18650 Battery Spacer Grid | Octagonal (6-21 Cells)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Triple-row 18650 battery holders (3x2 to 3x7). Robust octagonal grid for high-capacity packs, cooling & wiring.
- Rating
- 0 / 5
- Likes
- 104
- Downloads
- 309
- Makes
- 0
- Views
- 764
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
BOM: Printed with ROSA3D High Speed PLA Dark Blue
This is the "High Capacity" edition of my octagonal battery holder system. These 3-row wide grids are designed for building substantial battery packs, such as e-bike batteries, powerwalls, or large portable power stations.
Why use the 3-wide series?
Maximum Stability: Using a 3-row block creates a very rigid core for your battery pack, minimizing flex and stress on the nickel strips/spot welds.
Integrated Wire Channels: The signature octagonal geometry creates consistent gaps between every cell. This is critical in large packs for routing BMS balance wires safely through the center of the block rather than around the outside.
Thermal Management: The open-corner design ensures no heat pockets are trapped in the middle of the pack.
The Set Includes (Grid Sizes):
3x2
3x3
3x4
3x5
3x6
3x7
Printing Instructions:
Material: ABS, ASA, or PETG only. Do not use PLA for high-current battery packs as the heat generated by cells can deform the plastic and cause short circuits.
Fit: Calibrated for a precise friction fit.