UMW - (Ultimate Minimalist Wall-mount) system.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable, Secure, Easy to print. Step file included for remix!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a living system, I intend to continue adding to it as time allows, and I hope others will too.
General:
Quick printing, low profile, versatile, and adjustable. With it’s miniature serrated locking french-cleat-like design, the backer can be used to mount:
- Framed photos
- Coathook
- Important papers/notes/unframed photos
- Small shelves
- Pistols
- Legos
- A monitor/small TV
- Jewelry
- Cables
- ETC…
The options are limitless. A Step file is included for making your own add-ons. Remixing is encouraged!
Leveling, removing, or replacing is easy. To swap items, just pull out a bit from the bottom and lift. The locking tab keeps things in place, even through earthquakes. It also maintains level when bumped. If you need to adjust horizontally, just push sideways and click it into the right place.
The base plates, or “cleats” mount using two #8 screws. They can also be mounted to 2020 profiles with m3/m4 countersink screws.
Why I designed this:
I love the Hex Storage wall for it's modularity, but sometimes you just want something with a smaller footprint. This is meant to fill that niche.
Printing notes:
Layer height: .15 or finer is ideal, but aesthetic only
Recommended Material: PLA or better
Supports: Most of the accessory mounts don't need supports. YMMV. I'll try to keep the need minimal, and if needed, to only require on-bed support. A brim should be used for hooks, which have minimal contact at the tips.
Infill: 15% Gyroid or triangle
Walls: 2-3
Other Modifiers: Print as oriented
Material Quantity: Depends on what items you print. I'm adding accessories as fast as I can design them and keep coming up with ideas.
I printed from Sunlu PLA 2.0+ on Centauri Carbon at .2 layer height with 25% Triangle infill, auto brim(orca default), and 4 walls.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out: