CHiQ Fridge Replacement Shelves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a design to replace the shelves in my CHiQ Fridge. -Long design -Short design -Joining piece for long design
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 100
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Made a design to replace the shelves in my CHiQ Fridge.
-Long design
-Short design
-Joining piece for long design
_____________________________________________________________________________________
Printed with Anycubic Kobra Go - Using eSUN Grey PLA+.
The short shelf can print on it own, make sure to use tree support with auto painting. There are some large overhangs that need a bit of supporting.
The long shelf I cut in half using Prusaslicer and then slid into the the joiner. The joiner itself is a tight fit. I allowed a 0.5-1mm clearance but it can still be tight - if needed print a small test cut and see if pieces will slide through. If not scale up slightly to allow a bit more space.
-Same style of supports when cut in half. Large overhands need a bit of tree support but nothing extreme, let prusaslicer do the work for you.