Paint Can Opener and Stirrer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One tool: the thin hooked tip lifts paint can lids, the slotted paddle stirs the paint.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
One tool: the thin hooked tip lifts paint can lids, the slotted paddle stirs the paint.
163 × 26 × 5 mm
Tip thins down to 1.8 mm
Four slots in the paddle
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 18 min, 10 g.
PETG handles the prying better than PLA.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Abridor de latas de pintura y removedor. Sin soportes: 18 min, 10 g.
العربية
فتاحة لعلب الطلاء ومحرك.