1 / 3
Slide-in case for C64 Pi1541-III — image 1
1 / 3

Slide-in case for C64 Pi1541-III

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A slide-in case for the C64 Pi1541-III project.

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

This is a simple two-part case for tebl’s C64 Pi1541-III board and its display panel

 https://github.com/tebl/C64-Pi1541-III

The board slides in on rails and the front plate locks everything in place. Both parts print without supports.

Features

  • Slide-in design: the board sits on printed rails

  • Front plate with cutouts for the OLED, tactile switches, and the rotary encoder.

  • Two spacers with locating studs rest on the display panel and hold the plate at the right distance.

  • Two stems on the plate take M3 screws, so you can fix the panel to the plate before sliding it into the case.

  • Cutouts for the two IEC DIN sockets, the 5V DC jack and the Pi’s microSD slot, plus vent slots in the top.

  • Engraved labels: “5V” and “IEC” on the back, “Pi1541 III”, “B” and “I” on the front.

  • Optional text inlays, so you can print the front lettering in a contrasting colour.

  • Recesses  underneath for rubber feet

Print settings

  • Shell: print standing on its back wall, with the open front facing up. No supports. The STL is already in this orientation.

  • Plate: print face-down, with the spacers and stems pointing up. No supports.

  • Layer height: 0.2 mm

  • Walls: 3 or more

  • Infill: 20%

  • Material: PLA or PETG

Hardware

  • 4 × M3 self-tapping screws. Two go into the plate stems to hold the panel, and two go through the plate into the pilot holes (2.7 mm) in the case bosses.

  • The pilot holes are sized for self-tapping. If you prefer heat-set inserts, enlarge them to about 4.1 mm

Tags