Wooden Railway Hopper Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After making that porter, I wanted to make a car to join it, so here's a simple little hopper to go with it!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Share Alike
After making that porter, I wanted to make a car to join it, so here's a simple little hopper to go with it!
Support free! (Has some bridging, but if you can manage a benchy you can manage this)
Assembly is as simple as cleaning up & slotting all the parts together with a small dab of glue! For the wheels, put the side without the peg in first, then wiggle the other end around. This requires tight tolerances and will be frustrating! Slot in (& optionally glue in) the sideframes around the wheels, and affix body. You can also glue the body down if needed, but friction should be enough. The magnets need 2x 2*4mm neodymium magnets glued in, but I've also included a version with print-in magnets. (Print pause) Alternatively, there's also a hook & loop version if you don't wanna buy magnets :)