1 / 7
Car Wash Hose guiding Garden Hose Guide & Anti-Snag Block — image 1
1 / 7

Car Wash Hose guiding Garden Hose Guide & Anti-Snag Block

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Car Tire Ramp/Insert | Garden Hose Guide & Anti-Snag Block | 3D Print

Rating
0 / 5
Likes
5
Downloads
20
Makes
0
Views
288
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The Problem: A common frustration when washing your car. The garden hose constantly snags and gets stuck between your tires and the driveway, especially on block paving or flagstones. The hose falls into the gaps, interrupting your workflow and causing annoyance.

• The Solution: This 3D printed tire insert is a simple but brilliant fix. You slide it under the tire before you start washing your car. The smooth, curved surface (ramp) allows the hose to effortlessly glide under the car and around the wheels, completely eliminating the snagging problem!

• Benefits:

• No More Snags: The hose will never get stuck again.

• Save Time: Enjoy a seamless car wash without constantly freeing the hose.

• Hose Protection: Reduces wear and tear on your hose from sharp driveway edges.

• Simple Design: Quick and easy to print.

• Printing Tips:

• Material: PLA or PETG is fine, but PETG/ASA/ABS will offer better longevity and resistance to weather/heat.

• Infill: 15-20% is suggested for adequate strength and durability.

• Layer Height: 0.2 mm.

• Quantity: 2 inserts are enough for one side of the vehicle, but for maximum convenience, print 4!


 

Tags