Jon Hamm Dancing Meme HueForge Wall Art Portrait - Turn the Lights Off
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.05 – €3.73 net (excluding VAT)
For file: Jon-Hamm-Meme-Hueforge_0.4n_0.08mm_PLA,PLA,PLA_XLIS_3h36m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.39 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 3.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D-printed HueForge portrait of Jon Hamm from the viral "Turn The Lights Off" dance meme.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jon Hamm "Turn The Lights Off" HueForge Portrait
The Meme: This portrait captures Jon Hamm's iconic club dance scene from Apple TV's Your Friends & Neighbors (S1E8), which exploded as TikTok's "Turn The Lights Off" trend in late 2025.
In the scene, Hamm plays Andrew "Coop" Cooper—a disgraced financier who hits rock bottom, then loses himself in euphoric dancing under blue nightclub lights to Kato feat. Jon's 2010 EDM track "Turn The Lights Off".
The clip went mega-viral (20M+ views) as creators stitched it to moments of pure joy, nostalgia, or "dancing through the pain".
I made my own meme about it because I thought it was very fitting. Who else feels the same?
-> IPA hits different...
https://www.youtube.com/shorts/L_s66_mwsJo
Now in 3D: HueForge brings that blissful blue-lit vibe to life through filament painting
Only 3 colors are needed: BLACK, BLUE, WHITE
Printable even without a tool changer, AMS, or MMU. Simply change the filament manually. Since there are only 3 colors, only 2 changes are necessary.
Print Settings
- Layer height: 0.08 mm (first layer 0.16 mm)
- Infill: 100%
- Perimeters: 1
- Print speed: quality mode
- Nozzle: 0.4 mmLayer 1-10 (0-0.96mm): PLA Black (TD: 0.3)
Layer 11-12 (0.96-1.12mm): PLA Blue (TD: 3)
Layer 13+ (1.12-2.24mm): PLA White (TD: 8)
