Mechanic LS720+ Dimmer Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement enclosure for the Mechanic LS720(+) dimmer assembly. Uses x4-M3x8 Countersunk Screws.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
You need:
The guts from an LS720+ USB-C dimmer module
x4 - M3x8mm Countersunk Screws
Adhesive Tape if you want to mount it
This is a replacement enclosure for the Mechanic LS720+ polarized light filter and LED light combo for digital microscopes. The stock housing was to tight and the adjustment knob on mine would rub against it and make it difficult to adjust. QOL improvement at best I suppose. I left the area where the shaft protrudes flat in case you want to use a different knob than the original. The enclosure fits the stock cord grips so no need to mess with anything, just switch all the internals over.
It's the perfect width to mount to 3030 extrusion FYI.