Wooden Railway Hopper Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After making that porter, I wanted to make a car to join it, so here's a simple little hopper to go with it!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
After making that porter, I wanted to make a car to join it, so here's a simple little hopper to go with it!
Support free! (Has some bridging, but if you can manage a benchy you can manage this)
Assembly is as simple as cleaning up & slotting all the parts together with a small dab of glue! For the wheels, put the side without the peg in first, then wiggle the other end around. This requires tight tolerances and will be frustrating! Slot in (& optionally glue in) the sideframes around the wheels, and affix body. You can also glue the body down if needed, but friction should be enough. The magnets need 2x 2*4mm neodymium magnets glued in, but I've also included a version with print-in magnets. (Print pause) Alternatively, there's also a hook & loop version if you don't wanna buy magnets :)