1 / 4
ESP32-S3 3.5" Development Board Case (Holo9 Weather Station) — image 1
1 / 4

ESP32-S3 3.5" Development Board Case (Holo9 Weather Station)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A stylish and easy to print enclosure for the ESP32-S3 development board with 3.5" capacitive IPS touch screen.

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
102
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Intro

So here is my take on a stylish, easy to print enclosure for the ESP32-S3 development board with 3.5" capacitive IPS touch screen that I originally made for an internet weather station (Holo9 Weather) but which perfectly works for any other application (as long as it is fully controlled through the touch screen).

Hardware  🖥

I originally started developing the code for the weather station (and a few other apps) on an ESP32 CYD (aka Cheap Yellow Display), which is a cheap, well documented ESP32 board with a 2.8" resistive touch screen, but then decided that I wanted something a little more sophisticated, powerful (not that this matters much for a weather app), and with a much better, slightly bigger screen. So I ended up with what I would call a CYD on steroids and the only piece of hardware you will need for this project:

3D Model and Printing  🛠

Hand-crafted on FreeCAD (like all my other designs - thx to the makers) this should be an easy and fast print. With one minor exception (the opening for the USB port at the side of the main body) you will not need any supports. 

Filament. I used dark gray PLA for the front and foot and light blue for the main body. Looks really nice but feel free to use any color and material you like.

Printing. I use 3 bottom layers, 3 walls, and 30% infill but essentially whatever your standard settings are will likely work. Turn the front so that the outside is at the bottom and the foot so that it stands upright. Supports only on the side opening of the main body.

Assembly. 1.) Mount the ESP32 board to the front cover (there are 4 little notches that should perfectly fit the screw holes of the board - either add a small drop of glue to each of these or use a soldering iron to flatten the notches). 2.) Mount the main body to the front with 4 small screws (I use 3 x 15mm wood screws but any short M3 screw will do or you can just glue it) 3.) Mount the foot to the back of the main body with 3 of the same screws. Plug the USB cable in and you should be ready to go.

Software (Holo9 Weather) 💻

I am setting up a Github page for the Holo9 Weather app (MIT License) that will have a lot more details on installation and code (just give me a couple of days, I will add the link here). In the meantime I am attaching the code (v2.20) for the Arduino IDE here in case you want to give it a try (it gives you 4 different screens with weather info, a settings screen to set your location, metric/imperial etc. and allows for OTA updates). And of course you can use the enclosure for pretty much any project that runs on this specific board.

On a more personal note. This is the first design I am publishing on Printables (but I have 100+ designs/Things on another platform and planning to move them over to Printables, so stay tuned). This should be the new home for my designs.    

HOPE YOU LIKE IT AND IF YOU LIKE IT PLEASE LIKE IT!

Enjoy.

PS.: This post may contain affiliate links and I may I get commissions for purchases made through links. You can support me by simply ordering through these links (and it won't cost you any extra).

Tags