1 / 11
USB-A male to USB-C male adapter — image 1
1 / 11

USB-A male to USB-C male adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Converts USB type A male to USB type C male

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Converts USB type A (male) :

to USB type C (male):

It is basically an USB to USB C cable but shortened, and I use it for programming microcontrollers with an USB C port instead of having a long wire on my desk.

Materials needed:

  • USB type A plug (I cut a broken USB wire and cut all the silicone/plastic away to get my plug): 

  • USB type C plug:

  • Soldering materials, optionally superglue and hot glue

  • 3d printed case (there is two versions of the bottom case, one with a hole for an LED which my USB C plug includes, and one without the hole)

Assembly:

Solder the legs of the USB type A plug onto the pads of the USB type C plug, matching +(VCC) to +, D+ to D+, D- to D-, and GND to GND

You can use the bare part photo as an reference

Then, take the bottom half of the case and push the soldered part inside the case and align it, you may need to push it a little:

Finally, you can snap on the top piece, making sure that the pin and hole align. You can also add some hot glue in the top piece as there is extra space to further strengthen it, and you can add superglue around the perimeter to make it stronger.

 

Feel free to comment if it doesn't work or you need help and I will most likely respond.

Tags