Christmas Tree Phone Stand | No Supports, No Hardware
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The stand is a gift box with a gold ribbon belt and a bow on the lip, topped by a terraced 3D Christmas tree.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn your desk, nightstand or kitchen counter into something Christmassy without losing a single bit of function. The tree backrest leans your phone at a comfortable 70° viewing angle, a deep slot holds it (with a case!), and a cable notch in the front lip lets you charge while it stands. The star on top and the recessed ornaments on the back are made for painting or a multicolor print.
The stand is a gift box with a gold ribbon belt and a bow on the lip, topped by a terraced 3D Christmas tree. Turn it around and the back is fully decorated: layered boughs, a beaded garland and 10 ornament domes. A faceted 3D star crowns the top.
It is one solid piece, prints without supports and needs no extra hardware. Designed by ModuMaker.
Features
Fits big phones with thick cases: slot is 15.2 mm thick x 88 mm wide (tested on paper against iPhone 16 Pro Max and Galaxy S25 Ultra, 77.6 x 8.2 mm, plus a 5 mm case allowance)
Cable notch (16 mm) for charging while standing; works landscape-free, portrait use
Stable: phone's centre of mass sits ~37 mm inside the back edge of the base
Single piece, no supports, no glue, no screws
Fully sculpted back: 2 terraced relief layers, 18 garland beads, 10 raised ornament domes, faceted star
Gift-box base with raised gold ribbon belt and bow (every edge chamfered so it prints clean)
Raised details are separate colour zones: great for AMS/paint-on, still looks good in one colour
Print settings
Printer / nozzle | Bambu Lab, 0.4 mm |
Material | PLA |
Layer height | 0.2 mm |
Walls | 3 |
Infill | 10-15 % (gyroid or grid) |
Supports | None |
Orientation | As exported (base flat on the bed) |
Overall size | 101.8 x 91.8 x 140.2 mm (fits any 256 mm bed) |
Volume | 207 cm³ (model), less is printed with infill |
Estimate (rough, not a slicer result) | ~103 g and ~4.6 h at 10 % infill |
Tip: no brim needed, the base has ~8600 mm² of bed contact. For the lightest print use 2 walls and 8-10 % infill; the stand stays sturdy because the tree is only 9 mm thick and the base is short and wide.
Colors (single color is fine)
Single color: print as is. Red, green or white all look good.
Paint-on: base red, ribbon + bow + star + garland beads gold, tree green, ornament domes red / gold / blue (as in the renders). The raised domes and beads give paint clean edges.
AMS multicolor: in Bambu Studio use the paint tool on: base (red), ribbon belt + bow (gold), tree (green), star + beads (gold), 10 ornament domes (red x4, gold x3, blue x3). A simpler 3-colour version: red base, green tree, gold for everything small.