Surface Mount for the Ethernet Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An accessory Surface Mount for Ethernet Clip by Rob
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 49
- Makes
- 1
- Views
- 406
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An accessory mounts for 2-, 3- or 4-cable Ethernet Clips designed by Rob (https://www.printables.com/pl/model/71262).
To be stable, clip have to be tight fitted, so I made an additional placeholder which you can place instead of a cable.
Mount has a flat surface so you can use double-sided tape. However, if you want to use a screw, there is a prepared area that you can pierce.
Checked with a 2,5 and 3,5 mm countersunk screws.
The models have been arranged in the position that gives the best effect (IMHO).
I print them with PLA on glass cleaned with IPA, without any adhesion improving agents, without support or brim. 0.4 mm nozzle, layer 0.2 mm, 100% infill because I want to be sure that the printed elements will be useful even if there are printing mistakes.
(I did not mark the model as a remix of Rob's Ethernet Clips because it is an addition to an existing model, not a modification)