Wyniki wyszukiwania: z4

.22LR suppressor 1/2-20 1/2-28 Brno model 2 Cz452 Cz455 Cz457

Z42 Prusa Mini/ Mini Plus Narrow Side Spool Holder

For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…

BMW Z4 E85 Silhouette Wall Art

BMW Z4 E85 Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…

CZ457 12-Round Mag Extension - Follower Spring Adjustment Hole

Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…

HP Z440 Workstation Hdd Sled Caddy

Here I have a pretty basic model for inserting another HDD into the HP Z440 Workstation's drive bay. Unlike the default caddy, this one is friction fit as well as requires four drive screws instead of being toolless. Here is my tinkercad…

Z42 Prusa Mini Light Mount V2

A simple Light mount for the Prusa Mini that uses a simple USB light bar (links below). also includes a 3030 extrusion cover to cover the USB cord going down the Z axis extrusion. This version takes a bit longer to print because it allows…

Prusa MINI Z-axis support and Z42 Prusa Mini Narrow Side Spool Holder at one piece ( with extra Spool Stability support Model ) v2

A remix of https://www.prusaprinters.org/de/prints/42868 by Radmaster and https://www.prusaprinters.org/de/prints/41894 by Zelrick This is a mix as two pieces that i like on my Prusa Mini ;-) The pieces have the same position and cant use…

Arch Mage Female By MZ4250(Without the book)

I just took MZ4520's model and deleted the book

Z42 Prusa Mini/Mini+ Light Mount For LED Strips

This version of the Z42 Prusa Mini light mount is an evolution of the original and is designed to hold a LED light strip. You can wire your own or you can purchase a sewing machine light kit (USB, no soldering involved), install it and…

CZ457 synthetic cheek riser

Close your eyes, rest your head comfortably on the stock in a shooting position and open your eyes. What do you see? Are you looking directly into the scope or from below? When properly adjusted the cheek riser you should be looking…

DRZ400 Airbox to FCR39 Carburetor Adapter

I pulled the STL into onshape and tried my best to replicate it, but that isn't always easy. It fits exactly the same as the original, except with better clearance near the jets (see the photo of the original's clearance). V1.2 update:…

Récupérateur de douilles pour CZ457 LRP

Récupérateur de douilles pour CZ457 LRP 2 versions, une à "cliper" dessus, et une avec ressort. Pour la version à ressort, il vous faut, donc, un petit ressort, et coller ( ou visser M2 ) les pièces, Casings recuperator for CZ 457 LRP 2…

Samsung Galaxy Z Flip 5/6 Mount for BMW Z4 (E85/E86)

This is a phone holder for a Samsung Galaxy Z Flip 5/6 to allow you to take advantage of the cover screen in the folded position and use your favorite navigation and audio apps in a 2002-2008 BMW Z4. The mount is cut away on the sides to…

Z42 Prusa Mini Side Spool Holder Variable Height

For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. This version has a…

Oil Sump Drain Plug Cover Cap for BMW 3 Series (E46), Z4 (E85), Z4 (E86)

Original cover was warped, so i made a new one. v3 - fixed incorrect location of the hole for screw. v2 - after printing, noticed small reinforcements are no necessery and make cover warp. after removing them everything looks ok.

CZ457 Pro-Varmint Cheek Riser (Boyd Stock)

Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn…

60mm z440 ram cooler- clip on

Ram cooler with support for the Z440 stock ram fans. -Printed with PLA+ at 50% infill(a few extra grams compared to 10% so that's your call, I just wanted guaranteed stiffness) -Several revisions later and it's a tight fit with better…

voditko retezu YAMAHA YZ450F Chain Guard Guide Protector

voditko retezu YAMAHA YZF450 chain Category: Vehicles

CZ455 452 512 Magazine Baseplate

This is simply a baseplate for skinny CZ plastic magazines to make them easier to handle. It does not increase magazine capacity. It is a bit longer and taller than the model remixed from. I have included several versions. A basic one so…

BMW Z4 E89 Cup Holder Mod

I designed this model as a drop in replacement for the OE ash tray in my BMW E89 Z4. The shape accommodates cups/bottles as well as other odds and ends. Printed upright in 0.1mm PLA with 5 perimeters and 20% rectilinear infill. Organic…

HP Z440 (and similar) 5.25inch Drive Finned Bay Cover

Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…

Lithgow LA101/CZ457 Single Shot Adaptor. Should work for CZ457, 455 etc

LA101, CZ457 Single Shot Mag I use for Benchrest shooting with double feed ramps to lift and align bullet into chamber minimising contact to increase accuracy. Taken from my M14 adaptor grafted onto modified CZ mag to fit the LA101 or CZ.…

Alex Zahnrad Z42-M1-H8,5-SW8,6

Alex Zahnrad Z42-M1-H8,5-SW8,6 Die Kürzel heißen : 42 Zähne Modul 1 mm Höhe 8,5 mm Schlüssel weite der 6kt. Bohrung 8,6 mm Dies teil habe ich als Ersatzteil für einen Mini-Papier-Schredder für einen netten Kollegen kreiert.

Z42 Prusa Mini/ Mini Plus Wide Side Spool Holder

Reupload because I deleted it by mistake. For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament…

BMW Z4 (E89) double bottle holder for Yeti 12 / 18oz bottles

I recently purchased an E89 Z4 and noticed quickly that there isn't an obvious place to store a drinks bottle when out and about. I knocked up this quick model which can be velcro'd into place on the bottom. October 2024 updates. Now up…

DRZ400 Trail Tech Vapor Mount and Spedometer Cable Plug

DRZ400 mount for Trail Tech Vapor and OEM light bar. Uses factory mounting bracket and hardware. you will need a couple screws, washers, and nuts to mount the Vapor mount to the factory bracket. You'll also need to use your big brain to…

Key Tag BMW Z4 E85

Key tag in the shape of a BMW Z4 E85 phase 2

Logitech Z407 remote button extender

Tired of picking up your Logitech Z407 remote to switch audio sources? This print bring the buttons that are on the bottom of the Logitech Z407 Dial/Puck/Remote out to the front. Now you can just leave the remote on your desk. To…

Z42 Prusa Mini Narrow Side Spool Holder Adjustable Height

For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…

HP Workstation Z440 or Z240 Mesh DVD Drive Bay Cover 5.25in

This is a remix of this model with added ventilation holes for increased airflow. I use it with my HP z440 but it likely could fit similar models like the Z240. https://www.thingiverse.com/thing:4783713 My Tinkercad model:…

WIP - Z4 Double Din Adapter

This Adapter converts the e85 into a double din keeping vent functionallity. This is a work in progress. please feel free to remix and modify as there is still work to be done: Vent shape redesign Front facia redesign Vent back shape…

Logitech Z407 Low Profile Under-Shelf Speaker Mount

This is my design for Logitech Z407 speakers that allows low profile horizontal mounting of the speaker using the upright mount position. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15-25 Filament: Uzy Galaxy Black PLA

BMW z4 e85 e86 Abdeckung Scheinwerfer Reinigungsdüse

Easy to replace your Washer Cover. Print left or right side cover. Paint it. Pull out the Washer System with your fingers (that's the hardes part ^^). Slide on cover. Done.

Kulička natahovací páky CZ 457, Bolt knob CZ457

Kulička natahovací páky CZ 457, Bolt knob CZ457

Z42 Prusa MK3 Light Bar and Filament Guide

This is the current version of the LED light holder and filament guide that I've used on the MK3 for several years. Recently updated to use a simple sewing machine LED strip, so no soldering unless you really want to. Sewing machine LED…

Z42 Prusa Mini Steel Sheet Holder

When looking over all the sheet holders out there I noticed a missing style. So, I whipped up one with a smooth, curvy 50's vehicle vibe. Print instructions The print in the picture is printed in Prusament PETG Ultramarine Blue, .2 Layer…

Logitec Z407 Speaker - Monitor Nema holder

I have designed a speaker holder that connects Logitech Z407 speakers to Nema 100 holes. The speakers are simply attached to the holder. Finally, I used double-sided adhesive tape to ensure that the speakers are parallel to the monitor.…

Z440 IO Shield Backplate

This is an io shield for the Z440 motherboard. This is required if you recase your Z440 like I did. To get this to fit properly in my case i had to use some side cutter wire snips to trim the tabs slightly but it's otherwise a very nice…

ECI and Cold Bore Cap for CZ457 action and barrel

This is empty chamber indicator for CZ457 action and a cold bore cap for the barrel. Parts: (2) 6 x 3 mm round magnets for ECI (3) 6 x 2 mm round magnets for CAP (1) CAP (1) ECI

MZ4250 Remorhaz split with sturdy feet and neck

Joined feet so they don't break during removal from buildplate. Also added built-in connection between body and neck.

DRZ400 crankshaft balancing stand

Print the top near where the skate bearings mount with a modifier and 100% infill. The first balancing stand is actually untested, the 2nd balancing stand is tested, but if you push it the wrong way, without a lot of infill, it affects…

ECI for a CZ457 Action

This is a magnetic empty chamber indicator (ECI) for a CZ457 action. Has a hole to add a banner flag as required. Parts: (2) 6 x 3 mm round magnets (1) ECI Insert

HP Workstation DC7900 DC7800 8000 8100 Z400 Z600 HDD Disk 3,5" Brackets Screw

You lost your HP workstation mounting screws? Just print 4 of these :D It's not perfect, but it works :)

CZ457 Single Shot Sled

I do a lot of rimfire Benchrest. I have tried several single shot sleds yet none have really produced a positive result. I came across Steve's sled and printed it out. I like how the bullet sits within the sled as well as the angle in…

DVD Slim 10MM Slot Adapter for 2.5" SSD/HDD for HP Z440 Workstation

This is modified from the original with the following changes. Hole added to the side to mate with the pin of the screwless slim DVD bay of the Z440 case. PCB space modified to hold the PCB from a different brand of thicker 14mm adapter.…

DRZ400E Dash

I used Corwell CNC to have it cut out of carbon fiber sheet. It may work printed but it would have to be pretty thick.

CZ457 Victor Titan Cheek Rest Spacer

5/8 Cheek Rest Spacer Fits Victor Titan Universal Cheek Pieces. Made to specifically fit a CZ 457 Pro Varmint stock.

Oil filter wrench (for Ryco Z418)

This is just another oil filter tool to loosen and tighten your cars oil filter at service time. The difference is that this one is strong and can be printed without supports. I found a bunch of models online that are great, but I…

Z4 E89 Silhouette

A present for a friend Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No Category: 2D Art

Suzuki DRZ400 Front Brake Hose Clamp 59243-03B01

Suzuki DRZ400 replacement Front Brake Hose Clamp. Model number 59243-03B01. I broke my clip after hitting a cow with my bike (no jokes). From the pieces I had left I designed this replacement clip. Print in PETG to allow enough…

HP Z440 Motherboard Tray

I got annoyed seeing empty spaces for screws with atx trays. -May need a pair of pliers or 4mm socket to tighten standoffs. As long as you aren't going too hard, the standoffs will stop once snug. -The opening is more than enough to clear…

Z440 Memory Fan Mounts

This allows for mounting of the Z440's memory fans directly above the ram in a case agnostic way. I printed this in PETG.

Wolfcraft Spring Clamp FZ40 / FZ60 Jaw replacement

This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…

Panels for case Kradex Z4AJ and RuiDeng DPS5005 or RK6006 DC-DC power supplies

This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…

CZ457 Mag Holder for Cabinet or Safe

Nothing fancy just a CZ457 22LR Mag holder I made for my safe. Holds 7 mags total I made mine from Carbon infused PLA 3 perimeters 20% infill I attached mine with Goop glue and let it sit over night before use. I edited this model after…

LOP for CZ457 Boyd stock

In short this was designed to give me options for Length of Pull for my CZ457 Pro Varmint with the Boyds wood stock. There are 3 models, 25mm, 20mm and 15mm The fit is not perfect around the edges but I got it close. Once mounted it is…

CZ457/Bergara Bolt Handle

Made to replace the original ball on my CZ457. Have 2 designs included; preferred the beehive style pictured due to the other having some slightly sharp edges however that might be your preference.

Z42 Prusa Mini Display Holder with power switch relocation

I wanted a more convenient way to switch the Prusa Mini on/off so this remix of the display holder to accommodate the the original power switch at an angle on the back. It also covers the top of the display control board to prevent…

Bosch adjusting device 10009551 part for fruit presses MUZ8FV1 and MUZ45FV1

This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are two Bosch fruit pulping attachment models that use this part : Fruit pulping attachment MUZ8FV1 , with Spare part: 0103…

Wolfcraft FZ40 Clamp Edge Banding Upgrade

Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap…

CZ455 452 512 METAL OEM Magazine Baseplate

This is both a “regular” height baseplate, and a “tall” one to improve handling of skinny CZ .22LR rifle magazines. This version specifically fits METAL magazines. I have a separate version posted to fit plastic ones. There is also a file…

Remix of MZ4250's Baba Yaga Horseman, but recently decapitated for Halloween

Remix of MZ4250's Baba Yaga Horseman, but recently decapitated for Halloween for use as a hood ornament on the Ghost Car im building for Halloween.

Logitech Z407 Speaker Stand Replacement

Designed to be as close as possible to the original Logitech Z407 speaker stand. I lost one of them during a move, so I used calipers to measure the one stand I had, created a replica in Onshape, and printed a replacement which worked…

Gear for Bosch MUZ4GM flour mill

This is a replacement for a gear that often fails in the Bosch MUZ4GM flour mill. Printing I recommend slicing with two perimeters and 100% rectilinear infill. While in general it is more effective from a strength perspective to slice…

BMW Z4 e85 Dash Vent Louver Parts

Used this to fix the internal air diverters in my BMW Z4 e85 dash that were broken and no longer adjustable, Replacing is pretty simple, follow youtube directions for how to slide the vents out (simple once you figure out how to release…

Uhrwerkzeug für Diesel Uhr Chronograph DZ4323

Werkzeug zum öffnen der Uhr (Batteriewechsel) Batterie: SR920SW / V371 Empfohlene Druckeinstellungen Infill: 20% Infill Layerhöhe: 0,15mm Print instructions Infill: 20% Infill Layerhöhe: 0,15mm

Suzuki DRZ400 Trail Tech Vapor bracket

A custom bracket for the Trail Tech Vapor for a DRZ400 which includes a bracket for the original indicator housing. I designed the bracket so that the indicator housing is angled to suite the design of the Vapor. Two Version…

Zuse Z1-Z2, Z4 type memory cell demonstration set

This is my interpretation of the operation of a single bit of memory as used in the Zuse Z1 and Z2 programmable calculators, and later for the Z4 computer. Most information is from pages 218-221 in the book described below. The original…

BMW Z4 (E89) Rear Roof Latch Cover

The cover I had on my car was broken, I made a replacement. Printed in PETG-HF, 0.16mm with 3 wall loops, and Hilbert Curver on the base

motorcycle grips Suzuki Desperado VZ400 VZ800

motorcycle grips for motorcycle suzuki desperado VZ400 and VZ800, quite comfortable, deliberately made them a little thicker than the original ones. Printed by ABS plastic Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

BMW Z4 Convertable Trunk Cover Clamps

2010 BMW Z4 - E89 - Convertable Original rear luggage cover clamps broke due to age Redesigned with M5-20 Screws and M5 Heatset inserts Print in ABS or ASA

Z440 Vented 5.25 Bay Covers

I like surplus hardware for my mini-homelab and when I wanted to add some additional disks to my Z440, I used these adapters to add them to my 5.25 inch bays. SMART promptly told me they were undercooled and I needed to do something about…

CZ457 MTR Wangenauflage/Cheekrest

DE: Da ich nichts Gescheites für diesen Einsatzzweck gefunden habe, wurde der Drucker aktiviert :-) Gedruckt in TPU, dann mit Klett auf den Schaftrücken geklebt damit es leicht zum Reinigen abgenommen werden kann. Hat schon 1,5 Jahre…

CZ457 Magazin-Schuh

DE: einfacher Magazinschuh aus TPU, der über das Original-Magazin (Stahl) gestülpt werden kann um es besser greifen zu können und als Schutz. Zusätzlich kann so noch ein farbiger Akzent gesetzt werden. Je nach Passform des Magazins kann…

Hager FZ44H Cable shunting cover bracket / Rangierkanal Profilhalter

I broke one, so I made one. Hope someone will find it useful. I Don't know if it is compatible to all Hager products. But for me as replacement it works nicely. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Max Rafts: Yes…

Z42 Mini Drip Tray

When I started using my resin printers, the need for a drip tray was evident, so here it is. By using the modifiers feature in Prusa Slicer it couldn't be easier to model these items in CAD and then use those modifiers to put perimeters…

IRLZ44N

The IRLZ44N is a high-performance N-channel logic-level power MOSFET.

Holder for UAZ469

Holder for an audio speaker or a mug with a handle. Designed for installation on the right ventilation grille of the metal dashboard of the UAZ469. Fastened with 2 screws. You can insert a can of drink or a bottle with a diameter of up to…

CZ457 6 and 12 Magazine Storage Box

By request, a collaboration with m1xstr, this is a pair of boxes for storage of CZ457, and similar, magazines. Holding either six or twelve magazines, these boxes will accommodate both 5 and 10 round magazines as well as those with…

crankcase saver suzuki ltz400

-youll need bolt a few millimeter shorter than oem… maximun 40mm long m6 x 1 -fit all years and fit 14T and 15T sprocket -print with no enclosure but with constant dryer/heater for the filament and creality glue for the build plate -print…

gear for grain grinder Grain mill for food processors 00461244 - MUZ4GM3

Gear inside of Grain mill for food processors 00461244 - MUZ4GM3 often breaks. This is simple replacement. Print Settings Printer Brand: RepRap Printer: Prusa i3 1.75 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 mm Infill: 100% How…

drz400 motorcycle veypor speedometer mount and switch housing toggle switch

this can hold a veypor and two toggle switches. good for heated grips and heated seat switches you need some m6 nylock nuts and some m6 bolts, cant remember the size this fits right between the handle bar clamps on my drz400E. Category:…

DRZ400 Plate Bracket Reflector

This is designed specifically to fit the stock holes on the Queensland number plate and the stock rear reflector from the Australian DRZ400E (Not sure what other models have, they might have them as well). A simple strong little bracket.…

scalextric z4 rear wing mk2

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/gOD9dpKZDO7 Scalextric 1:32 rear wing WIP Not perfect but a very good start Print Settings Printer Brand: Anycubic Printer: All-metal Mega Infill: 100…

BMW Z4/M3 controlarm rideheight adapter

To upgrade your Z4 E89' handling, you can use suspension parts from the E90/91/92 M3. On the right side Z4 control arm there is a ride height sensor. On the M3 that sensor is on the left side. This adapter fits the contour of the control…

Parts kit to adapt an airsoft L96 chassis to a CZ457

Just a little set of parts to adapt a WELL L96 airsoft chassis to a CZ457 22lr backyard popper. Instructions here: https://imgur.com/a/ja47I1v I printed these parts in nylon, but use whatever material you want. The large adapter piece…

Z42 Prusa Control Knobs

These knobs can be can be printed and PLA but should be printed in PETG. There are MK3 and Mini PLA Gcode files for all three version. 3mf files are also included for all three. To install simply pull your current knob off and press the…

CZ457 Stock

I'm reuploading my CZ457 stock. The stock is for CZ457 in .22WMR/.17HMR, it also fits a thick varmint barrel. Purpose of this is to have an option for a simple, cheap and reliable ergonomic stock for the CZ457 rifle. The stock has built…

Spare gear bread slicer - Z4265

Gear bread slicer - repair. Designed in ONSHAPE .

M3 and M4 3030 nut for Z42 spool holder

M3 and M4 3030 nut for Z42 spool holder from @Zelrick

Button cover Z407

Just wanted an cover for the controller volume of Z407🤷

Phone holder for BMW Z4 e85/86

Phone holder BMW Z4. The phone can be turned to horizontal and vertical position. The files are made for an iPhone 17 with a protective cover. No tools needed, can be removed anytime without leaving traces. The 3 parts are self…

DRZ400 seat mount repair bung

3d print, insert m6 nut, grind off nubs from broken OEM aluminum bit, instal & ride! Probably not safe to use these with an aftermarket rack. P.S. you should use the model with the step. It helps the plastics install a little easier…

Logitech z407 remote holder 35mm pole

Logitech z407 remote holder 35mm pole

Logitech Z407 bass box deco frames

I really like the Logitech Z407 2.1 system, but due to the fact that the bass box was just a black cube which did not fit very well in my more light deco, i wanted to spruce things up with some white self-adhesive film, but the edges…

RPG mini Stand marker -- fit on MZ4250s models

Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…

Kawasaki Z400 Rear Peg Delete

Utilize OEM Hardware to delete passenger pegs and cover area!

SKADIS Logitech Z407 Speaker Mount

I wanted to keep my Logitech Z407 side speakers off the desk for a nice minimal look so I designed this speaker mount for the SKADIS pegboard that is mounted behind my monitor. Fits the speakers in both the horizontal and vertical…

Filament holder for Z42 Prusa Mini Side Spool Holder

Bigger Shorter Cut

Replacement for Hager FZ44N left (or right if mirrored)

printed it in PTEG on Bambu P1S with 0.20/strength profile with PTEG support there are several parts. the side without and with cutout for the tiny cable canal with 90° angle which fits to a bigger canal on top of the big Hager piece