1 / 3
FPV Motor Bell Gripper (TPU), 28xx motors — image 1
1 / 3

FPV Motor Bell Gripper (TPU), 28xx motors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flexible TPU shoe for 28xx drone motors. Protects the bell when using water pump pliers to change props safely.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
51
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Tightening M5 nyloc nuts on large FPV drone motors can be a pain. The motor bell spins, and trying to hold it by hand often leads to cut fingers or a slipping grip.

This project provides a simple yet highly effective TPU Protection Shoe / Sleeve designed to wrap around your brushless motor bell. It acts as a shield so you can firmly clamp down on the motor using standard water pump pliers (channel locks) without scratching, denting, or damaging the aluminum finish or the internal magnets.

Key Features & Compatibility
  • Target Size: Primarily designed for large 28xx series motors (e.g., 2807, 2808, 2812).

  • Flexible Fit: Because it is printed in flexible TPU, it has enough stretch to fit slightly larger motors or compress down onto smaller bell diameters (like 25xx) while maintaining a solid grip.

  • Heavy-Duty Defense: Thick walls allow you to use high-leverage tools (like pliers) to easily torque down self-locking M5 nuts.

Print Settings (Recommended)
  • Material:                   TPU (95A )

  • Perimeters / Walls: 3 to 4 (crucial for protecting against plier teeth)

  • Infill:                          30% (Honeycomb)

  • Supports:                  None needed (orient the flat side on the build plate)

How to Use
  1. Slip the TPU shoe over your motor bell.

  2. Grab your water pump pliers and clamp onto the TPU sleeve.

  3. Use your 8mm wrench to tighten or loosen the M5 propeller nut safely.

Tags