1 / 1
FX Impact M4 rukojeť napínací páky / FX Impact M4 Side lever handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FX Impact M4 rukojeť napínací páky / FX Impact M4 Side lever handle
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rukojeť k napínací páce pro FX Impact M4. Model obsahuje dvě variaty, návrh podle originálního vzhledu a návrh varianty zesílené šroubem M3 x 40/45 mm.
Doporučené nastavení tisku:
Tlouštka vrstvy 0,2 mm, 3 perimetry, výplň 20%.
Doporučený filament: PETG, ASA, ABS
Side lever handle for FX Impact M4. Model contains two variants, first one is by original design, second one is reinforced by screw M3 x 40/45 mm.
Recommended print settings:
Layer thickness 0.2 mm, 3 perimeters, infill 20%.
Recommended filament: PETG, ASA, ABS