i30 N/N-Line shift boot link piece for i30 PD FL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapting piece for the shift boot, when installing the N-style shift lever on a standard i30
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This piece helps solve compatibility issues when installing an N-type shift lever on an ordinary i30 PD FL.
It replaces the plastic piece that the shift boot is glued onto, and clips to attach to the 'skirt' (43713S0100). You can re-glue the boot to this printed piece (I used contact adhesive).
Second function: I had to shorten the neck of the reverse lockout piece (43713F2200), as seen on the image, because there wasn't sufficient distance for the skirt to move up and down. Since the clips with which the lock-out piece attaches to the skirt got trimmed, an alternative method is needed. This piece allows to join them using screws. Use the attached hole guide to help drill the necessary holes on the lock-out piece (watch out for top/bottom orientation), and put some M3 threaded inserts on the printed part.
I suggest printing in ABS/ASA or some other heat-resistant filament. I generally don't trust anything PLA inside a car, in the summer months...