251 models
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
Just a slight modification to the original insert-cable-holder provided in the Honeycomb storage wall project which adds a notch to more securely hold a variety of cables. Adds a half-hexagon cut out above the cable-holder hole.
This model is compatible with the lego system.
Double sided Notch Decoder. 0.2mm or 0.4mm thickness By placing the sharp end of the Decoder on the axle inside the lock, the operator can detect flat spots or grooves as they spin the wheels. These changes reveal the lock's combination.…
Guitar Neck Straight Edge designed for Fender type 648 mm (25.5 inch) scale length & Gibson type 628 mm (24.75 in) scale length. This will cover almost all makes and models of electric guitars. It also incorporates a 9.5 inch neck radius…
A tippe top is a very unique kind of top. If you spin it fast enough it will slowly tip over and then pop-up and start to spin on it's handle! This motion is very fun to watch and has captivated great thinkers throughout history. I have…
Photogrammetry “scanned” model of a corner notched arrowhead I flint knapped.
Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…
This remix was posted with authorization from the creator of the original scan, Xile6. If you would like a much higher-quality scan of the DualSense faceplate (this mod uses 5% of the original's polygons) that doesn't use any notches,…
This jig was designed to prepare the back of drawers using the specifications required for Blum TANDEM undermount drawer slides. Other overseas brands found on Amazon often copy these specifications for undermount drawer slides. Features…
I printed with PETG, 15% infill, 0.20mm quality settings, no support. I printed these standing up as they would be mounted on a wall. The notch was made in PrusaSlicer using the “add negative volume/box” tool.
This model is compatible with the lego system.
Einfache Fliesenkelle/Zahnspachtel falls man mal ein paar Fliesen verlegen möchte und seine vorhandene gerade nicht findet oder man gar keine besitzt. Abstand der Zähne 3mm, auf Anfrage kann ich auch Variationen davon hochladen.…
My attempt at adding GameCube-like notches to a 3rd-generation Xbox One controller. Just so you know, this is a difficult print, so use a low layer height and check on the print regularly. I recommend using PETG to avoid having the…
These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…
This is a remix of the original adapter from breakitbruce, I have added a notch to hold the old style of tracks in place.
I wanted to use Akio's excellent mod of Z-belt covers for Voron v2 to route the USB cable from the webcam, but I discovered that due to increased thickness of the cover it didn't fit under my Z-rail, which was positioned, in accordance to…
Lidded gridfinity bins with a click-in-place sliding stackable lid. For storing very small parts you don't want spilling out. The lids have a notch that click-fits into place so a finger can easily slide a lid off, but gravity can't.…
I needed a notched spatula for distributing some glue across a large surface. Since I just came back from the hardware store and was in no mood for another trip, I quickly checked Prusaprinters.org for a potential replacement. There was…
I remixed this specifically as a support device for accessories I'm working on. Primarily these are cup and bottle holders at the moment; see my profile for the things.
Brandon made a really nice tweak that made this fit better, but I really liked the filament notch from the original design here . This modified version just takes Brandon's version and adds that notch so that it's easier to use with…
Made quite a few pre made notch templates for my bicycle project, for multiples angels. Will add more sizes and also try to figure out a model scale to pipe diameter ratio. Name convention is: M - Master (pipe you are going to notch) S -…
Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film The…
"A OpenScad file so you can create your own custom ring for any cardboard spool. Use the customizer in OpenScad to tweak the rings to your liking. You can add notches to the rings so they do not spin by themselves. I have included…
A simple 100mm (4"), flat, flexible resin spreader with one flat edge and three notched edges with notch sizes approximately 3.3mm (1/8″) 5mm (3/16″), 6.7mm (1/4″). It's a lot like the similar looking spreaders that you can buy for a few…
This model is compatible with the lego system.
This model is compatible with the lego system.
The Nu-K Riser’s side wall attaches securely to the frame of your K1 3D printer. It provides a designated chain notch.
This fusion file lets you design your gate just how you want it for the HHL GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is that…
Fulton Woodworking Tools and Accessories (and maybe other manufacturers) make 4 way pressure clamp kits like this one: https://www.amazon.com/dp/B073QSF8JR They include a small number of notch bars, which allows some adjust-ability in how…
Simple remix of the folding razor blade cutter except there are some notches in place for 45 or 68 deg. cutting of filament. This supports both 1.75mm and 2.85mm filament in 45 degrees. There is only a 1.75mm hole for the 68 degree angle…
I did some decor tiles in the room. To apply the bond evenly, I needed a tile scraper. I could buy them and use them, but I have a 3D printer so I'll have to make them. It was modeled to be approximately 4 inches by 6 inches in size.
Rotary attachment for grinding the tang from frets Fits threaded foredom rotary tool from Stewmac, same threads as Dremel nose(3/4-12 thread) Hardware needed 2 - M2x5x10mm hex head bolts 2 - M2x5 nuts 1 - M3x14(or longer) 1 - M3 nut Use…
This model is compatible with the lego system.
I wanted to put lids on my sideboxes, but wanted to make sure they were easy to open. I saw some models with tabs, but I didn't want my printer to take up any additional space, so I opted to add a simple notch. I attempted to shape the…
This model is compatible with the lego system.
By far the coolest RC printable I have done. Kudos to @ProfJohnny_823077 for all his efforts designing this awesome RC skid steer. Adding my personal touch to an already phenomenal model, I added a notch at the bottom of the motor cover,…
0,2 layer height 5 wall 4 bottom 4top layers
175mm notched trowel for large format tiles, with hook 8*8mm spacing 3-4 Top / Bottom Layers 3-4 Perimeters
model with firefox notches and designed to preserve shielddrops
This cookie cutter will make a slight mark for where the arms it within the body. Great guides for decorating with icing. You can use the interior lines or not.
I have these wird blades with three notches, these did not fit in the original model. I you want to check if your blades fit here please check the drawing with the measurements. Secondly I added a magnetic blade guard, optimized for…
1.2mm thick. Notches are 2mm 3mm 6mm and 6x3mm. Enjoy 8mm hole for hanging.
Dudd / Missing Notches Interlocking puzzles by Stewart Coffin (STC #129 / 129-A) Dudd and Missing Notches are two closely related puzzles by Stewart Coffin. Both have the same objective: assemble six burr pieces into the configuration…
Added small notches, followed OPs instructions and now I can print and use without breaking!
Precision 3D Printed Nozzle for 310 ml Adhesive Cartridges Product description This versatile 3D printed applicator nozzle is designed for controlled dispensing of thick construction adhesives and sealants from standard 310 ml cartridges.…
This is a blank task list with on-off check marks. You can directly write on the plate, or the plate size is adjusted for 40 x 12 mm labels. The bottom of slide switch should be printed with a different color. Slide in all switch tabs…
This is a tool for the 48.5mm threaded, external cup bottom bracket with 16 notches. It will fit a standard ½ inch drive and can be used on a torque wrench. Print with the strongest material you have with at least 5 perimeter, possibly…
fits to macbook apple silicon models, newer ones with a tick screen and notch on top, the ones that have M1/M2 model cpus.
English: 3D-Printed TPU Door Wedge with Customizable Disk: A Top-Notch Doorstopper Introduction: The 3D-printed door wedge is an innovative, multifunctional accessory made from TPU (Thermoplastic Polyurethane). This doorstopper stands out…
I keep exploding "store bought" arrow notches. I wanted to make a model which would be stronger and to be able to print. Its still the first version. I'll try to improve it as I test it.
This is a reproduction of the arrow head and notch used on Susan Pevensie's arrows in The Lion, the Witch, and the Wardrobe. I'm hoping the representation is fairly accurate based on the images I have found on the internet. There are…
Update 9/26/26 - Update! Better looking design & added compatibility with iPhone Magsafe. Phone or iPad stand. Designed ground-up in SolidWorks, but a remix of PhD3DP's phone stand, which was also a remix of BCN3D's phone stand (…
Für eine kleine Fläche Fliesen wollte ich keine Zahnkelle/Glättekelle kaufen. Gedrucktes Modell war erfolgreich im Einsatz. Habe verschiedene Varianten mit unterschiedlicher Zahnung hochgeladen. ----------------------------------- I…
I liked the battery door on the notched rail stock, but I didn't want to invest in buying the notched rails so I designed my own. I only tend to extend mine a little bit with my already lengthened stock, so I figured a printed model would…
A horse-themed device stand that allows you to view and charge your while it sits on this nice stand. I kept all the features designed by @JR and simply added the notch for the convenience of charging your device.
This model is compatible with the lego system.
Made to make a build easier in a first attempt into the world of fabricating build steel tubing. 90 mm to 140 mm OD tube/pipe Lightning infill for speed - it will be quite soft and will split if squeezed too much, I had no reason for…
This spreader has two notched sides. The larger notch is 6x6, the smaller is 4x4. Increase the thickness if you want to use a stiffer spreader.
This fusion file lets you design your gate just how you want it for the Removable-Gate-GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models,…
In an upcoming project I need to spread glue evenly with a rather small notched spatula. I don't know where to buy such, but I know some FreeCAD. 😁 In the dim spreadsheet you can alter the values to create a spatula with individual…
slightly rounded notched spatula / adhesive spreader. You can easily print it in PETG or PLA and it also fits to smaller printers as is Prusa MINI there are circles on bottom plane that could help a bit with shrinking
Parametric bin and grid, with x, y, and u. The stacking lip has notches to prevent sliding of stacked boxes No magnets. Recommended way of using it: For the grid, just use as-is. Open the file, edit x and y, and export to your favorite…
Ein paar einfache Schoner für Schraubstöcke mit 100mm Backen mit Einkerbungen für Rundmaterial. Die Schoner passen bei mir so genau, dass keine Magnete benötigt werden.
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- Disclaimer: Posted as original design because the designer Keep Making didn't post it here. He made a dedicated…
Overview This is an improved version of Olympia's smoother parametric gateplates with a thread holder optimized for FDM. The original was meant for resin printing but I find that resin gates feel less pleasant than FDM, as the stick…
This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 ( https://www.adafruit.com/product/5100 ) or ( https://www.adafruit.com/product/5128 ). The difference with this design versus my…
a 3mm notched trowel / scraper for spreading applying adhesive
Si tratta di un supporto per una perforatrice quadrata (quadrato da 6mm) acquistabile su aliexpress/amazon che vi permetterà di forare floppy disk 5 1/4 sul lato opposto per utilizzare anche la seconda faccia dello stesso (deve essere…
I developed this tool for removing the bearings of a Wheels Mfg BBRight bottom bracket for Shimano (24mm axle). The sleeve uses the notches in the bearing cups to position it properly. Only a sleeve for the cup tool size 48.5mm/16-notch…
The stock Redcat Ascent 18 battery tray doesn't give any room to access channel 3. This is a copy of the stock version with a notch to make it easier get a connector into channel 3.
This is an updated version of the Emitter from this amazing Lightsaber project: https://www.printables.com/model/542429-lightsaber-rp2040 The Emitter was not screwing in completely with the Blade Holder placed inside. I have shortened the…
This fusion file lets you design your gate just how you want it for the Bibben FDM GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is…
A companion to my Mini Stealthburner push fit remix that should also work with FRDC's original mod . This provides clearance around the push-fit connector.
Removed 2mm x 41.5mm notch to allow betweener to clear the chain support
Removable Gate OEM is a project designed to bring the removable gate system to OEM Gamecube Controller shells in the form of a small DIY kit. This is a parametric notch builder tool that allows you to make uniquely notched gateplates that…
This Thing is just a simple notched hinge, with four 3.5 mm mounting holes in the base and one in the arm. By notched, I mean that the arm has detents (two, 90° apart) that catch on a springy "cam", to make the hinge lock in either the…
I printed the original design in Prusament PETG black at 0.2mm. When I went to install it, I unfortunately realized the power on the charger base of the iRobot Roomba 690 Robot Vacuum plugs in on the right, not the left. I sliced up the…
Derived from Serentos's work, for older notchless versions of the Quadcast. This can be used with only the original hardware and accepts an additional screw & bolt for sturdier results. Printing Tips Print with high infill and thick…
Use any printing material. PLA seems best. Print settings are nozzle 0.4mm and layer 0.2mm or 0.15mm. The frame fits all common 7" e-inks. The control board is specially used based on esp32 - ESP-INK . Description of the connection,…
Accessory for notched FITS base in the Frunk of the Mustang Mach-E. Including STP and .F3D data for your modification. Print this on its side for better strength and add it to notched FITS base on my profile.
Square notches in 1/8" and 3/6" on the 2" sides and optionally ¼" notch on the 3" side.
I made this for our sectional armrest. It matches the cupholders you can buy from lovesac, but has a notch cutout for the handle of a mug. I printed it with Elegoo wood PLA and plan to sand it. I printed it with the “side” of the model on…
I noticed newer BOSS pedals made in 2024 can also contain a notched area for the 9v adapter. Some of the older pedals have the 9v plug floating, while some pedals have it justified at the bottom. I took the plate off, measured the notch,…
Plastic sawguides are great… except that often they're softer than the materials being sawn. Now make square cuts with confidence : this tool is reinforced with hard steel dowels *. Interchangeable jaws accept different material shapes.…
Thanks to theronin for the great box. I cut the box with Tinkercad and put it together larger. Printed with ABS Box 100x60x44 with original lid Box 100x80x44 with lid 100x80 Box 130x60x36.5 with lid 130x60
This is a notcher for making cardboard boxes. It only works with EK 1 3/8 square whale punch. Use 5x25mm bolts and wing nuts. https://youtu.be/q_VuBX7ZUP0?si=cfT710rO5n0dbzSr
I added a Negative Volume cylinder in PrusaSlicer to create the notch. The model preview will look odd, but it's there. The original model is otherwise unchanged. I also printed with different PrusaSlicer settings from the original —…
Remix from @tjdesign's tray that includes a notch to insert the marker between the dividing wall.
I repair bikes & came across a bottom bracket tool that I didn't have and needed quickly for a job so I designed this to fit 46mm BB with 16 Notches . Wheels Manufacturing BB Tool. Socket versions didn't work for me so I added a handle so…
You could buy a Worker Blaster stock, or a copy of the Chinese factory part, or you could buy 8mm rods and grind and file like a hero, or you could buy 5mm steel round bar and put this printed notched cover on. In the photo, the whole…
This is a reworked notched gate. It's symmetrical and unlike the oem gate, places the stick in the center.
most medical facilities are asking for no branding as it increases the difficulty for disinfection. I can't say how thankful I am for the strap file so I hope you'll forgive my debranding remix. Also I wanted to avoid people with very…
Simple Clip-On Cover, 20cm Cover for Alu Extrusion Nut 10 Type B; anything with 10x6mm gap should work.
50mm Notched Round Bases for Tabletop Miniature Games in five varieties (Porous Rock, Rusted Plates, Asteroid Surface, Broken Sidewalk, and Broken Concrete). Includes supported versions. Usable for any modern or sci-fi games that uses…
These are notched remixes of Christian Engelmeier's toolbox lids. While the originals will probably serve fine for most, I have large fingers and often bite my nails, so I sometimes had difficulty using the bevel to open the toolbox lid.…
This will fill the FITS socket in the Frunk of the Mustang Mach-E. Including STP and .F3D data for your modification. It is notched to allow for accessories to be added to it and changed out. Same basic concepts as FITS itself, but allows…
Print with a brim (inner / inside brim only). Supports are optional, if you prefer to use them.
This part is for vw mk4 users that uses grills withouth emblem I reccomend using ABS or ASA, PETG should work too.
![[Remix] Notched DualSense Controller Faceplate](https://media.printables.com/media/prints/1012330/images/7694595_bedd3f61-5183-4a11-a9c8-f0f318f582a1_809cb393-9e02-4056-ba76-01e7cc07a431/pxl_20240919_014400529.jpg)
