Hand Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.12 – €7.48 net (excluding VAT)
For file: Hand Holding Remote v3_0.2mm_PLA_MINI_7h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.80 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 7.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Give your remote, glasses, or whatever, a hand. UPDATE: Print pauses for a sand pour! Organic supports!
- Rating
- 4.92 / 5
- Likes
- 1,690
- Downloads
- 5,410
- Makes
- 33
- Views
- 28,145
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used Polycam, Blender, and Fusion 360 to create this low-poly remote holder.
I'm excited to use this workflow to make more things!
Print it with some shiny PLA to get maximum reflections from the faces of this low-poly design.
Print with supports:
Use the 3mf file in Prusaslicer or the gcode for my setup.
Consider scaling up a bit for large remotes.
I also highly recommend that you follow @Misha.in's make of the design:
A great model that enlivened the living room. First, I printed out the attached gcode, but I found a few flaws in it. Mainly it was very light and fragile. Therefore, I doubled the number of perimeters to 4 and poured sand into the model during printing. Now the hand is steady as a rock.
Also, Special thanks to @TritonPrint3D for the photo. Check @TritonPrint3D on YouTube: