LayersFactory
Report model
1 / 4
Mini Aether — image 1
1 / 4

Mini Aether

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsMakes & commentsRemixesCollectionsRelated

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!

THE MINI AETHER is a mini version of our Aether hypercar.

SIZE / WEIGHT:

  • Total assembly: Roughly 85 x 40 mm

  • Filament: We used roughly 20 g of filament using 5% infill.

MAKEABLE FOR EVERYONE:

  • Largest single part: 85 x 40 mm

  • Almost no supports: The only recommended support is on the wheel pins.

  • Snap together: Simply press the wheels on!

RECOMMENDED SETTINGS:

  • Resolution: 0.2 mm layerheight (0.1 mm for a better finish)

  • Infill: 5%

  • Supports: Yes, only needed on the wheel pins!

  • Brim: Not mandatory.

SUPPORT:

Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]

Feel free to share your makes with us on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)

Tags

carraceracingautomotiveracecarformula1f1carsscalemodelaethermclarensupercarsportscarhypercarferrarivalkyriemodelcarastonmartin