Adhesive Cable Clips for Swedish Installation Cables
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric adhesive cable clips for Swedish installation cables, with tested EKK and multiple STL sizes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric snap-in cable clips designed for round Swedish installation cables.
The clips have a completely flat base intended for double-sided adhesive tape.
The cable is pressed through the top opening and held securely by the flexible clip body.
Important sizing information:
Cable type and conductor size do not always guarantee an exact outer diameter. Dimensions may vary between manufacturers and product generations. Always check the actual cable diameter before printing a large number of clips. The outer diameter is included in every STL filename so that the correct model can be selected by measurement.
- Material: PETG recommended
- Print orientation: Flat adhesive base on the build plate
- Supports: Not required
- Layer height: 0.20 mm
- Perimeters/walls: 4
- Infill: 30–40%
PETG is recommended because the clip arms need to flex when the cable is inserted. PLA may work, but it is generally stiffer and may become brittle over time.
Mounting: Clean the mounting surface before applying the double-sided tape. Use tape suitable for the surface, temperature and expected load.
Safety notice: This is a 3D-printed cable-management accessory and is not a certified electrical installation product. Verify that the mounting method and cable installation comply with applicable local electrical regulations. Do not rely on adhesive mounting where a detached cable could create a hazard.