Alien Runcam Split mounting plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a Runcam Split on an Impulse RC Alien drone frame using the stock screws. This mount matches the angle of the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount a Runcam Split on an Impulse RC Alien drone frame using the stock screws.
This mount matches the angle of the standard carbon mount, and removes the need for the stock plastic parts.
Remove two screws from the back of the runcam. These are replaced by two M2 screws from the Impulse set, with the two tiny O-rings between the plate and the camera. Impulse screws set the angle, and Runcam-provided screws hold the mount from the sides.
The new version has four holes for mounting the camera - I'm only using two of them and it's been fine. There if you need them!
You might need to tidy the holes up a bit with a careful drill.
Category: R/C Vehicles