1 / 2
Sensor weather cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small cover/housing assembly for sensors and weather stations.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 90
- Makes
- 0
- Views
- 862
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
These parts combined form a wind/rain and sun shield for sensors to be placed outside.
On the bottom you can use a cable gland (threaded M12*1.5) to secure wires leading to the inside.
You need at least a cover and a base ring. To get more space inside add any number of rings. If you need a mounting surface you can add a “TopRing” part.
The complete stack can be screwed together with M4 threaded rod or long M4 screws.
The screws tap into the 3 holes in the cover part. All other parts then slide on the M4 screws/rods.