Smart Automatic Chamber Heater for Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Automatic chamber heater for Prusa Enclosure
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Still under development.
Check original creator for more information. I will not get into every detail of this project since original creator made a lengthy and quite detailed description of this project and explained it very well.
This is the continuation of said project. I placed all control and signal components to one PCB. The board neatly connects all components and adds screw terminals. Next step is to configure the code of the heater and gcode so that the printer can emit temperatures to the heater via slicer.
UPDATE 27.04. - The boards arrived but I made a crucial mistake. I used the wrong level converter. Now in the V2 that is resolved and I am using correct logic level converter for the OLED. I have soldered standalone logic level converter from aliexpress to correct pins and everything works. I used existing pins to connect them. New pictures soon.
UPDATE 29.06. - Added easy EDA files