Dometic AC Remote Battery Cover — P/N 52025 Replacement (Deeper)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixes batteries pushing cover off. Full-face bulge adds depth. Fits B1600 B2200 B2600 B3000 Freshlight remotes. AAA.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Replacement battery cover for air conditioner remotes visually identical to the Dometic P/N 52025 (used with B1600, B2200, B2600, B3000, Freshlight series and similar units). Modified to fix the common problem of batteries pushing the cover off.
The problem: The original flat battery cover doesn't have enough depth for the batteries. They push outward, causing the cover to pop off or sit loosely — a common complaint with these remotes.
What I did: I found an existing STL of the cover online that was close but had the same issue. I imported it into FreeCAD and made two rounds of modifications:
V1: Added a localized bulge pocket on the exterior. Worked mechanically but had stepped margins that caught the batteries during insertion.
V2 (this file): Redesigned with a full-face 1mm outward bulge — the entire exterior is one flat plane. A 1mm deep battery cavity on the interior with 1.5mm side walls and rounded upper corners gives the batteries room. The bottom curve was extended to match the new profile.
Print settings (tested):
Material: PLA
All settings default (OrcaSlicer)
Supports: Tree (auto), Tree Slim style — needed for the lip overhang at the top
No brim needed
Orientation: Flat exterior face down on the build plate
Compatibility: Fits remotes visually matching the Dometic P/N 52025 / 3865200-32. May also fit similar-looking AC remotes from other brands — measure your cover before printing. Uses AAA batteries.
Tools used: FreeCAD 1.1.3, OrcaSlicer, Bambu Lab P1S
