Pointer for Park Tool DT-3 disc rotor truing attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
original uses a 1/4-20 acorn nut which was lost, so the truing sounded terrible with just the bare threaded rod
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 1
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Motivation
shop lost the original acorn nut
we were then using literally just the bare threaded rod, which sounded awful against the disc rotor under inspection & often would catch on the holes in the rotor
original tool can be found here
manual found here, see part #4
Design
I ended up printing this as a lock nut to hold the position of my part along the threaded rod
takes a typical ¼-20 nut, press fit into the print
7/16" wide across flats
ultimately it works okay & is much more pleasant to listen to & use, but some printing defects caused the point to be sort of flattened, but I don't really care enough to fix it