to fit the “AFA Tooling” deburring tool ( Amazon link ) and Fiskars clone of xacto knife ( Amazon link ). I find the Fiskars version more comfortable…
Two different variations of an Xacto knife holder that fits into 4x1 Gridfinity base. Has holes for magnets. See pictures. I printed on draft 0.24 layer height in PLA with 10% honeycomb infill. 2 top layers, 1 bottom layer. 2 wall loops…
Uses an M3 adapter to fit to the honey comb system
DF54 exactly indicator that uses the original screw. PETG printed with MMU3, but single exdruder also be fine :)
It's a much safer and convinient case that allows easy extraction. Compatible with the gridfinity refined ecosystem that also alows fixing it to the table. Aditionally, this is the link to the OnShape source project which will let you…
Friction cap for some Exacto knives. Prints without supports. PLA is best, but PETG also works. 0.20 layer height or better.
2040 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
Updates 1/23/25 ** Created/differentiated a square vs rectangular shape designs (they are sorted in folders below). If you print the square version, it may not complicate scaling issues for you if you find that you have them. I recommend…
Gridfinity Xacto Knife Holder for 5 knives and extra blades
Grip for Exacto handle print with TPU Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Filament: Duramatic TPU Black Notes: Grip for Exacto handle print with TPU Category: Hand Tools
I printed it in PLA with a 0.16mm layer height, 4 walls, 10% infill. No supports are needed. You should print it as it's oriented in the STL. You need good bed adhesion since the main body of the handle has a small contact patch and…
V1.3 Coming soon Cap and Fusion 360 file. V1.2 Coming Soon Working on the tolerance. V1.1 4/17/19 I updated the dimensions and the style of the exacto knife. Here are the changes… Collet 1) The thread is now 15mm long. It was 10mm before.…
Gridfinity storage bin for your exacto knives and blades, including a magentic blade pickup tool for safe handling of the sharp blades. Requires a 6x2 magnet to be inserted in the tool. I got my inspiration from this model:…
Schneider Exxact Dimmer Knob
parts required 1x twist top glass jar So quick, you don't even need to open the lid of the jar. Just tip the jar and dispense. 1) Tip the jar with the cover on. The straw will be filled with exactly one teaspoon of content and any excess…
Like the base model, I recommend to print this with non-tree supports to support the whole length of the hinge. Would you want to change the pattern significantly, I suggest going back to the base model ("Rugged Box (print-in-place &…
A set of JSB Exact pellet, pellet with modeled grooves and barrel blank. Dimensions are measured and may not reflect with the actual dimensions JSB Exact pellet. The pellet with modeled grooves should fit in the barrel blank, if not a…
Being a character with a low roll on dexterity, I found a way I could contribute to Unicorn Hatmaker's fantastic blade holder and make a cover that's a wee bit easier to put on. This cover is designed to fully enclose the top portion of…
🔹 Simple protective cover designed to snap over a standard hobby knife blade when the knife is not in use. 🔹 Helps prevent accidental cuts while protecting the blade edge during storage, transport, or while the knife is resting on the…
I really dislike holders with tools being in the “open” position or tools with the “tool end” exposed. Therefore I'm trying to create a few models for storing some of my commonly used tools which I haven't been able to find the models I…
This is an Xacto Knife Handle I designed loosely inspired by a design I can no longer find on any website. The cap requires bridging of around a centimeter, so sufficient cooling is recommended. Requires 1x M2.5x4 Countersunk Screw This…
A Gridfinity based holder for the excellently designed XACTO knife by SolidDorks . This allows up to 4 knives to be easily stored vertically. Gridfinity is an open storage system created by Zack Freedman.
Fits 8mm diameter xacto knife and 25mm pegboard. Print upright with supports
A simple remix of Drew's excellent model to support both of my most used design tools Here is the TinkerCAD link if you want to further modify the design: https://www.tinkercad.com/things/k0HsyWvG3AR-gridfinity-caliper-xacto-holder-v2
Xacto Knife tray insert for Gridfinity Rather than dedicating a 1x4 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try. The insert fits inside an 1x4, or can be used stand alone on your work surface. This two…
i made a useful compact keychain that Contain a very sharp x-acto blade 11 video of the model and how to install the v2 is 30% smaller than the v1 please tell me what you think? 🙏
![[REMIX] Xacto OTF Keychain mini V3.0](https://media.printables.com/media/prints/3aadbecf-62d3-4605-8569-0459c62afbf4/images/9674904_6a377821-e844-48d4-bb49-119ae7b8ce75_075f36fc-d66e-40c0-9199-dbf7b0056f67/bildschirmfoto_4-5-2025_163648_mediaprintablescom.jpeg)
