1 / 3
Bambu Lab P1/X1 Ultralite Head/Fan Housing — image 1
1 / 3

Bambu Lab P1/X1 Ultralite Head/Fan Housing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Super lightweight housing without losing too much structural integrity. The cooling fan and duct act as strengthening.

Rating
0 / 5
Likes
8
Downloads
76
Makes
0
Views
658
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Reduces weight of housing by 6~ grams and improves cooling of components on the main board as well as giving easy access to fresh air for the hotend cooling fan. 

Use a high temp filament to make sure it doesn't soften or warp when installed. (At least PETG)

Use of tree supports is the best for this and print at .2 or lower layer height.

Run a re-calibration after installing.

 

- Taken from original model description -

Two magnets with a diameter of 4mm and a thickness of 2.5mm are required. Use a little glue to stick it firmly, otherwise it will easily fall off due to the high temperature during the printing process. Be careful when tightening the screws during installation so as not to damage the screw mounting holes.

Tags